Question about Simplex Kaba Ilco Unican L1000 keyless lock

1 Answer

I was relocating a working Kaba m# LL101126D41 i had happen to turn the outside handle with the small key cylinder removed on the back side top now when all installed it wont lock . what do ineed to do . i can put my key in the cylinder and turn it to left then it will look . What do i need to do Thanks Aaron Southern Surgical Hospital 985-661-2145

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 963 Answers

Customer service can be contacted from this link:

http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Tech Support from this link:
http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx

Posted on Nov 08, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My lock is not working. How can I remove the mechanism from the outside


The mechanism is not removable for the outside, for that would defeat the purpose of the lock if any would-be entrant could just do that!

I am including a link to the grid of information for the L1000 lock, where you can find PDF links to the Manual, Parts List, and Tips. Tips has reprogramming and troubleshooting information.

In order to view PDF files, you will need to have Adobe Reader installed on your computer. There is a link to get Adobe Reader on the Literature Grid Page:

http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13

I found this instruction elsewhere on the FIXYA site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVER TIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:Spanner Wrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Customer service can be contacted from this link:

http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Tech Support from this link:
http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx

Good luck!

May 23, 2011 | Simplex Kaba Ilco Unican L1000 keyless...

1 Answer

Need to find instructions to change combination on Kaba L 1000 keyless lock.


I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS. REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59 CONTROL KEY (DO NOT OVERTIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the Simplex mechanical pushbutton locks:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13

Good Luck!

Feb 24, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

I have a Simplex Kaba Ilco Unican 1000 keyless lock and I want to change its password. But I don't know how to do it. Could you please help me. Thanks.


I believe you can find this to be relevant:
I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS. REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59 CONTROL KEY (DO NOT OVERTIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the Simplex mechanical pushbutton locks:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13

Here's the website to continue your search:
http://www.kaba-ilco.com/access_control/products/eplex.aspx?id=6

Good luck!

Good Luck!

Feb 14, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

We have a Simplex LL101126D41 Combination lock and tried to change the code following the instructions for an earlier model (on that does not have the handle). Now the lock will not recognize the new nor...


I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVERTIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from

this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the
Simplex mechanical pushbutton locks:

http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.
aspx?id=13

Good Luck!

Feb 11, 2011 | Simplex Kaba Ilco Unican L1000 keyless...

1 Answer

Lost code for 5 number lock


I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS. REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59 CONTROL KEY (DO NOT OVERTIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the Simplex mechanical pushbutton locks:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13

Good Luck!

Jan 26, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

Need a instruction manual for programing of KABA lock. Model No. E-760 K


I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS. REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59 CONTROL KEY (DO NOT OVERTIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the Simplex mechanical pushbutton locks:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13

Good Luck!

Dec 22, 2010 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

How do I change the code on the Kaba IIco Unican 1011 keyless lock?


I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVERTIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:

http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the
Simplex mechanical pushbutton locks:

http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.
aspx?id=13

Customer service can be contacted from this link:

http://www.kwikset.com/Customer-Support/Contact-Us.aspx

Good Luck!

Dec 21, 2010 | Simplex Kaba Ilco Unican 1011 keyless...

1 Answer

Need to know how to reprogram the code on a Simplex Kaba IIco Unican 1000 keyless lock


I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVERTIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the
Simplex mechanical pushbutton locks:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.
aspx?id=13

Customer service can be contacted from this link:

http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Good Luck!

Dec 05, 2010 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

How do you reset the combination?


I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVERTIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from

this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the

Simplex mechanical pushbutton locks:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.
aspx?id=13

Good Luck!

Nov 29, 2010 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

Reset combation without a combation kaba


I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVERTIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

You will find a link to download the manual for your model on this page:

http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13

These are PDF files, requiring Adobe Reader to open. There is a link on the same page to download Adobe reader.

Customer service can be contacted from this link:
http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Tech Support from this link:
http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx

Good luck!

Sep 29, 2010 | Simplex Kaba Ilco Unican 1011 keyless...

Not finding what you are looking for?
Simplex Kaba Ilco Unican  L1000 keyless lock  Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Simplex Locks & Locksmithing Experts

Brad Brown

Level 3 Expert

15973 Answers

Michelle Balcom

Level 2 Expert

87 Answers

Pamela Leach
Pamela Leach

Level 3 Expert

1830 Answers

Are you a Simplex Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...