Question about Sony KV-27S65 27" TV

1 Answer

Panasonic color tv model ct-13r38sg 13"

I have audio but the on horzi only a line going horzi

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 318 Answers

Verticle amplifier is not working on your tv
take it to a shop if you dont know.
verticle IC BE CHECKED.
AND ELETROLITIC CAPACITOR feeding verticle scan coil.

Posted on Apr 16, 2009

1 Suggested Answer

  • 4234 Answers

SOURCE: panasonic color tv model # ct-13r38sg

The problem here is that the vertical IC either has bad connections or is defective. Look for a small flat IC with about 11 pins attached to a heat sink. It will be marked LA7837 or something similar. Try resoldering the pins on the IC first. If that fails to resolve the problem replace the IC.
Keep us posted.
Dan

Posted on Jun 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic CT-36G34 TV vertical deflection circuit


there is a single ic you need to find, usually location ic301 or 401---it will have between 7 and 13 pins in a single straight row---a generic number is printed on the front---usually begins with a LA but can be different

Locate the chip and gain access to the bottom of the board, the pins on the chip break loose from heat==SOLDER ALL THE PINS BACK AND YOU SHOULD BE GOOD TO GO---its a very common problem in these sets.
12_19_2012_7_41_26_pm.jpgsomething like this with more pins possible--will be attached to metal of some sort to keep it cool.

Dec 19, 2012 | Panasonic CT-36G34 36" TV

1 Answer

Panasonic CT 27 SL - 13 GL how to connect external speakers


This TV is set up to connect to an external amplifier which that controls the speakers. It has an analog audio output which means you need an RCA audio cable (2 RCA plugs (red and white) on each end. You can't directly connect a set of speakers. The audio output jacks at between the antenna in and the video inputs. Then you need to enter the menu and enter the Audio submenu. Go to the Speakers item. Turn the TV speakers to off and fixed audio out.(The amplifier will adjust the volume.) Use the Up/Down arrows to navigate through the menu options, press enter to enter a sub-menu and the volume up button to change a setting.

There is also a headphone jack which may be compatible with computer speakers. That has a 3.5 mm jack. To use headphones, set the Speakers Audio item to TV speakers Off and variable audio out. (The TV controls will adjust the volume.)


To use a Universal remote to set the audio or modify the channel list, you need one that matches the Menu function of the original remote. You may need to try multiple codes for Panasonic TVs to get the button to work. Some low-end universal remotes may not have the menu button; get a different remote or use the menu button on the front panel of the TV.

To set the channel list, press Menu and select Setup. Go to the Prog Chan option. Then set your Mode in the first option (Cable or Air). Then choose Auto Program to scan all channels or Manual Program to edit the channel list.

The manual for the TV is available at retrevo: http://www.retrevo.com/support/Panasonic-CT-27SL13-TVs-manual/id/275ag210/t/2/ . You will need to enter a code to access the manual. See page 5 of the manual for the input connections (page 7 of the PDF).

Cindy Wells

Sep 13, 2012 | Panasonic Standard (CRT) Televisions

1 Answer

I have a old tv 36 inch panasonic ct-36d30 my tv


sound like yoke short problem. replace same yoke as possible . good luck!

Feb 15, 2010 | Panasonic CT-36D32 36" TV

1 Answer

Panasonic CT-36SL14J White screen


my Panasonic CT-36SL145J won't turn on

Dec 25, 2008 | Panasonic CT-36HL43 36" TV

1 Answer

Panasonic color tv model # ct-13r38sg


The problem here is that the vertical IC either has bad connections or is defective. Look for a small flat IC with about 11 pins attached to a heat sink. It will be marked LA7837 or something similar. Try resoldering the pins on the IC first. If that fails to resolve the problem replace the IC.
Keep us posted.
Dan

Jun 02, 2008 | Sony KV-27S65 27" TV

1 Answer

CT-13R38SG


Parental Lock Feature

Combo's
With unit on and no cassette inside, hold the rec/time button on the front of unit for 7 seconds.
CTV's Lock Mode
Only the on/off button will work,the others have no effect. Press the action and power buttons at the same time on the front of the set for 10 seconds or so.

LCD TV's, Lock Mode
If customer forgot Parental Lock Code, unit must be re-initialized.
Press and hold the Volume down button on the front panel, press the OK button on the remote for 5 seconds.
Bill

Apr 01, 2008 | Panasonic CT-27E13 27" TV

1 Answer

Panasonic tv help


my tv screen just turned brown. sound and everything else works fine?????
Panosonic HD tv

Jan 24, 2008 | Sony KV-27S65 27" TV

1 Answer

Where is ny color


HI SIR PLEASE TRY TO CHECK THE COLOUR SYSTEM SETTING SELECT FOR AUTOMATIC OR THE PLACE COLOUR SYSTEM YOU LIVE IN FOR EXAMPLE (NTSC ) FOR USA

Jan 22, 2007 | Panasonic CT-2788YD 27" TV

1 Answer

Tv color


The solder joints on the degaussing thermistor have cracked or the thermistor itself has opened, and the CRT is heavily gaussed. You can degauss (demagnetize) the picture tube and the colors should return to normal, but the thermister should be resoldered or replaced.

Nov 26, 2006 | Panasonic CT-32SF35 32" TV

Not finding what you are looking for?
Sony KV-27S65 27" TV Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68250 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...