Question about Heating & Cooling
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Remote to fan won't work
Try this link for the ceiling fan remote it should be remote style M. I want a spare so I found this web page (page down)http://www.eceilingfans.com/ceiling_fan_remote_controls.html
Posted on Mar 23, 2008
The black goes to the L connection the others are a guess. You can do this two ways. Connect the colored wires in any sequence and then see what switch sequence give you high and lowest, the other one will be medium. Once you determine that, mark the wires with a piece of masking tape as high, medium and low. Otherwise you connect them, turn power on and use a multimeter to see which color gives you the highest voltage and which gives you lowest. Since you aren't comfortable using live wires and a meter, go with the first option and use the process of elimination to find the wires giving you the speeds you need to find the highest and lowest. Next, you need to determine how your switch sequence works. First pull has to give you highest speed. so you may end up wiring them in reverse if your first attempt is backwards. There is a reason the first pull needs to be highest, it powers up the motor so you can then chose a lower setting. A low setting first will over tax your motor and wear it out eventually as it has to work harder at first.
Let me know if you need further clarification and perhaps this is all you need to get fixed.
ps I checked on the Internet of a wiring diagram and I bet you did tok all to no avail.
Posted on May 27, 2008
SOURCE: Dip switch settings
I've had the same problem w/ light turning on/off. Called customer support and 3x waited 6 minutes to leave message and get no call back. Finally got a human and she told me to change code in receiver and transmitter. This was no easy task as the fan is very high up and the stupid thing needs to come down to adjust the receiver. Changed the setting and it worked for two days until it started back with the lights turning on at all hours. I noticed there's a toggle switch in the remote that is not explained in the manual. It says CFL on one side and INC on the other. The light will NOT dim if it's in CFL and tonight is the first time I've switched it to that setting. I'm hoping this is some kind of lockout for random signals going out of the remote...It would be nice to have a proper explanation in the manual. I should have gone with another Casablanca fan--Hunter products are lame.
Posted on Nov 14, 2008
This company in Texas http://www.eceilingfans.com/ceiling_fan_remote_controls.html has a nice visual method of showing all fan remotes - and I tol their offer of mailing in the defective parts and they seem to have exact replacement of the remote controller (fan end) parts.
Posted on Jun 14, 2009
SOURCE: Remote to fan won't work
This is a known problem with the remote receiver in these fan units. There is a TRIAC that controls the dimmer function (part BTA08-600C) and is attached to the metal bracket sticking out of the yellow plastic receiver housing. When this fails, the light is on all the time. You can buy the replacement part from Newark electric (www.newark.com) for 83 cents. If you aren't good with a pencil soldering iron, get someone to replace it for you. Takes about 30 minutes.
Posted on Nov 24, 2009
Tips for a great answer:
Oct 16, 2016 | Dryers
Feb 01, 2016 | Dryers
Oct 24, 2015 | Dryers
Feb 16, 2015 | Dryers
Oct 11, 2013 | Speed Ceiling Fan 3-speed Switch By...
Jul 23, 2013 | Dryers
Mar 19, 2011 | Heating & Cooling
Dec 31, 2009 | Dryers
Aug 03, 2008 | Dryers
352 people viewed this question
Usually answered in minutes!