Question about KitchenAid K45SS Classic Stand Mixer

2 Answers

Kitchenaid mixer it wont start

Posted by on

  • 1 more comment 
  • Anonymous Jun 10, 2008

    THE MIXER RUNS ! SECOND THEN STOPS?

  • rlduke Jul 01, 2008

    Mixer runs about 10 seconds and stops. Will start again, but will run for only a few seconds before stopping again. Unit is 2 years old and used only one time previously.

  • marly328 Sep 05, 2008

    mixer will not start at all

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Kitchen Aid Mixer K45SS. I do not have a manual. What must I do to turn it on? I have moved the lever that said Off to another position and the lock lever is Locked. Please help !

Sincerely,
B. Phipps

Posted on Nov 26, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try replacing the moter brushes,if not its probably ether wiring or in the switch board.

Posted on Jun 05, 2008

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

SOURCE: KitchenAid Artisan KSM150BOB Stand Mixer won't start

It could be very easy. It maybe you have a the brush in the wrong way round or they have simply run out. They are on the sides under the black plastic caps. Although they will fit in the hole any one of 4 ways round, there is a key on one corner which means it will only go in one direction. Use a torch to look into the hole before you put it back in.
They shoud look like this : brush

Posted on Jan 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kitchen Aid 6 Qt. mixer wont start


A switch or interlock may be defective.

Dec 05, 2016 | Food Mixers

1 Answer

I have a hl200 mixer that wont start. What do I check


The power supply, like mains, plug and cable. then the on of switch or button. To check the motor, you have to open it, but I think you better leave that to a tech.

Jan 23, 2015 | Food Mixers

1 Answer

Mixer wont start


Check for broken wire under back cover. Check operation of switch contacts on black speed control plate. Check carbon brushed under black screw caps on the sides. The brushes are keyed, they only work one way.

Jan 08, 2014 | KitchenAid KSM150PS Artisan Series Stand...

1 Answer

It wont start


Check the carbon brushes under those black screw caps on the side. If not that then look for broken wire under back cover.

Dec 14, 2013 | KitchenAid KSM150PSOB Mixer

1 Answer

Kenwood prospero wont start


There are interlock switches on that unit so that it wont come on with out the attachments. One of them is bad or loose

Dec 02, 2013 | Kenwood Prospero Compact Km265 4.3 Litre...

1 Answer

KITCHENAid rrk5a wont start


Check the carbon brushes first, they only go in one way so be awake. Next check the wires connecting to the speed control plate under the rear cover,

Nov 04, 2013 | KitchenAid Food Mixers

1 Answer

Mixer wont start


Are you still having an issue with your HOBART N50. Let me know and I can walk you through it.

Oct 21, 2013 | Hobart N50 Stand Mixer

1 Answer

I have a kitchenaid stand mixer which kept slowing down and finally wont start at all.i replaced the bushes but still it wont start help!


Hi CHESTERMALPA, I hate it when that happens. It seems that power is not getting to the armature from the brushes so I would suspect that one or both of the brushes is (are) not seated properly. I'd suggest removing them again and making sure the contacts are facing in the right direction to contact the armature’s commutator. The concave contact face should be resting completely on the commutator. If you've turned it 90 degrees too much, it won’t' seat properly and the motor doesn’t get any juice.
Good luck, I hope this helps. Howard, Burke, VA\
If this solution has been helpful, please rate it, thanks! - hslincoln

Dec 05, 2009 | Food Mixers

1 Answer

Hobart 20qt just will hum motor wont take off .


Motor start capacitor failed or start run switch mounted at back of motor housing damaged

Nov 12, 2009 | Hobart HL200C Mixer

1 Answer

Hobart a200 wont turn untill i turn doe hook then will rotate is this a motor problem?


Sound's to me like the start switch in the motor is bad or sticking.Does the motor hum?

Apr 21, 2009 | Hobart A200 Stand Mixer

Not finding what you are looking for?
KitchenAid K45SS Classic Stand Mixer Logo

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

jack arons

Level 2 Expert

44 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...