Question about Motorola Mobility RAZR V3i Cellular Phone

1 Answer

Flip top is real loose - Motorola Mobility RAZR V3i Cellular Phone

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

This became a common problem for most (all?) of the RAZR phones. A T6 bit can get you into the shell to determine if the hinge can be easily repaired. Chances are it cannot, unless you have another one sitting around to use for parts (ebay perhaps?). If you don't replace the phone, or repair the hinge soon, prepare for more issues in the future, most specifically a white/blanked out screen, as with the hinge issue, the cable that leads to your display half of the phone from the keypad half will come disconnected. Especially with a loose hinge. My recommendation if you are not inclined or prepared to do the repair yourself is just replace it.

Posted on Oct 13, 2010

Testimonial: "thanks you are so right..."


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I do a lot of hemming on my machine, the underneath stitch is real real loose, I tried adjusting stuff, still is so loose I have to cut it and begin again, thanks

Is your top thread not pulling the bobbin thread up? This would be top tension too loose. FYI--be sure to ALWAYS RAISE the presser foot when threading the upper thread so it will seat properly in the tension disks.

If the bobbin thread is loose, then the bobbin tension may need to be tightened.

Understanding Thread Tension Threads

Mar 06, 2017 | Sewing Machines

1 Answer

How hat do to adjust the tension on my Singer 3201 - the under thread is real loose

If the bottom stitches are messy it usually means the top thread isn't threaded correctly.

May 10, 2014 | Singer Sewing Machines

1 Answer

Sanyo flip phone screen going out

Typically with flip phones there is a wire connecting the screen to the board. This could just be loose. I don't know in your phone but in Razors this wire can just be popped back into place if you feel comfortable taking it apart. Easy to do through Youtube videos

Mar 29, 2014 | Sanyo r Sanyo Mirro SCP-3810

1 Answer

When driving down the road at any speed, occasionally I hear a noise that sounds like something is loose or spinning coming from front driver side wheel, I flip it into 4wd and it stops. What's going on?

This sounds like the front hubs are trying to engage. This motor/4wd is real susceptable with vacuum problems. I let my oil get real dirty and it caused the low vac.The dealer performs vac test for front IWES (3c247) and found both of them leaking out of tolerance. This also caused damage on the splined contact points so they had to replace both front wheel hubs (1104)

Feb 02, 2010 | 2006 Ford F-150

1 Answer

The top screen s really loose and flips back anf fourth

Try buying a tri screwdriver on ebay and using this guide: then take it apart and use some glue.

Apr 17, 2009 | Nintendo DS Lite Console

1 Answer

The top flip part of my V3 is loose, How do I make it tight?

You may be able to if you are repair savy but check around where you live I live in ATL and I can get a whole new house put on a Razr at 3 locals shops for $15-$20.

Jan 08, 2009 | Motorola Mobility RAZR V3

1 Answer

Loose top

my phone was doing the same thing, so i sent it in and they tightend the top pice

Oct 17, 2008 | Samsung SCH-U470 Juke Cellular Phone

1 Answer

Motorola V3 - Loose top flip

the phone need to be open and fixed

Feb 11, 2008 | Motorola Mobility RAZR V3

1 Answer


If it is an SLR, there is a recessed button on the bottom of the camera that you push, then you flip the little handle out of the supply rear on top and crank clockwise, after the film is rewound and the real spins real easy, lift the supply real with the little handle and the back will pop open.

Feb 05, 2008 | Photography

Not finding what you are looking for?
Motorola Mobility RAZR V3i Cellular Phone Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

Rami Obeid

Level 1 Expert

16 Answers

D. E. Hev

Level 3 Expert

1173 Answers

Lawrence Oravetz

Level 3 Expert

9742 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides