Question about Computers & Internet

1 Answer

When i plug my usb drive to my windows computer it says this -->Windows has stopped this device because it has reported problems. (Code 43) but when i plug it in my Mac it dosen't read it at all. just bought it today and has a lot of file i need on it. what do i do?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 50 Answers

Hi,

This issue was due to the drivers not installed properly, so follow the below steps to resolve the issue

Right click my computer and choose manage->goto device manager- > navigate to universal serial bus controllers - >if the drivers are not installed properly, you can see yellow spot on one of the devices-> right click-> unistall the device -> now plug in the USB device-> it will be working fine.

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Plantronics C420-M is not recognized


How To Fix Error Code 43 Windows has stopped this device because it has...

If Windows Device Manager is giving a code 43, this means the hardware is reporting something wrong when trying to connect. I'd do the following (and also check the attatched link for reference ;-) )

  • Unplugging the headset, restarting the computer, then plugging the headset back in.
  • Make sure the USB connector on your headset (and the USB port you're putting it in) is undamaged, and not dirty.
  • Try connecting the headset to another USB port, and another computer to see if you're able to reproduce the issue there (if not- it may just be the USB port(s) on your computer that you're plugging the headset into that's failing.
If all else fails, it may be time to purchase a new headset ;-)

Jan 22, 2014 | Plantronics Blackwire C420-M Headset

1 Answer

I cannot cannect my 6230i nokia to my computer when connected your device is reported windows error 43


Error Code 43 is a Device Manager error that means the following:
Windows has stopped this device because it has reported problems. (Code 43)
When you get this error with USB devices it's because one of the drivers controlling the device notified the operating system that the device failed in some manner. It will be of issue of the loaded corrupted drivers. You should reinstall the operating system or reinstall the drivers that doesnt have virus or file damages.

Oct 05, 2013 | Nokia 6230i USB

1 Answer

Windows has stopped this device because it has reported problems. (Code 43)


(laptop) unplug the power cord, then take out the battery, unplug all usb devices, leave it alone for a minute or two and then replug the power cord and then the battery. Turn the computer on and restart as normal. replug in your usb devices and they will reinstall as usual

Aug 13, 2013 | Sony Micro Vault Classic 4GB USB 2.0 Flash...

1 Answer

A lot of my favorite music is on my flash drive,error code 43 message


Code 43 Error Message

The Code 43 error is one of several Device Manager error codes. The Code 43 error will almost always display in the following way:

"Windows has stopped this device because it has reported problems. (Code 43)"

Details on Device Manager error codes like Code 43 are available in the Device Status area in the device's properties


rror Code 43 Troubleshooting

  1. Restart your computer if you haven't done so already.

    There is always the chance that the error Code 43 you're seeing on a device was caused by some temporary problem with the hardware. If so, a restart of your computer might fix the Code 43 error.

    Note: Some users have also reported that powering off their computer completely (not just a reset) and then turning it back on has corrected their Code 43 issue, especially if it exists on a USB device. In the case of a laptop, turn it off and remove the battery, wait a few minutes, and then put the battery back in and start the computer.

  2. Did you install a device or make a change in Device Manager just before the Code 43 error appeared? If so, it's very possible that the change you made caused the Code 43 error.

    Undo the change if you can, restart your PC, and then check again for the Code 43 error.

Jan 28, 2013 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

What is code 43


Code 43 Error Message

The Code 43 error is one of several Device Manager error codes. The Code 43 error will almost always display in the following way:
"Windows has stopped this device because it has reported problems. (Code 43)"
Details on Device Manager error codes like Code 43 are available in the Device Status area in the device's properties: How To View a Device's Status in Device Manager.

Cause of the Code 43 Error

A Code 43 error is generated when Device Manager stops a hardware device because the hardware reported to Windows that it's having some kind of unspecified problem.
This extremely generic message could mean there's a true hardware issue or it could simply mean that there's a driver problem that Windows isn't seeing as such but that the hardware is being affected by.

Error Code 43 Troubleshooting

Restart your computer if you haven't done so already.

There is always the chance that the error Code 43 you're seeing on a device was caused by some temporary problem with the hardware. If so, a restart of your computer might fix the Code 43 error.

Note: Some users have also reported that powering off their computer completely (not just a reset) and then turning it back on has corrected their Code 43 issue, especially if it exists on a USB device. In the case of a laptop, turn it off and remove the battery, wait a few minutes, and then put the battery back in and start the computer.

Did you install a device or make a change in Device Manager just before the Code 43 error appeared? If so, it's very possible that the change you made caused the Code 43 error.

Undo the change if you can, restart your PC, and then check again for the Code 43 error.

Depending on the changes you made, some solutions might include:

Jan 23, 2013 | Lenovo Computers & Internet

1 Answer

My usb device was working fine until yesterday when I plugged it in and I kept getting an Unknown device error with the following message: "Windows has stopped this device because it has reported...


Code 43 errors are nearly always caused by a driver issue. However, since you have tried the device in several different computers with the same result, I believe that your flash drive has gone bad or become damaged. Unfortunately this is not an uncommon problem with flash drives. Like any storage device on the computer, make sure you are backing up what is on your flash drive.

I hope this is helpful to you

May 28, 2011 | Dane-Elec DaneElec 4GB USB Drive Copper...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...