This tv screen is 7inch wide and 6 inch tall. i can not get it work anymore it seems like I have no or only little power. it has an adapter and the light up front on the Tv is not stady anymore like it used to be bevor.i don,t know what is wrong ,it was working fine until jesterday. Cincerly irmgard lee
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it is an infrared remote... you can test it with a digital camera by turning the camera on and pointing the remote at the camera, then look at the viewfinder while pushing any button on the remote and if it is sending a signal you will see it illuminate in the viewfinder. This help identify if it is the remote or the device that is not working.
Sounds as though you have the set in zoom format. Check your remote for a screen format button and switch it to wide or normal format. This button may also be labeled as "Aspect" for aspect ratio which is the ratio of of width to height. Older sets had a ratio of 4:3 and the new wide screen sets are 16:9. In zoom format the pic. is expanded and pushes some of the pic. off the screen display area.
you have to take in affect on how old is the tv if you have had it a few years then the screen is going out and will only be a matter of time before it goes all the way out and you will be buying a new one if it not old and its one of the newer flat panels then its the signal that the tv is receiving if its hooked to a digital antena then you only get max of 720 from it on certain channels no matter if the channel or channels are showing hd with out a hd source your tv will not show better then that i have a 42 inch hd flat panel and use a antena and the best i get from my hd broadcast channels certain times will i get true hd like when the news is showing or when one of the series that was filmed in hd is on other then that i only get a 720 picture instead of a 1080 most commercals are not film in 1080 but in 720 max and i dont know why makes no since
sOUNDS LIKE YOUR OVERSCANNING FOR SOME REASON.. MMM STRANGE AS USUALLY THERES AN UNDERSCAN PROBLEM IN THE VERT WITH THESE SETS.Opps sorry about caps. I would check to see the power supply ic and make sure its not putting out more then its supose to as I remeber those are between 125 and 130 volt dc output. as maybe the High Voltage shutdowns not working.oh is is too long and too wide??? if its only like too tall there is a small opot on the pcb thats for the verticle height buit its so small and easy to break off and if you do that the set will lose the verticle sweep totally. good Luck