Question about Actiontec GT704WG Wireless Router (gs583ad3-01)

1 Answer

I have a actiontec gt704 which verizion gave me I just swithed to at&t how do I reconfigure my router to work?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Reset the actiontec by holding the reset button (on the back) down until the power button glows orange. Let it go before the button turns green. Then open browser to 192.168.1.1 go to quick setup and enter user ID: admin - and password: password. This gets you into the modem configuration page. Next go to the advanced setup and enter WAN address settings. Make sure PPPoE is marked. The user name is attreg@att.net -and the password is attreg. Select Dynamic IP-DHCP and Dynamic DNS addresses. Aat the bottom of the page click apply.Go to the home page(listed on left menu) and connect to internet. You should be redirected to ATT page for registration. Good luck!!!

Posted on Oct 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will the verizon gt704 w6 work with at&t service? how do I reconfigure it to do this?


Theoretically yes. It would be under the advanced settings- you would have to change the VC configuration to the settings that AT&T run on. However, I am not familiar with AT&T's policies concerning third party modems. As for Verizon, I know they only provide passive support- and do NOT send out technicians for signal trouble if you are using a non-supported modem. I suspect AT&T is the same way.

Oct 06, 2010 | Actiontec GT704WG Wireless Router...

1 Answer

Lost my security key for my Actiontec GT704-WR router and I can't get a response from Actiontec... any ideas?


if it is a wireless router and you have it set up and you have a computer wired to it then all you have to do is log into the router and look for wireless settings and it will display there.

Dec 07, 2009 | Actiontec GT704WG Wireless Router...

1 Answer

CAN I USE THE ACTIONTEC GT704 FOR MY LAPTOP? its the dsl gateway. it doesnt have anything more than gt704.


yes you can use it to access internet on your laptop wireless as gt704 is a routed modem with wireless capability

Sep 28, 2009 | Actiontec (GT704WG) Router

1 Answer

Changing Wireless Channel on GT704-WG


David,

Log into your Router, navigate to the Wireless Setup page, and under Wireless Settings, you can enter the SSID and channel to broadcast.

The full manual can be located at the link below.

http://support.actiontec.com/doc_files/GT704-WG_NCS_User_Manual_3.0.1.0.6.0.pdf

Mar 05, 2009 | Actiontec GT704WG Wireless Router...

4 Answers

GT704-WG with Verizon firmware


I just flashed my verizon modem FT704-WG with the actiontec update upgrade301060gt704wg.img. I then selected "Obtain an IP Address through DHCP" and bam away we go... working better than verizons version.

Jan 21, 2008 | Actiontec GT704WG Wireless Router...

1 Answer

How to Configure Router


you can download the user manual from here as to post the full set up would take a while, if you do not have the drivers then click on the second link to download it has there is a set up wizard you can use. http://www.actiontec.com/support/broadband/gt704-wg.pdf http://www.actiontec.com/support/broadband/gt704-wg_driver_updates.html

Jun 30, 2007 | Actiontec GT704WG Wireless Router...

1 Answer

Port forwarding


its explaned in the manual - here on page 47 http://www.actiontec.com/support/broadband/gt704-wg.html which is probably simpler than repeating here - however, if you have trouble with the manual - post back a reply

Apr 07, 2007 | Actiontec GT704WG Wireless Router...

Not finding what you are looking for?
Actiontec GT704WG Wireless Router (gs583ad3-01) Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Actiontec Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you an Actiontec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...