Question about Audio Players & Recorders

1 Answer

Marantz PMD 350 CD player/Cassette deck

This is discontinued Marantz combination CD player/Cassette deck. The CD tray gets stuck in the open positon. If pressure is put on the right side of the tray when the close button is pushed--it will close. Without taking this action the tray will jam and not move. Do you have any suggestion besides taking it into a repair tech?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Well if you want to DIY you should open the coves, spay some oil on the mechanics and ensure they are running smoothly, if you spray grease on lens you will damage it, be careful.

Posted on Jun 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Marantz CD Player PMD325. Cd tray won't open. Sounds like it's trying to but no motion. I have lid off but can't see what's trying to move when I push the open button.


The cd mech has to drop before the tray will open, if the belt under the front is broke you can turn the pulley wheel by hand and all will unload

Aug 22, 2014 | Audio Players & Recorders

1 Answer

We have Marantz PMD 325 CD players. Usually TOC REading comes up when you put a CD into the player. However sometimes we now get the following message "PMA Reading", What does this mean.


Hi Wendy CD-Rs and CD-RWs have a component that ordinary music CDs do not have -- an ...This additional track space includes the power memory area (PMA) and the ... which tells the CD player what part of the disc it is reading at any particular time. ...uncorrected error on a music CD only means a bit of fuzz or a skipping noise. GOOD LUCK !

Jan 05, 2014 | Marantz SA8260 CD Player

1 Answer

CD-72 Marantz CD Player disc tray is stuck in the shut position.


You might have to open the player and see why. remember to unplug till you need to see if you can get it to work or not.

Sep 06, 2012 | Audio Players & Recorders

2 Answers

Cd tray won't stay open--when you press the "open" button, it opens but then closes again immediately.


It has a misaligned loading mechanism. I have dealt with this kind of problem before. What is happening is that before the tray have a chance to open all the way it gets stuck and gets pulled back in.

May 24, 2011 | Marantz CD5001 CD Player

1 Answer

Hi, My young daughter held the tray on my new cd5001 player as it was opening. The tray now opens and closes continually while the unit is turned on. It will not play discs and the words open & close...


while your daughter was "holding" the tray did you hear any "popping" type noise?
This is a typical sympton when the gears have skipped a few teeth!
Your best bet(IF your a "handy" person) would be to take the unit apart to get to the CD drive, and CAREFULLY push/pull on the tray to manually "open/close" it, and watch the tray in correlation to the "eye" mechanism, to see if it is aligning with the "hole" in the tray correctly!
Good luck!

Jan 22, 2011 | Marantz CD5001 CD Player

1 Answer

CD player has never worked Does not recognize


try cleaning the lens, if still dooest work try to adjust a tiny trimmer resistor in the board near the lens

May 05, 2010 | Marantz PMD-351 Combination CD Player /...

1 Answer

Can't eject cd so how can i get it out of my marantz cd-6000 cd player


take the lid off and manually push out the tray.
alot of marantz and philips allow for this rather than fiddle with hard to reach cogs like on other players.

hope this helps.

Nov 30, 2009 | Marantz CD-6000 CD Player

1 Answer

DR6000 display "open"


you may need to replace the whole mechanism as i've had quite a few philips and marantz cd recorders with the same mechanism with exactly the same problem. when you press open/close it will display open or close with no sign of life from the player. this turned out to be a faulty laser unit and the PCB which is underneath the mechanism seems to go the same way which i found out later when i replaced the laser unit. the recorder worked for around 5 minutes then the laser started moving erratically but then would work again for 5 minutes after switching it off & on again. i cured the fault by replacing the PCB aswell. hope this helps?

Aug 24, 2009 | Marantz DR-6000 CD Player

1 Answer

CD Tray on one side doesn't open.


I have also had the sticking CD Tray problem with my Stanton. I disconnected the until and unplugged the separate read out control panel. I was going to strip it down, but when I plugged the power supply on it worked fine again!!!!. I wwill reconnect and see what happens!!

Dec 14, 2007 | Stanton C.501 Dual MP3 CD Player

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98694 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69654 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...