Question about Kenmore 46564 / 46565 / 465 / 6646569 Electric Kitchen Range

1 Answer

F5 code displays

When trying to set oven to come on, F5 flashes.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 367 Answers

First turn the breaker off to the oven and leave it of for about 10 minutes. This will reset the clock and if the erc (electronic range control) is still good it will reset and work. If it doesnt come back on replace the ERC. You can order the part from sears via model number.

Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 5f, what other solutions do you have


Good Morning stanley m, thanks for your inquiry!
Based off the information you have provided your Electrolux range is displaying an "F5" error code. Typically, "F5" stands for runaway temperature (overheating). This could be an issue with your RTD (Resistance Temperature Detector) or the EOC (Electronic Oven Control). I see you stated that you turned your range off and on I would suggest performing a reset on your oven and you can do that by disconnecting from your oven for roughly ten minutes. If you continue to have issues with the "F5" error code I would recommend having a professional technician out to your home for proper diagnosis and replacement of any electrical components. Hopefully this information has been helpful. -Matt

Jan 28, 2015 | Electrolux EW30ES65GW 30" Slide-in...

Tip

Troubleshooting KitchenAid oven, range and microwave error codes


Here list of Kitchen Aid range and oven codes.
4 Digit Failure Codes
F1 - E0 EEPROM communication error
F1 - E1 EEPROM checksum error
F1 - E2 UL A/D error
F1 - E4 Model ID error
F1 - E5 Calibration shifted
F1 - E6 Latch signal mismatch error
F1 - E9 Stack overflow
F1 - E3 Wiring harness cavity size does not match stored value
F2 - E0 Shorted touch pad
F2 - E1 Keypad cable connection error
F2 - E5 Cancel key drive line open
F2 - E6 Cancel key drive line open
F3 - E0 Oven temperature sensor (RTD) opened (upper oven on double oven models)
F3 - E1 Oven temperature sensor (RTD) shorted (upper oven on double oven models)
F3 - E2 Oven temperature is too high (Cook mode)
F3 - E3 Oven temperature is too high (Clean mode)
F3 - E4 Oven temperature sensor (RTD) opened (lower oven on double oven models)
F3 - E5 Oven temperature sensor (RTD) shorted (lower oven on double oven models)
F3 - E6 Drawer sensor open
F3 - E7 Warming drawer sensor shorted
F4 - E1 Meat probe malfunction - shorted
F5 - E0 Door Switch
F5 - E1 Self clean latch will not lock
F5 - E2 Latch during CLEAN error
F5 - E5 Self clean temperature not reached within 45 minutes.
F5 - E6 Door is open, but latch is locked
F5 - E7 Self clean latch will not unlock
F6 - E0 Return line not connected
F7 - E1 Common switch wire defective
Two digit codes:
F0 ERC Board failure
F1 ERC Board failure
F2 Oven temperature is too high
F3 Oven temperature sensor open
F4 Oven temperature sensor shorted
F5 ERC Board failure
F7 Function key stuck on ERC
F8 ERC Board failure
F9 Oven door lock failure
Microwave and Microwave combo error codes:
F1 - E3 or F1 - E4 Electronic control malfunction
F2 - E0 or F2 - E1 Keypad connection error
F2 - E3 Keypad held down too long, or keypad is shorted.
If you get an error code, try first resetting the code:
1. Disconnect power for about two minutes.
2. Connect back power.
3. If code re-appears, test and eventually replace faulty part.

on Apr 24, 2015 | Kitchen Ranges

2 Answers

Kenmore model 790.96113403 F5 error code


it means that your oven is showing a restart code

Jun 13, 2012 | Kenmore 99123 Electric Kitchen Range

1 Answer

What does F 5 mean when I try to turn on the oven


For F5 code on Electrolux slide in electric range, cycle circuit breaker and depress the "+" and the "-" on the # panel together for 5 seconds. This should reset the range.

Mar 12, 2012 | Kitchen Ranges

1 Answer

Whirlpool oven question...FSEO on display after about 5 mins of oven operation..beeps continuously,oven shuts off...dinner ruined!


If you receive error codes F5-E0, F5-E1 or F5-E2, the door and latch switch need checking and possible replacement.

The door switch is #12 in the diagram (click image for zoom)...

zjlimited_449.gif

Hope this helps.

Jun 22, 2011 | Whirlpool RF364 Electric Kitchen Range

1 Answer

After cleaning, the oven will not work, it keeps flashing F5, whats the problem?


Hello & Welcome to FixYa

Error code F5 is a door latch failure and is displayed due to malfunction of door latch-switch assembly. First try to check the door latch switch, if fine then recommended repair is replacement of door latch-switch mechanism. Please get back to me if you have any other questions.

Kevin

Jan 01, 2011 | KitchenAid KESC300 Electric Kitchen Range

2 Answers

Whirlpool Electric range model RF386


cant nfind euf5 code can find eo f5 its a door loc code saing the door and latch switches do not agree try pushing stop/cancel and try again also does the oven light go off and on when you open and close the door

Dec 31, 2007 | Whirlpool RF364 Electric Kitchen Range

2 Answers

Problem codes for self-cleaning ranges


My experience (Kenmore Ultra-bake Model 665-72002102) was that E1 F5 meant an error with the oven lock switch. In our case, the latch was partly stuck from food or other debris. Just moving the latch back and forth loosened the scale that was making it stick, and it worked again.

Dec 05, 2007 | Kitchen Ranges

1 Answer

Roper gas range Model# FGS337GQ


Here are the codes for you range:

F0 - E0 Analog to Digital Failure Disconnect for 30 seconds - if display re-appears - replace control F1 - E1 Safety flip flop Replace Electronic Range Control/Clock (ERC) F2 - E0 Shorted keypad Replace Electronic Range Control/Clock (ERC) F3 - E0 Oven temperature sensor or oven temperature sensor fuse opened Replace oven temperature sensor or fuse F3 - E1 Oven temperature sensor shorted Replace oven temperature sensor F3 - E2 Oven too hot Replace oven temperature sensor F3 - E3 Clean temp too hot Replace oven temperature sensor F5 - E0
F5 - E1 and E2 Door latch problem Check door/latch switch, replace if necessary

Looks like yours is a bad oven control. There is a # at the end of your model # 0-5 that will determine which control it takes. Once you have that # you can look it up at http://www3.sears.com/ Looks like the part costs about $165.

Nov 04, 2007 | Kitchen Ranges

Not finding what you are looking for?
Kenmore 46564 / 46565 / 465 / 6646569 Electric Kitchen Range Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Mike Carew

Level 3 Expert

958 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...