Question about Visonik V15S4 Car Subwoofer

1 Answer

I need to move the amp off of my visionik vbx12a sub to the front of my car but when u remove the amp off the sub u realize there isnt a back to the amp so the its circuits are just out there so where would i put the amp?

Posted by on

  • fred j
    fred j Oct 14, 2010

    why do you need to move the amp at all . all amps should allways have a sealed electronics from anything comming in contact with the circuit board. some companies put a lexan clear back to see the circuit board,



    let me know the purpose of the amp move is for

  • perrym1 Oct 14, 2010

    i need to be able to lower or raise the level due to the neighborhood i live in elderly people dnt like it lol but the amp if you unscrew it off the box the circuts are there i do not know any sites where u could see a picture of it

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 127 Answers

Maybe you can build an amp rack some where else in the car or behind a pannel but make sure you use some kind of 12 volt fans to keep the amp cool . then extends the wire to the subbox and then you have to disconnet the subbox and move it not the amp


caraudioquestion@gmail.com

Posted on Oct 14, 2010

  • perrym1 Oct 14, 2010

    this is with a vbx12a subwoofer

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i split ohms on 10in.dule coile visionik sub.


IF 4M / 4M = 2M and 4M + 4M =8M
then 8m/8M +4M=8M right ?

Jun 01, 2015 | Car Audio & Video

1 Answer

No sound from subs


You need power to the amp. If the light on the amp is not on then your amp is the problem. Get power to it.

Nov 10, 2013 | Phoenix Gold Xenon-400.1 Car Audio...

1 Answer

I have a Sony Xplod 800w Amp running a 10' Sony Xplod Amp....i unhooked the amp to do some moving and i tried to put it back in today and it didnt have any sound coming from it! I did notice the power...


it sounds like it could be a blown channel in the amp. if the sub was blown it would still work just sound horrible. i have blown many subs and amps. you can bring it to an audio shop near you and they can fix it. i just got one of my channels fixed for 35$

May 11, 2011 | Sony Xplod Car Audio Amplifier XM-DS1300P5...

1 Answer

Problem with the right side of my subwoofer


Try flipping the speaker wire on the amp. ie. =Swap + and - ires

May 06, 2010 | Car Audio & Video

1 Answer

P3001 problem


if amp is mounted to back of the box try and move to in front of box near subs or port. the air movement of the sub will help keep the amp cooled. or you can orer some 12v cooling fans and take back plate of the amp and cool it that way. or you can buy higher quality audio, your choice

Feb 20, 2010 | Rockford Fosgate P3001 Car Audio Amplifier

1 Answer

Ok my sub woofer isnt working, the front and back speakers are working, the sub used to work then it would cut in and out then i tap the box and it works but no it doesnt work at all, i am not sure if the...


bad connection. try hooking up a different test speaker to your amp. if it works you can trace the short into your sub. if not the terminals in your amp may need to be re-soldered.

Oct 10, 2009 | JBL GT150 Car Subwoofer

1 Answer

Is my amplifier giving my subs the full power they need?


no sony has like 400 rms on that amp. eventualy u will blow the subbs. buy the hifonics 1608d amp to power thees subbs connect them all positives together at amp terminal and all negative together at negitive on amp terminal. this will make it a 1 ohm load with around 1400 true rms so around 500rms each sub.this amp on ebay runns like 250 and is worth every penny

Jul 20, 2009 | Alpine CDA-9884 Car CD/ MP3 Player

2 Answers

I think my subwoofers broken


the coils in the speaker are more than likely shot

Jun 17, 2009 | Sony XS-L121P5 Car Subwoofer

1 Answer

Vbx12a blows fuses when you power it up!


Make sure your gain is turned all the way down. Unplug the RCA cables before hand. What does the subwoofer do when the amp powers on?

Feb 08, 2009 | Visonik VB-10PKG Car Audio Amplifier

Not finding what you are looking for?
Visonik V15S4 Car Subwoofer Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Visonik Car Audio & Video Experts

Tygh Duval
Tygh Duval

Level 2 Expert

300 Answers

Joe Alexander
Joe Alexander

Level 2 Expert

65 Answers

Jerry Umali

Level 3 Expert

979 Answers

Are you a Visonik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...