Question about Logitech Webcam

1 Answer

I have install the software for my logitech webcam and also connected the device yet It is telling me the device is not connected and I cannot get it to work

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Follow the instructions below and it will work.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera's have to be setup on the program they are to be used with. Just installing the
camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud

Posted on Oct 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Helo, i mis my logitech softwar ,m/n:v-u0012,pid:LZ939BN RATING:5V=500ml,i need sftwar how can get pl tel me


Visit http://www.logitech.com/en-gb/support-downloads/downloads?selectedcrid=435 online and allow the site to detect your webcam by selecting option 1. You will be able to download the driver and software from there.

Sep 25, 2010 | Logitech QuickCam Connect Webcam

2 Answers

How can i install m logitech webcam ? i have no cd installer as i lost it


Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to check the support software - Microsoft DirectX . This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11
To start the DirectX Diagnostic Tool, click 'Start', click 'Run', type dxdiag in the Open box, and then click OK
Run through the tabs checking the 'notes' windows for information

Procedure to re-install Logitech software
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Logitech
Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.
Connect your webcam when prompted.

Sep 03, 2010 | Logitech QuickCam Connect Webcam

3 Answers

I NEED A FREE SOFTWARE FOR MY LOGITECH WEB CAM C 120


Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to download Microsoft DirectX 9 or later to support your webcam

Procedure
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Logitech
Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.
Connect your webcam when prompted.

Aug 22, 2010 | Logitech Webcam

2 Answers

My webcam zoomed in for some reason how do I zoom out?


Connect your webcam
Launch the Logitech toolbar from your desktop shortcut or from 'All programs' > Logitech > Logitech webcam software (folder) > Logitech webcam software (webcam icon)
With the toolbar launched - click on the 'Quick Capture' menu ( 2 photo frames picture) and your webcam will start
With the webcam still running click on the 'Settings' menu (2 gear wheels)
Your zoom control will be easily seen and adjustable by ramping the slider up or down.

Apr 01, 2010 | Logitech QuickCam Pro 9000 Web Cam

2 Answers

When trying to use my logitech webcam it says its in another app


Uninstall the software. don't connect your webcam with pc. Re-install the software via disk then re connect the webcam. when it says your new software has been installed but will work only after restart just give a restart. your cam will work

Jun 14, 2009 | Logitech QuickCam Pro 9000 Web Cam

3 Answers

Lost my webcam installation cd


Here is logitech download page, select your model and download software. Install software with camera NOT connected to usb. Connect only when required by software or after installation.

Good luck

May 29, 2008 | Logitech QuickCam Pro 9000 Web Cam

2 Answers

Webcam installation software


If it isn't being shown on the main webcam download page, it is most likely on the legacy download page here:

http://www.logitech.com/index.cfm/405/&cl=us,en&legacy=1


Click on the cam that looks like yours (they made a few versions of the express), and then choose your operating system.

Be sure to unplug the cam BEFORE installing the software, and only plug it in once the on-screen instructions tell you to do so.

Apr 10, 2008 | Logitech QuickCam Pro 4000 Webcam

3 Answers

My webcam tells my viewer that im not connected, whats wrong?


In general, either the messenging software that you are using i.e. AIM, YM, MSN, etc is not yet configured to connect the webcam OR you may have software firewall blocking the ports used by the messenging software, OR a router may need to be configured to allow the port needed by the messenging software to pass unimpeded.
More information would be appreciated

Feb 19, 2008 | Logitech QuickCam Messenger Web Camera

2 Answers

Logitech QuickCam STX vista compatibility?


when you were installing the software did a taskbar pop up appear and tell you that hardware was found, and then proceeded to install the cam and inform you that the Logitech STX is now installed and ready for use? If not then the cam may need to be tried in another usb port as of yet it has not been recognised by windows. Also if this is being used on a laptop, sometimes there is not enough power amps being sent be the usb port to recognise, again trying a different port may solve that. If all else fails re install the software again, but make sure windows is allowing the cam to work, as sometimes there is an updater programme that works in conjunction with the cam to update drivers etc, this will probably be being dissalowed by either windows or your internet security programme and any part of the software that is being blocked may be stopping your cam also.

Jun 11, 2007 | Logitech QuickCam Communicate STX Personal...

1 Answer

Logitech QuickCam STX vista compatibility?


Have you updated DirectX?, I'm not sure if Vista has DX9.0 or 9.0c, but you could try and update DirectX before you install the cam software. Also if the cam is usb, did you install the software "before" connecting the cam?, some people aren't aware that usb devices have to have the software installed first, before connecting the device.

Jun 11, 2007 | Logitech QuickCam Communicate STX Personal...

Not finding what you are looking for?
Logitech Webcam Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2767 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...