Question about Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

ON MY DISPLAY

WHAT DOE A FLASHING E:91:01 MEAN

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Press Menu button
togle across from REC Mode to setup
togle down thrice from camera to setup 1
togle across into sub menu
togle down from four times to Initialize
togle across again to the sub-menu
togle up from cancel to OK
press center button to accept the OK choice
Screen changes and so press okay again
It should restart the camera
Opening on the 'Clock Set' screen
togle down to cancel and use the camera and make sure that you have the camera to flash, if it works try again in the Auto function.
If it is still not working do not worry follow the steps again two or three more times, As this is generally a software error message and not a hardware malfunction.
If it is working then don't forget to set your Clock.

Posted on Oct 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P1 code what does this mean


what does the user manual tell you .

Jan 17, 2015 | Digital Cameras

2 Answers

No power and cracked display is it related?


Dale, If your charger starts flashing very fast, or no light is coming on at all, something is wrong. No light coming on, could mean it does not get any power. But it also could mean the battery has died.
If you have a multi meter, you could test what voltage the battery has. Most batteries are 3,7 or 7,2 volt. when you use a multimeter, the reading in DC should be something like 3,9 or 7,5. On the meter the outage should be a few percent higher than what is printed on the battery. As soon as the meter indicates a voltage just a little (or worse a lot) under the printed value, the battery must be replaced.

Apr 25, 2014 | Nikon 1 J1 Digital Camera

1 Answer

Memory card is alwasy flashing in D90


This indicates a problem with the memory card.

It may mean the card is corrupted and will have to be replaced. It's also possible that you may be able to fix it by formatting it.

You can format the card either through the camera menu or by simultaneously pressing the little trash can icon button at the top left on the back of the camera and the metering button on the top right next to the off/on switch.

Both are marked with red and show "format" in tiny letters. Press both buttons for 2 seconds. A flashing "FOR" will appear in the display. When it stops flashing, the card is formatted.

If there's a problem with the card, there may be some sort of error indication. If the card can't be formatted, it is corrupt and needs to be replaced.

If you have pictures on the card, they will be lost when you format it.

You might want to try to download any pictures from the card to your computer before you format it, but if the card is corrupt you may not be able to do that.

Dec 22, 2012 | Nikon D90 Body Only Digital Camera

1 Answer

What does the flashing message "fEE" on the display of my D70s mean?


It means that you have a lens with an aperture ring connected and the aperture ring is not set at its smallest aperture.

Turn the aperture ring on the lens to its smallest setting (largest f/number) and lock it if the ring has a lock. Control the aperture from the body, just as you do with a lens without an aperture ring.

Nov 27, 2010 | Nikon D70s Digital Camera

2 Answers

Nikon d80 problem (err flashing with r09 in the lcd display)


I belive this isn't a fault but more to do with how you are using the camera. The r09 message is to do with the camera buffer and how many more pictures it can hold. You do have a memory card installed, right? The r09 is normally not an error, but simply an indicator of how many more pictures you can take in the current burst before the buffer fills. The number will vary according to the image quality and size settings.

Jan 17, 2010 | Nikon D80 Digital Camera

1 Answer

Memory stick does not work


The camera wants you to format the card in the camera. Go into the setup menu and scroll down to "format" and follow the on-screen instructions.

Aug 13, 2009 | Sony Cyber-Shot DSC-S500 Digital Camera

1 Answer

ON MY DISPLAY


Hi

This is normally a problem with the flash. Try resetting all the options to default through the menu... I think Sony calls it 'initialize' but I don't have a W35 on hand to walk through the steps sorry.

Hopefully this will work. If not, you will have to replace the flash, but you may still have to clear the error message after replacing the flash and that takes specialized equipment.

Good luck

Thomas

Oct 03, 2008 | Sony Cyber-shot DSC-W35 Digital Camera

Not finding what you are looking for?
Sony Cyber-shot  DSC-W55 Digital Camera Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Digital Cameras Experts

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

74 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Are you a Sony Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...