Question about Samsung LN-S4051D 40 in. LCD Television

1 Answer

Hit power......click.....wait ten to twenty minutes for picture, thought Samsung was a GOOD product?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

Look for bad caps with leaking/bulging tops first in the power supply module. http://www.shopjimmy.com/catalogsearch/result/?q=Samsung+LN-S4051D


If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.

Posted on Oct 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SOMETIMES THE MACHINE DO NOT RINSE OR SPIN? I EXPECT THAT THERE IS SOMETHING WRONG WITH THE SETTINGS?


I am seeing alot of these questions regarding samsung washers they are usually very good I am thinking there is too much weight in your washer, are you filling the washer too full, they can only handle so much weight before they just throw themselves into error codes. So if its clicking hit the power button does it drain the water, i am asking to see if the pump is working, if it drains , when its done unplug the unit wait ten minutes and plug it back in and turn power on, dont hit any other buttons what does it do?

May 02, 2016 | Samsung SW62ASP Top Load Washer

1 Answer

Why doesn't it turn on?


Probably the failing power supply finally failed completely.

Mar 07, 2016 | Samsung Pn64d8000 64-inch 1080p 600hz 3d...

1 Answer

Accidentally hit clean button on a Frigidaire Gallery Oven. Hit Cancel button. Oven door won't open.


I appreciate your post, C Maury!
From my understanding your hit the clean button on your Frigidaire wall oven and now the door will not open. I would hold down the cancel button for at least ten seconds, this should unlock the door. If that does not help I would recommend disconnecting power from your wall oven by flipping the household circuit breaker for ten minutes. I hope this information was helpful to some degree. -Matt

Nov 20, 2014 | Frigidaire 30 in. Electric Gallery Series...

1 Answer

Electrolux dishwasher in locked mode


Good Afternoon David - When the light is on, the control is locked and no cycles can be selected or started. To de-select the Control Lock, press and hold the heat dry key or press down on the lock icon for approximately twenty seconds. If issue persists, you may reset the dishwasher by either unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and turn the unit back on. The dishwasher should resume to normal operations.

Jun 24, 2013 | Electrolux Dishwashers

1 Answer

When powered on with remote,makes usual sound,green light comes on,then goes off,blinks 3 times,goes off and contiuesly blinks until unplugged. Problem is picture suddenly went black with no sound.Could it...


my samsung tv model number is sp50L7hx it's 6 years old, when I turn it on it's a not really nice picture just nice sound, after 2 hours the picture is off just sound .... after I was switch off TV and switch on again ... the picture is very bad and just for a ten-twenty minutes ... what's is the problem? I'm never change the lump ... or is it a some problem with T-Con decoders board or is it a lump?

Jun 19, 2011 | Televison & Video

1 Answer

My Sony KDS-60A2000 is 41/2 years old. About 2 weeks ago I could not get the tv to power up. the green stand by light just kept blinking. I powered off, then powered up again and the tv started and and...


Hi,
TV needs lamp replacement as existing lamp got weak or has been reached to end of its working life, please note that lamp is not dead or broken so that is why lamp lit is not lit at tv front.
Hope these info will help you.
Thanks.

Nov 03, 2010 | Sony KDS-60A2000 60" HDTV

1 Answer

Replaced the DLP bulb and the picture only worked for ten minutes


Hi,again,Thanks for the blessings.One quick way that works for most sets its to unplug the set wait 5 min and plug it back again.Here's instructions to replace the ballast: http://guides.fixyourdlp.com/samsung/bp47-00033a.php Found ballast here: http://www.discount-merchant.com/SAMSUNG-9137-008-08905-Lamp-Ballast-Driver-p/1139281.htm?Click=48173 Pay attention to other sounds like buzzing or whirling because it could also be the color wheel.God bless you and your house! Let me know if you need further help. r2d2repair@gmail.com

Nov 18, 2009 | Samsung HLP4663W 46" Rear Projection HDTV

2 Answers

After about ten minutes the picture goes blank but


It sounds like the main board may have went on the TV. It should be not that costly to replace

Sep 26, 2009 | Samsung LE40R74BDX 40 in. LCD Television

1 Answer

Can't receive text messages


How often do you power your phone on and off? you should do this every day.

May 16, 2009 | Samsung Rant Cell Phone

1 Answer

Key on my 2002 envoy want turn all the way back and come out ,why is this ?


I can not release the key from the ignition. I have replaced the PNP switch. If I wait ten to twenty minutes it will release it sometimes. I don't know what to do from here. Please Help!!!!

Jun 18, 2008 | 2002 GMC Envoy

Not finding what you are looking for?
Samsung LN-S4051D 40 in. LCD Television Logo

Related Topics:

968 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...