Question about Motorola Talkabout T6500 (7 Channels) 2-Way Radio

1 Answer

I have held the - sign and done this several time and the Roger beep is still sounding what next?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Motorola Master
  • 1,646 Answers

The T6500 is slightly different than many of the other TalkAbout radios where the + (plus) button turns the Roger Beep (aka talk confirmation tone) on or off.

T6500 will turn ON the Roger Beep when turning the radio on with the +, but to shut it OFF you must hold in the - (minus) button while turning the radio on.

Here is a link to the user guide: http://www.giantintl.com/ContentManage/manuals/Moto/T65xx.pdf You will find the instructions in detail on page 25.

Best regards.

Posted on Oct 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I turn off the beep on the cxt195?


You mean the "roger beep"? You can try the steps below from this site>>http://science.opposingviews.com/turn-roger-beep-off-motorola-walkie-talkie-10001.html
Step 1
Turn the Motorola Talkabout two-way radio on by pressing the "Power" button.
Step 2
Hold down the "Menu" button for several seconds until an icon appears on the screen. "On/Off" begins to flash on the screen.
Step 3
Press the "Minus" button to turn the "Roger" beep off. If you want to turn it back on, press the "Plus" button.
Step 4
Tap the "PTT" button to save the change. You may also press "Menu" to save the change and completely exit Menu mode

Hope it helps...

Dec 03, 2014 | Radio Communications

1 Answer

My roger beep will not work


Can you specify what model/make transceiver you have. Most exports transceivers have the roger beep function next to the TX/RX switch near the mic connections and microphone audio amp.

Sep 27, 2014 | Radio Communications

1 Answer

Why does my Frigidaire (Gallery Series) stove always beep all by itself ? It starts whenever it feels like it and hardly stops !


Hi Roger Uson, thanks for the inquiry!

It sounds like it could be an issue within your control panel or sensor of your Frigidaire range and that is why it beeps. I would recommend having a professional come out to properly diagnose your appliance. I hope this is helpful. -Matt

Sep 23, 2014 | Kitchen Ranges

1 Answer

To turn the tlk confirmation tone off... it does not work holding the - sign and turning it on now what?


Just read your message a second time. Is the sound following the release of the PTT button? If so, it is indeed the Roger Beep (aka talk confirmation tone). If holding in the minus button while turning the radio on does not turn it off, there might be something wrong with the radio, such as a one of the other buttons being slighty stuck. Or you have your keypad locked. To unlock the keypad hold the menu button in for 3 seconds until the lock icon disappears.

Another thing which will make a noise during or after transmitting is the low battery beep. You might check your batteries. Old, bad, poorly charged or defective batteries can cause this.

fyi: Some users might think the Call Tones are the Roger Beep.

Lastly, there is a PTT Timeout beep which will occur if you hold the PTT in for more than 60 sec while talking.

Hope one of these items is of help to you.

http://www.giantintl.com/ContentManage/manuals/Moto/T65xx.pdf

Best regards.

Oct 13, 2010 | Motorola Talkabout T6500 (7 Channels)...

1 Answer

Seems "desynchronized," beeping constantly, doesn't seem to work anymore


Reset the unit, (page 21 in the manual.) If you are missing the manual... Put the receiver next to the transmitter. Turn the receiver off then on again While holding the volume button on the receiver hold down the pager button on the transmitter. Do this until it beeps
That's what the manual said, I had to try it several times before it worked. I'm not exactly sure what I did the last time (maybe held it down longer or pushed it repeatedly), but it made a different beeping sound than the first times and suddenly it started working again.

Dec 08, 2009 | Fisher Price Ready 2 Wear Monitor

1 Answer

No roger beep does the freq counter have anything to do with it?


the roger beep circuit is next to mic connector and tx/rx cirucuit. the freq counterDISPLAY is on seperate circuit.

Sep 29, 2009 | Galaxy Radios DX- 88HL Base CB Radio

1 Answer

How do you go to silent mode?


There are two different kinds of beeps you can control, the "roger" beep and the "button" beeps. Below is an excerpt from the owners manual explaining the simple procedure.

“Roger” Beeps/Talk Confirmation Tone
When you turn this feature On, your two-way radio transmits a unique tone when
you finish transmitting. It’s like saying “Roger” or “Over” and lets others know
you have finished talking. If the person you are talking to does not hear the talk
confirmation tone, you can enable it by pressing and holding + (plus) as you turn On
your radio. Now, whenever you release the PTT, you let your friends know you have
finished talking by transmitting a “Roger” Beep tone. “Roger” Beeps will be
disabled as the Default Setting.
Note: To toggle the Talk Confirmation Tone feature, turn your radio Off and then
back On while pressing and holding + (plus) .

Button Beeps
Every time you press a button on the front of your radio, it beeps unless you turn
Button Beeps Off. To turn Button Beeps Off, turn your radio On while you press - (minus) and
hold . To turn Button Beeps back On, turn the radio Off and then back On again
while you press and hold the - (minus) . On is the Default setting.

Here is a link to the manual: http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T7100_User_Manual_E.pdf
17

Nov 28, 2008 | Motorola T7100 2-Way Radio

1 Answer

Turning off roger beep


Press and hold the plus (+) button while turning on the radio.

You can find the instructions on page 24 of the user manual: http://www.giantintl.com/RadioPDFs/manuals/T6500.pdf

Nov 20, 2008 | Motorola Talkabout T6550 (7 Channels)...

Not finding what you are looking for?
Motorola Talkabout T6500 (7 Channels) 2-Way Radio Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1646 Answers

OBHighflyer

Level 2 Expert

125 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...