Question about HP LaserJet 4100 Printer

1 Answer

Hello, I can't seem to get my hp Laserjet 4100tn to print. I have set it as the default printer but when I hit print nothing happens. It just sits in the printer file reading error. Any ideas on what I may need to do? Thanks for your help. Ken

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,110 Answers

If this is a recent problem that just popped up I would clear out the print que on your computer where it says "failed to print"
Turn off the printer for a few seconds then turn it back on. Wait 1 minute then try printing again. If this does not resolve the problem then do the same again but also reboot your PC. 9 times out of 10 when a printer suddenly stops printing, rebooting the printer, the PC or both will fix the problem.
If none of this works then you could have a bad network card in the 4100.
Good Luck and Thank You for using Fixya.
WheatlandServices

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer hp 2055 fuser error 50.3


Re: hp laserjet 4100tn - 50.3 fuser error


A 50.3 error means that the temperature of the fuser got to high.
Just try switching it of for 20 minutes and try again.
If it happens during a large print job, this may help, if the error returns when powering up the machine, the fuser is faulty, but if so, that means it would have to be replaced.

If you are printing narrow media (A5, envelopes) etc. try printing them in small batches,, and allow the printer to cool of in between batches.

Apr 16, 2014 | HP Office Equipment & Supplies

1 Answer

HP 4100tn laserjet printer keeps turning off by itself, will not stay on


HI you will have to check the plug at the back of the printer make sure its in good or check the printer settings and see if there any stand by time set

Apr 23, 2012 | HP Office Equipment & Supplies

1 Answer

How do I connect my HP Laserjet 4100 to my router?


HP LaserJet 4100 printer C8049A HP LaserJet 4100n network-ready printer C8050A HP LaserJet 4100tn network-ready additional tray printer C8051A HP LaserJet 4100dtn network-ready duplex printer C8052A
Which model do you have? There is an optional card to install before you can have it connected to an Ethernet network if you just have the 4100 model.

Oct 29, 2010 | Computers & Internet

1 Answer

My HP 4100TN laserjet printer keeps going offline, in the middle of my printing. i switch it on and off and then it will resume. can you help please


first try a cold reset... power off machine hold down green button when power back on..if problem persists..replace with internal jetdirect card..
620n

Dec 29, 2009 | HP LaserJet 4100tn Printer

1 Answer

The right side of the printable portion of each doc prints light


You just need to remove the toner and reach in with a dry rag and wipe the little inch wide window that is above where the toner goes. This window gets covered with toner dust and makes prints lighter...It runs all the way from right to left above the toner and drum.

Nov 03, 2009 | HP LaserJet 4100tn Printer

1 Answer

Can't install hp laserjet 4100tn with no cd how do i install


Go to hp web sight and download the setup software. fast easy

Jan 14, 2009 | HP LaserJet 4100n Printer

1 Answer

4100 stops printing mid streem and engins continue to run


Try printing out an error log and seeing if that leads you anywhere.

Nov 25, 2008 | HP LaserJet 4100tn Printer

2 Answers

Printer Pauses every few pages, seems to print slower than it shouls


More likely to be Network print spooler issue, check settings on driver.

Nov 09, 2007 | HP LaserJet 4100n Printer

Not finding what you are looking for?
HP LaserJet 4100 Printer Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...