Question about Element Electronics 26 in. LCD TV

1 Answer

My television will not turn on. I made attempts to switch outlets and turn on the television manually with no success. I can tell the television is not taking any juice because the standby light is no longer on. The Model number is ELCHS261 and the serial number is GR800035890001184, it was built July of 2008.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Element Elec... Master
  • 8,457 Answers

No power to the tv at all?No,LED power light indication or no LED power standy light.The tv power supply board is dead.That the board,where it take in the power a/c cord plug into it.Tries websites like, to buy a refurbish power supply board for the replacement.

Posted on Oct 13, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Won't power on

Check your power outlet for any loose contacts and ensure there is power. Try connecting the TV to a different power outlet.

Switch off TV manually, switch off power, remove plug and retry after 48 hours.

If problem persists, please refer it to a qualified service technician.

Aug 04, 2012 | Apex Digital Apex 32 Class 720p 60hz LCD...

1 Answer

Does not turn on

Check power outlet. Change it to another and try. Change input device to something that works. Look for any jammed buttons on the remote. Switch off TV manually, switch off power outlet, remove plug and cool it off for 48 hours and retry. If it does not work even then, this may need attention by a qualified service technician.

Jul 27, 2012 | LG 37LP1D 37 in. LCD Television

1 Answer

Flashing blue red

Switch off the TV manually, switch off the power outlet, remove plug and retry after 48 hours. Then if the problem persists, this might need attention by a qualified service technician.

Jul 24, 2012 | LG 26LG30 26 in. LCD TV

1 Answer

Code 11 come out from the led. The heater rinnai 556FTR doesnt work at all. Code no 11 is blinking. Thank you

A couple of things can cause a Code 11(Ignition Failure): The gas line at the heater is not turned On or not turned on all the way. Also an obstruction in the Direct Vent Termination.

According to the Owner's Manual:
If the appliance fails to ignite, the appliance will attempt ignition after 1 hour. The "Ignition Failure" fault code, 11, will appear during that hour and disappears after a successful ignition. If ignition fails again, then the fault code will remain and another attempt to ignite will occur in 1 hour. The fault code is not stored in the fault code history.

If the flame is extinguished during forced combustion then the appliance will attempt ignition after 1 hour. The "Ignition Failure" fault code, 11, will appear during that hour and disappears after a successful ignition. Forced combustion takes place for about 15 seconds after ignition. After this time, the temperature control logic controls the combustion.

If the flame is extinguished (burner combustion failure) while the temperature control logic is operating the appliance, then the appliance will immediately attempt ignition. No fault code will appear.

If the problem was not either of the 2 listed above, the electronics may need to be reset. You can do this by turning the Master ON/OFF Switch to OFF and unplug the cord from the wall outlet. Leave the unit unplugged for 15 minutes, then plug it back in and turn the Master ON/OFF Switch to ON. The electronics should revert back to the original factory settings. From there you can set them as you like. If the reset attempt fails, a service call by an authorized service technician is the next step.

Hope this helped you to troubleshoot and solve the problem. Please let me know. Thanks.

May 31, 2011 | Rinnai RHFE-556WTA Direct Vent Heater NG...

1 Answer

Tv shut itself off,will not turn back on

spoiled fly back transformer which needs replavement

Sep 25, 2009 | Emerson LC320EM9 32 in. LCD HDTV

1 Answer

Stupid tv!

Sounds power supply board is bad in your TV and most probably replacement of all electrolytic capacitors in power supply board will solve the issue.
Take TV to local TV repair shop for repair.

Aug 30, 2009 | Akai LCT3201TD 32 in. LCD Television

4 Answers

T.V. turns itself off

before any attempt to deep cause of problem, unsolder first all the tack switches in the front panel of tv.then turn on the tv using remote control observe? cuz maybe one of the switches is stock.if not,proceed to eeprom servicing which is u have to look for service mode of ur tv model to unlock it and reset it to factory value.

Sep 12, 2006 | Philips 32RF50S 32" TV

Not finding what you are looking for?
Element Electronics  26 in. LCD TV Logo

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Element Electronics Televison & Video Experts

Cindy Wells

Level 3 Expert

5473 Answers


Level 3 Expert

489 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Element Electronics Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides