Question about Motorola Walkie Talkie 2-Way Radio

1 Answer

FCC ID: K7GFV300 one of the radios doesn't output sound, or the other one doesnt transmit it. i can hear the little buzz when you press the PTT button

Posted by on

  • Anonymous Mar 21, 2014

    its a ast 2 way am fcc id mkytr1350tx

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Motorola Master
  • 1,654 Answers

Check your programming first to see if the radios match perfectly. Here is a link to the user guide: http://www.giantintl.com/ContentManage/manuals/Moto/FV300%2001-11-08.pdf

Next, check the battery pack in the radio that is not transmitting. A low or bad battery can prevent a radio from transmitting, as it takes more power to transmit than to receive.

Lastly, check the mic hole to see if it is covered or has debris.

Best regards.

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not Transmit.Display Indicates "release mic button" and radio buzzes


The PTT button is probably stuck and your radio is already transmitting.
PTT = Push To Talk

Sep 09, 2014 | Boating

1 Answer

Unable to transmit


The CTCSS codes are probably not set correctly. Baofeng manuals are notoriously hard to read. Look online (Google) alternative programming instructions.

Jun 09, 2013 | Radio Communications

1 Answer

My Motorolla Talkabout T5530 will not transmit sound when I press PTT button. Also when PTT is pressed, all the displays come on, why? How do I get radio to function back to normal?


Hi,

Yes it is a Motorola, no it is not made in Malaysia, USA or UK, but mass produced in China under license, and there my friend lies the problem.

From personal and from the many others who've posted on this forum re: Chinese made radios, they are ****, and a waste of money.

Very little info available, and what is available is written in CHINGLISH, which is a mongrel to understand.

Spend little, get little....

Spend more, get more...

That's what I did and still do on ebay, for a trusted brand from $150.00 upwards, you will be doing yourself a favour, stay clear of any radio equipment made in China, it's rubbish.

Cheers,
Peter

Dec 18, 2012 | Motorola TalkAbout T5530 2-Way Radio

2 Answers

My walkie talkies arent communicating when i press the ppt button. it transmits too fast before i get a chance to talk into it. what can i do to fix them? is there a reset button? they are the motorola...


The ACTUAL problem is your rechargeable batteries have most likely depleted over time, and since it takes more batterie power to transmit than to receive it can appear that your batteries are fully charged and you can be receiving but due to the batterie it will be unable to transmit

Jul 26, 2011 | Radio Communications

2 Answers

President HR-2510 will not transmit or recieve


Hi Darrel,

Since you didn't say if you have ever used this radio successfully before, I have to assume it is "new to you" and that you have never seen it work or used one like it before. Start with a few basic settings below:

Turn Squelch to minimum.
Set RF Gain (if present) to maximum
Set Mode to AM or FM
Set volume to 1/3 up
Connect to 50 ohm dummy load.

Turn power on. Hopefully you hear static. If not, try SSB or FM. Still nothing? Try connecting to an external speaker.

Chnage back to AM or FM mode. Key mic check & for transmit indicator. If none, change mic or manually short the PTT contacts in the mic or at the radio to see if it can be made to xmit.

If no xmit - insert SWR meter between xmitter and dummy load. Try to xmit on AM or FM again while watching SWR forward power, if none indicated, xmitter is probably defective.

Replacing parts in a xmitter is not recommended. You'll need an FCC license and a fair amount of expensive test equipment to test repairs, set power levels and deviation and perform an alignment to be sure you aren't causing interference on other frequencies and bands.

You'd be better off bringing it to a radio repair shop for repairs and an alignment.

Sep 29, 2009 | Uniden Radio Communications

2 Answers

Uh049sx." BUSY" light on all the time. wont recieve


Contact a service center in your own country.
turn the squelch button down.

Oct 19, 2008 | Radio Communications

1 Answer

Ring tone thingy


Setting and Transmitting Call Tones
Your radio can transmit different call tones to other radios in your group so you can alert them that you want to talk.
To set a call tone:
1. With the radio on, press MENU 3 times. The current call tone setting flashes and displays.
2. Press + or - to change and hear the call tone.
3. Press MENU or PTT to set the new call tone or turn feature off.

http://www.motorola.com/mdirect/manuals/T50-T55_UserGuide.pdf

Sep 07, 2008 | Motorola Talkabout T5420 (14 Channels)...

1 Answer

Tk-3100


Hi Tucaraca.

With the radio OFF, switch to CHANNEL 1, press the SQUELCH and the PTT at the same time. Turn ON the power switch while keeping the PTT and SQUELCH until the LED indicator turns RED.

Release the buttons and then press the PTT to CHANGE the FREQUENCY.

Press the PTT once each time until you get to the right frequency you desire. The 8 standard frequencies are as follows: 464.500, 464.5500, 467.7625, 467.8125, 467.8500, 467.8750,467.9000 and 467.9250 MHz. Once you get to the frequency you use, wait a few seconds and listen for the confirmation tone. Each frequency has a different confirmation tone so take note in case you need to program a second radio.

After you hear the confirmation tone, press the SQUELCH to confirm, and then press the SQUELCH again to lock the new frequency. Wait until the LED turns off, then switch off your radio.

Same procedure for CHANNEL 2.

WARNING: You must be legally licensed to use any frequency on any PLMRS such as the TK-3100 series. You must also apply for FREQUENCY COORDINATION and submit FCC form 601. FCC can impose steep fines and imprisonment if they catch anyone using an unlicensed radio on a controlled frequency. Visit FCC.GOV for more information.

Nov 27, 2007 | Kenwood TK-3100K2 (2 Channels) 2-Way Radio

1 Answer

Moto T5620 Buzz


check if that radio has the QT feature eneable, be sure that you are not making any feedback when you press the ptt. If one of the radios could have a problem be sure if the Buzz is transmited or received for the radios

Jan 24, 2007 | Motorola Talkabout T5620 (7 Channels)...

Not finding what you are looking for?
Radio Communications Logo

980 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1654 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...