Question about Marantz SR8001

1 Answer

For no reason I know of, my Marantz SR8001 will not come on and the display will not light up. It will not respond to activation using the power button on the display panel, or the power activator on the remote. All that happens is that the standby light continuously blinks. I goes off for a half second when the remote power on/off button is pushed or the button on the display panel is pushed. I did try resetting the unit by disconnectin the power cord. It did not respond to that either. Is there any thing else I can try before I send it back to Marantz?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,557 Answers

Blinking power lights are a factory setting to inform the customer there is an internal electronic fault. and the unit needs to be repaired by a service pro in 99% of cases the owner can do nothing to fix it.

send it in

best luck

Posted on Oct 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Marantz sr3053 stuck in headphone mode


Usually the headphone jack is like a mechanical switch and it's probably just not making a good connection inside. Use the correct size headphone jack and insert it then remove it maybe a couple of times and see if that fixes it.

Apr 18, 2014 | Marantz SR8001

1 Answer

I have a Marantz SR 8001. The front display lights went completely out, but the blue lights over the selector knob, volume knob, and the HDMI blue light comes on. I was setting up a Logitech 1100 remote...



Hello,
You have a nice piece of Stereo...I believe you have mistakenly selected the" display mode OFF" function..,Here is the info that you can reactivate it..
If you need a soft User Manual here is the link for it too..

Take care and please
Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)...please insert some words in "
My Testimonials "
Hope this helps!

------------------
" display mode OFF"

You can select the display mode for the front display
of the SR7001.To select this mode, press the DISPLAY on the remote control or the front panel.When this button is pressed, the display mode is switched in the following sequence.Input Mode ? Surround Mode ? Auto display OFF ? Display OFF ? Normal Mode ? Input Mode Normal Mode: Displays the selected input function. If the function has been renamed using the Function Rename feature (see page 26), the renamed name appears on the display. Input Mode: Displays the input mode set via the Function Input Setup feature (see page 25). Surround Mode: Displays the status of the selected surround mode. Auto Display Off mode: The display is off. But, if you make a change to the unit such as the input or surround mode, the display will show that change, then go back to off after about 3 seconds. When changing the volume, it is not displayed. Display Off mode: The display is off completely. Note: • Only the DISP indicator will be illuminated on thefront display in display off condition
http://www.scribd.com/doc/53431794/Marantz-SR-8001-Owners-Manual

Jun 23, 2011 | Marantz SR8001

1 Answer

Plugged marantz sr8100 into 230V outlet without transformer. Did this likely cause irreparable harm to receiver?


Hello
If you have plugged in to 230AC with voltage settings was 110VAC, the transformer has been damaged already [opend winding]. If the voltage settings was 230VAC itself, there will be no harm to its internal transformer. Anyway, open it, anc check the fuses. In some cases, fule only will blow out, preventing from furhter damages. I'm not sure about it, but check it. If the fuse only has blown out, and there has no harm; you are lucky I should say. OK.

Apr 07, 2011 | Marantz SR8001

1 Answer

Hi, my Marantz sr8001 is on standby mode, can you show me how to reset standby mode. Thanks


Mine is doing the exact same thing! All I want to do is get it OUT of standby mode!

Sep 13, 2010 | Marantz SR8001

1 Answer

Marantz sr8001: standby light blinks rapidly,


Hello there Ed.

For anyone that has ever had such an issue with a MARANTZ SR series (6001. 7001. 7002. 8001...etc...) issue a question and I do HAVE the answer.

I could be just anything, or just the low quality binding posts used by MARANTZ for that.

Please describe to me in details how you've connected your speaker wires at the back, and give me description when and how did this problem came up.

Kind regards
Evangelos

Oct 17, 2009 | Marantz SR8001

1 Answer

What type of speaker wire terminals does the Marantz sr8001 allow?


Hello there.

These are blind posts (i.e the unscrew back) but will not allow you to unscrew them fully to use spades.
Only bananas (of any type) and bare wire (do not recommend it).

I own the same SR and faced many issues (even going into "protection mode") due to bad quality binding posts used on this machine.

For any clarifications (specific type of terminals) let me know.

Evangelos

Oct 07, 2009 | Marantz SR8001

1 Answer

Marantz SR8001fail to standby mode, will not reset


Test all your speaker impedances and check for shorts on both wiring and speakers. Use a digital multimeter. If you still have an issue, disconnect all speakers and test receiver. If you still have a problem, post a comment and I can help some more.

Aug 07, 2009 | Marantz SR8001

1 Answer

Ps3 to marantz receiver to sony brava lcd tv


Loop the ps3 through the tv and out to the receiver. You only need audio going to the receiver.

Aug 14, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

Shuts off !!


check your output stage

Nov 18, 2007 | Marantz SR8001

Not finding what you are looking for?
Marantz SR8001 Logo

Related Topics:

517 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

73691 Answers

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...