PS3 Displays Pink Pictue

The DLP chip is failing. If it is still under warranty, contact the warranty section on Sanyo's web page.

Its highly likely a cable issue. You know which cable connection is wrong if are using component in and out. But change to a new connection cable whatever it is and I think it will be solved

Check your monitor cable first! Try reconnecting your display cable both at the computer and monitor ends. If it's still pink, try reinstalling the vga graphics driver from the Dell Utility CD-ROM (Or download from Dell's support site http://www.dell.com/support/home/us/en/19/product-support/product/dimension-3100/drivers then select you PC model's video driver and re-install it. if after re-installing the video driver your display's still pink, try connecting to a different monitor - if a different monitor displays correctly, then its your monitor that's faulty. If it's pink on a different monitor too, then it's your PC video hardware that's got the problem - At least you'll know whether it's the monitor that's faulty or whether it's your computer's graphics hardware. (if your computer's video chip is faulty, then I suspect you'll need a replacement motherboard - $$$ - as I think the video is "on-chip" on the Dimension 3100 - so it may be time to consign it to the scrapheap and buy a new system if you can afford to)

I have the same problem. I have an LG lcd tv as well. I have my cable box connected to via hdmi into the reciever then from reciever to the tv via another hdmi cable. I can watch tv and like the problem above see the pink dots on boot-up but I can't get the home screen to display.

Since it's only one week old? call a Sony autorized servicer to have it repaired under warranty,possible bad main digital board.

From your description, it sounds like an alignment problem. There are 3 LCD panels in the projector. Each one displays an exact duplicate image of the others except it's either red, green, or blue. Under normal conditions, the images precisely overlay one another so you get a sharp image. Due to age, heat, or vibration/shock(impact) it would appear that the red LCD panel has shifted a little, giving the "ghosting" effect. You'll have to have the unit repaired by a qualified tech. He'll have the special electronic equipment needed to align the panels properly. Before sending the unit in, try a reset in the menu. Sometimes, the projectors can shift the image electronically, using math algorithms which will try to auto-sharpen the display. Hope I was able to help!---Rick

Your output device is likely trying to send out a YPbPr signal. On the output device try switching it to an automatic mode ideally or manually switching it to RGB. On the PS3 it is under the Video Settings section (Not the display settings.)

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

check that you have all avalubal resulutions sulected in your displt settings i.e. 480p 720p 1080i and 1080p all the ones your tv will support my ps3 was doing the same thing untell i checked 480p as well as 720p and 1080i now when I play a dvd my tv swiches to 480p and the dvd will play.

no its not the flash, it is the CCD. The replacement of the CCD will solve the problem.