Question about Hunter Dryers

1 Answer

Need to oil Hunter Ceiling fan, Tyep G model 25539. Cannot find the place to insert oil. THANKS!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 377 Answers

There are only two places to lubricate a ceiling fan, the top and bottom of the armature that goes through the center of the motor. The blades in turn hook to this and rotate with it. The top of the armature, closest to the ceiling, is probably a little difficult to get at. The bottom of the armature is probably easier to get at. To do a complete job of lubricating both ends, the fan must be taken apart and cleaned of old lubricant which is then replaced with new. However, I have found that using a can of WD40 with the red extension nozzle is the best way to do it without taking the fan apart. Spray some WD40 at the lowest part of the armature supported by the motor housing. WD40 is better than oil because it penetrates better and it is less likely to cause a build up of dust and dirt that would cling to the oil.

Posted on Oct 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hunter ceiling fan pull chain for fan broke


First write down which color wire goes in which slot on switch.Turn power off! Disconnect wires from defective switch by inserting a paper clip or something a little bigger into the wire connection.Then press the spring down and release the wire to insert in new HUNTER switch. DO NOT CUT WIRES!Call 1-888-830-1326 with model # to order the correct switch.

Mar 24, 2013 | Hunter (25417) Ceiling Fan

1 Answer

I need to purchase a Hunter ceiling fan receiver. The receiver model # is 85069-060.


hunter technical support number is-- 1-888-830-1326 call this number and they should be able to help. good-day ! just tell them you need a new receiver, and give them the model number of the receiver and the fan model number.

Aug 25, 2011 | Hunter Ceiling Fan Remote Receiver...

2 Answers

How do I oil my Hunter fan?


You don't. There's no place to oil ANY ceiling fan, not just the Hunter line. All ceiling fans use sealed ball bearings in the motors. They are lubricated for life. If you're experiencing a squealing noise, it would be best to take it down, pack if up and take it back where you bought it. No ceiling fan should squeal, let alone one as expensive as a Hunter.

Apr 22, 2011 | Hunter Dryers

1 Answer

Need installation instructions for a Hunter Regalia ceiling fan, model 28642, item 183013, as the fan came without any. Am ready to install now!


Robin - Here's a link to the Owners Manual for the Model Number Hunter Ceiling Fan, you listed.
You may download and print it for future reference.

http://www.hunterfan.com/uploadedFiles/Support/Downloads/45065.pdf

Please don't forget to leave me a rating for helping you. Thanks!

Apr 14, 2011 | Hunter Heating & Cooling

1 Answer

Is sewing machine oil the same weight as ceiling fan oil?


No!


First, how old is this fan, and secondly is it exhibiting symptoms of low oil? If it is, just adding oil is not enough, you should change the oil in it, by removing the fan, placing paper towels (lots of them) around the part which the blades attach to and turn the fan over dumping the oil into the paper towels.

If it is not having problems and you just want to top it off, use either the Hunter fan oil, or a product called "Zoom Spout Oiler" Both are a 10wt Turbine oil. I have also used 5w20 engine oil in these fans with no ill effects, but I don't recommend it.

If you have any more concerns, don't hesitate to ask.

Here's the manual to your fan.


http://www.hunterfanhq.com/tools/sales/hunter/preseason/images/owners/41121.pdf

Sep 18, 2010 | Hunter 23852 Classic Original Ceiling Fan

1 Answer

Need the manual for our ceiling fan, Hunter, Park


i have to fans close to each other i would like to change the code on the remote

Apr 24, 2010 | Hunter Ceiling Fan Light Remote Control

2 Answers

I have a hunter ceiling fan (model #20537) which makes noise at low speed. Sounds like ball bearings need oil. Any suggestions?


Check with stores that sold it and see if they will warranty replacement. I think there is a lifetime warranty, thats why you pay the big bucks for the Hunter name.

Aug 02, 2009 | Hunter 20537 / 20538 The Vista Iron...

Not finding what you are looking for?
Dryers Logo

Related Topics:

445 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hunter Dryers Experts

Paul Bade

Level 3 Expert

1536 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Brandon Berry
Brandon Berry

Level 2 Expert

407 Answers

Are you a Hunter Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...