Question about Karcher 2500 PSI Pressure Washer

2 Answers

I have a troy build pressure washer model number 020337 Do I need to change the oil in the pump, and if yes how do I drain it and what kind of oil. I know how to change the engine oil

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

The pump requires no maintenance and no oil change. It is lubricated for life.

Posted on Oct 13, 2010

Testimonial: "Thanks for the help"

  • daomingsu69 May 30, 2011

    clay what if i spill out d oil?! can i use d ordinary engine oil??? and this is my unit k2.360 thnks!

  • NOT ME May 30, 2011

    No, you must use the special SAE 15W40 pressure washer pump oil. Do not use engine oil. It has a capacity of 100 ml or 3.38 ounces. Do not overfill. Here is one place you can get this very expensive oil. You may find it cheaper elsewhere.

    http://www.wmpcs.com/index.php?main_page...

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a troy bilt pressure washer model 020292 with a briggs engine, 2200 psi, the pump seal is leaking if i change it how do i check or change the pump oil

Posted on Jun 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change oil in Troy Bilt 020245 pressure washer pump


underneath base of motor look for a plug wuth a square slot,i normally use a 3/8" extension with ratchet.

Aug 20, 2013 | Troy-Bilt Troy - Bilt 020245 Pressure...

1 Answer

Briggs & stratton troy built


i find it easier to run it out of gas and tip it on its side and drain it from the dip stick tube uses sae 30 or 10w-30

Jun 08, 2012 | Garden

1 Answer

Honds 5 horse engine on a troy built power washer, need to add pump oil. how do I do this?


There should be a little wondow on the side of the pump body to show you the oil level and a oil filler cap on the top of the pump body . There should also be a drain on the bottom of the water pump this is not the engine its the water pump . It will take 10 -30 or 30 wieght oil check your manual or local dealer for your specific pump oil requirements . But if you use it often change it don't add and do the engine oil tothis is the biggest killer of pumps and engines and pumps nelgeliting oil changes also eighter drain all water from the pump or winterize in freezeing temputers

Sep 16, 2011 | Honda Garden

1 Answer

Troy bilt pressure washer will not build or reach high pressure


check the non-return valves in the pump block. if these are damaged or dirty you pressure will be greatly reduced. they are located behind the 3 lage brass hexagonal caps.

I hope this helps

Sep 04, 2009 | Karcher 2500 PSI Pressure Washer

3 Answers

How to change oil in a pressure washer


From the manual CleanShot 2050 Briggs and Stratton

Change Pump Oil
1. Drain engine oil and fuel from pressure washer
2. Use an 8 mm allen wrench to remove black pump oil cap between high pressure outlet and garden hose inlet.
3. Tiltl pressure washer to drain oil into an approved container until it drips slowly from pump.
4.Tilt pressure washer in opposite direction and empty premeasured pump oil bottle into same opening (a small funnel may be helpful) [THIS IS WHAT THE MANUAL SAYS-NOT CLEARLY WRITTEN IN MY OPINION OR WRITTEN BY SOMEONE FOR WHOM ENGLISH IS A SECOND LANGUAGE]
5. Install black pump oil cap and tighten firmly.
6. Set pressure washer in upright position. Add fuel and engine oil.

From the engine manual use synthetic 5w-30, 10w-30 from -20 degrees F to temperature of 100 degrees F.
Change oil after 5 hours of operation initially. Before tipping to drain oil, remove fuel from fuel tank by running until tank is empty. Remove oil cap and dipstick and tip engine. Keep spark plug side up. Or remove drain plug from the bottom of pressure washer with a ratchet and square extension and drain oil from bottom. (fuel does not have to be removed)

May 21, 2009 | Briggs & Stratton Pressure Washer...

3 Answers

Oil for a troy bilt 2550 psi pressure washer pump


What fluid and how much is required in the Troy-Bilt 2550 power washer pump?

May 17, 2009 | Briggs & Stratton Garden

Not finding what you are looking for?
Karcher 2500 PSI Pressure Washer Logo

1,830 people viewed this question

Ask a Question

Usually answered in minutes!

Top Karcher Garden Experts

John Trevino

Level 3 Expert

1388 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Karcher Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...