- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you may wanna check if the paper that your using is a laser paper, check the mp tray, reload the paper and check the settings on your computer using thicker needs to match the setting on your driver you may also wanna check if your printer can do a stand alone copy so that we can identify if this a hardware issue or a driver issue.
hope this will help u
The sensor at the back of the printer is either stuk or out of position open the back of the printer and see if there is a little black lever sticking out if so check it for movement if it sticks yuo have to remove the back paper guide and reseat the lever in its correct position
open the mp tray locate 2 white plastic egg shaped piece on the ends of the steel rod gently push one or the other towards the back of the machine if the paper jam error message is on then the roller will turn as soon as you give it a push re load the paper open and close door a or e printing should resume that white piece works with the paper lift to get the paper up to the in feed roller
The MP E error relates to the registration assy on the rear of the machine. There are 22 possible causes of this error.
I suggest you get a service manual for the machine and work throught the easier checks one by one.
You can get a manual from http://www.TheServiceManualShop.com or http://mikeburton.tradebit.com/