Question about LG WFT1071TP Top Load Washer

1 Answer

Water drains out

Water drins out

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 210 Answers

Check the bellows at the bottom to see if it is deformed or has an obstruction. It is also possible that if it drains as soon as the power is turned on that a triac in the main power board is gone. You would have to change the board.
Sgt 48

Posted on Jun 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore Elite HE3 and I keep getting f2 error I cleaned the filter out and it still did not work Had a repair man come and he told me i needed a new pump I put it in and it still dosent work Also...


I would check all hoses for objects and proper drain install. Drin pipe too low water goes out gravity, too high and water is harder to pump out if at all.

Jan 17, 2014 | Washing Machines

1 Answer

Service mode reset


does your machine have a drain trap-clean that out-if you still are getting the message,there may be a problem with you drain pump-check it for blockage. the check inlet means you have a water supply problem-either blockage or no pressure coming into the machine-both supply and drain can get clogged and bring your laundry to a halt-cheers Denny

Oct 19, 2013 | Miele Washing Machines

3 Answers

Wont always drain and clothes are wet, pump has been replaced by repair man still happens


MAKE SURE YOUR OUTLET HOSE GOING TO THE DRAIN IS NOT BENT THIS CAN CAUSE THE WATER NOT TO EXIT PROPERLY, THE RINSE CYCLE IS RUN BY THE TIMER, THE TIMER CALCULATES THE TIME FOR THE SIZE OF THE LOAD, IF THE HOSE IS RESTRICTED, THE WATER WILL NOT EVACUATE THE WASHER IN THE AMOUNT OF TIME GIVEN BY THE TIMER, AS A CONSEQUENCE YOUR CLOTHING MAY BE DRIPPING WHEN YOU REMOVE IT OFF THE MACHINE,

GOOD LUCK I HOPE THIS FIX YOUR PROBLEM!

Feb 02, 2010 | Kenmore 3.8 cu. ft. HE3t Front Load Washer

1 Answer

GE Drain Hose


Hi, Does this washer have to pump the water up into a drain? If it is possible, it would be better for the machine if you can bring the drin pipe closer to the washer. I know it is not always a possibilty. The longer the drain hose, the harder it is on the washer and sometimes the cloths don't spin out as dry as they will with a short drain hose.

Vic

Jun 20, 2009 | GE Profile WPRE6100G Top Load Washer

2 Answers

My top loading washer does not spin out the water


check: 1-drin hose 2-drain filer 3- no spin mode maybe you selected

Jun 08, 2009 | Washing Machines

1 Answer

Won't empty water


i assume you mean dishwasher and not washer ck drain hose under sink if not installer properly hose tends to pull down and kink ..should be installed vertically not horizontal also be sure to clean under inside screen in bottom may be plugged also have you replaced disposer or installed one recently if so be sure plug in drin connection has been knocked out..if that is a washer get as much water out as possible lean washer backward against wall pump may be plugged pump just twist locks in bottom of tub and hose clamps can be removed with fingers NO TOOLS NEEDED!!!!!!!!

Sep 04, 2008 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Neff W4380 error or warning '03'


Hello there,

when the machine makes drowning sounds and beeps error dry (while trying to drin out) blow strongly into the drain pipe. It should result in a higher flow of water out the drain pipe and error 3 should go away.

Jun 02, 2008 | Neff W4380X1 Front Load Washer

1 Answer

Smoking washer


once you get the front panel off check the drain pump while your in there right now get a flashlight and look very closely at the holes in the tub for something like a nail or screwhead or something small enough to have slipped down in one of the holes of the inner tub and be jamming it now when you check the drin pump be warned there will be water still in the pump and tub so put down a bunch of towels

Mar 30, 2008 | Frigidaire FEX831CS Top Load Stacked...

Not finding what you are looking for?
LG WFT1071TP Top Load Washer Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...