Question about Haier HLT71 7 in. Portable TV

1 Answer

No power, worked yesterday - Haier HLT71 7 in. Portable TV

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Haier Master
  • 8,457 Answers

Unplug,replug tv it back an hour later let the tv reset itself back to factory setting.Should power up and work now.If tv run on a Litium battery.Check the battery,might needed to be changing.

Posted on Oct 12, 2010

  • fsuball5 Oct 13, 2010

    This did not help, any other suggestions, the TV is practically new and only used for maybe ten hours. Even if the battery is no good, should not the power adapter keep the TVgoing

  • Chi Chu Oct 13, 2010

    U have any amount of indication that the power comming to this tv at all?No,take the tv aparts,near the power a/c plug,there a fuse,change that fuse.Left it unplug,no power by battery either.24 hours later the whole system will reset and get out of protective modes,will work again.If nothing in the electronics components circuitries in the board in is burn out.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Model number of your vacuum is needed.
What were you vacuuming yesterday?
Did you hit something or pull up some strings?
What have you done to clean it since yesterday?
What is not working? Power? Suction? Beater?

Oct 16, 2013 | Miele Vacuums

2 Answers

I have a D-link DSL-2750U router worked fine till yesterday, but now its power led keeps on giving a red light it should give green a second or two later but it keeps givings

Reset router. There are two resets. A simple push reboots and holding it in clears all custom settings. Try the first.

This is a quick fix and usually does it. Test with network cable and work your way backwards to modem if you still have problems.

Nov 11, 2012 | Computers & Internet

1 Answer

I get only a black screen when I connect HDMI from hp pavillion dv5 laptop to twoTVs that worked well with this connection yesterday.

Hi you said it worked yesterday?
Then you must have all the correct cables and connection.
Take the power off and check if your connections are the same as yesterday. If they are let TVand laaptop rest for 5 minutes before you put the power on again.
good luck

Feb 21, 2012 | Computers & Internet

1 Answer

Emachine D2880 worked fine yesterday will not power on today

when you push the power button, fan or blower on power supply spinning or not? of not. your problem is power supply, nut if yes... did you hear any beeping sounds?

Jun 19, 2010 | E-Machines eMachines Desktop PC

1 Answer

Worked fine yesterday - will not turn on today - kitchen

When you say the machine is dead do you mean you are getting no LED lights at all or do you mean it is not booting up? No power and no post are two different things. With no power you get absolutely nothing at all. With no post you may have some LED lights but nothing comes up on the screen. You said power and power supply tested ok. How are you testing it? I need more info please.

Feb 07, 2010 | IBM ThinkPad T40 2373 Notebook

2 Answers

Power went out for a brief minute yesterday. My

vwhat is vijay maruti bomble (civil engineer) mobile no.

Aug 20, 2009 | Kitchen Ranges

1 Answer

Printer worked yesterday and today it has no

It's a bad power supply. go to and search for HP PSC 750 and there are numerous of new power supplies for the printer. Or, the wiring is dead inside the printer. Go to

It's either the PSU or a bad USB cable.

Jul 28, 2009 | HP PSC 750 All-In-One InkJet Printer

1 Answer


Hi there, you are experiencing a power supply board failure. this board may have used all its life up and unfortunately, it will have to be rebuilt or replaced.

Feb 05, 2009 | Maytag MDE9700AYW Neptune 174 Electric...

Not finding what you are looking for?
Haier HLT71 7 in. Portable TV Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74634 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Haier Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides