Question about PC Laptops

6 Answers

Internet download manager detected that is registry keys had been damaged since the last run sir i get the same message everytime when i either open internet explorer or idm , what should i do? is ther some problem with patching?

Posted by on

  • 2 more comments 
  • Anonymous Dec 25, 2008

    same probs plz help........

  • vkrk077 Jan 05, 2009

    i also receive following message when i tried to open idm
    "IDM detected that its registry keys had been damage since the last run.
    It's possible that you run a flaky spyware remover program which
    corrupted system registry. IDM will try to restore all damaged data,
    but some data may remain corrupted."
    please help me to solve this problem


  • subashmatthe Feb 27, 2009

    i get the message after i installed idm that your idm detected that its registry keys had been damaged since the last run. how to solve this problem

  • dhruva316 Mar 29, 2009

    internet download manager detected that is registry keys had been damaged since the last run

    sir i get the same message everytime when i either open internet explorer or idm ,

    what should i do?

    is ther some problem with patching?

×

6 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 458 Answers

Sounds like you have spyware. This is a common problem. Try the following.

Turn the system restore off. System restore keeps everything in restore. Meaning......... If you have spyware or a virus, it will stay in your system. Run Spybot S&D (This program is free and is better than using msconfig as long as you go through the settings and change everything to the highest settings.) Then do the same with Adaware 2008 (sounds stupid to use 2 things for spyware, but one catches what the other one does not.). I have links on my website (tandnfamilyelectronics-online.com). These links go directly to the download so you will not get the run around. You would do good to try a program called Window Washer (http://www.download.com/Free-Internet-Window-Washer/3000-2144_4-10436825.html?cdlPid=10731707). This is a great program that completely cleans anything in your computer that you do not need. It will not clean out anything that you have to have. I have used this for years to clean out my customers computers and have cleaned as much as 3 gigs of trash out. If you contact me I will give you some tools that I have for free that will do a great job on your computer. I have them ready to download and I will give you the link. (dean@tandnfamilyelectronics-online.com)

Send me the complete specs of your system and I can help you more. I hope that this helps you. There is no reason the really buy a program for spyware when there are free things to use that work great. Free AVG is a great Antivirus and yes it is also free. It will check your e-mail coming and going. It will also let your friends now that the E-mail does not have a virus. It also has a spyware program that is free. This day and time with all of the spyware out on the net you can never have too many programs for spyware. I would not run all of them at the same time though. Make sure that you do not use your computer during any scan. Defrag is also something to do after you do everything else. Some people will tell you that should not reload your computer. If nothing seems to work then sometimes that is the only good way to get it repaired right. Most of the programs that come pre-installed on a store bought computer is useless and most are even trail software that causes problems when they expire. Let me know if this helps at all. Please rate me as FIXYA if it helps.

Posted on Jun 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 39 Answers

Http://rapidshare.com/files/221513944/IDM5.x_with_crack.zip

remove the old IDM...including the registry keys...Install this IDM...& start downloading with speed

Posted on Apr 15, 2009

  • Lolliepop Rain Feb 27, 2012

    It says your download doesnt work! O_O And Yes I m having that problem in 2012! PLEASE HELP ME! :(

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Internet download manager detected that is registry keys had been damaged since the last run sir i get the same message everytime when i either open internet explorer or idm , what should i do? is ther some problem with patching?

Posted on Feb 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 426 Answers

Clearing out my page ignore this message

Posted on Jun 19, 2008

  • Lee N.
    Lee N. Jun 19, 2008

    clearing my work page please ignore

×

This is very good thank u it really helped

Posted on Jul 19, 2008

Uninstall the Idm completely reboot download and install a new version of idm and hurray enjoy work.....

Posted on Jun 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I DOWNLOAD MINECRAFT 1.6.1


I think there is problem with Lightweight Java Game Library in your system
so first I will suggest you to Clean Registry Junk and Defrag the Registry
Delete Browser History and Cache
Open task manager and close any unnecessary processes running in background
Let me know if it helps you.
Use system utility tool like RegInOut to fix registry and windows errors which causing this issue

Jul 08, 2013 | PC Laptops

5 Answers

Idm has not been resistered ,trial period is over & idm is exiting?what i m going to do?


IDM - (internet download manager) unfortunately when trial version expires it poses a problem. The only thing you can do is buy a license. You can install a new download manager though. You can have it installed again after removing the all its dependency files from registry.

Mar 26, 2011 | Toshiba PC Laptops

1 Answer

Microsoft WPD FileSystem Volume Driver message Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)


Hello.

It seems you have a faulty driver.

Recommended resolutions
A registry problem was detected.
This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey. Here are some things that you can try to resolve this problem.

Method 1. Uninstall and reinstall the driver
Uninstall the driver from Device Manager and scan for new hardware to install the driver again. Here is how: First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type "devmgmt.msc" (without quotation marks) in the "Search" bar and press "Enter". Click "Continue" if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.

You may be prompted to provide the path of the driver. Windows may have the driver built-in, or may still have the driver files installed from the last time that you set up the device. However, sometimes, it will open the New Hardware Wizard which may ask for the driver. If you are asked for the driver and you do not have it, you can try to download the latest driver from the hardware vendor's Web site.
  1. On the device Properties dialog box, click the Driver tab, and then click Uninstall . Follow the instructions.
  2. Restart your computer.
  3. Open Device Manager, click Action , and then click Scan for hardware changes . Follow the instructions.
Method 2. Revert to the most recent successful registry configuration This content is designed for an advanced computer user.
The Last Known Good Configuration feature is a recovery option that you can use to start your computer by using the most recent settings that worked. The Last Known Good Configuration feature restores all the registry information and driver settings that were in effect the last time that the computer started successfully.
With regards FIXYA team **Please post your feedback and Vote if the problem resolved as per your satisfaction**

Sep 27, 2010 | Sony VAIO VGN-SZ440 Notebook

2 Answers

I have HP Pavilion 9500,Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)


Code 19 Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. To fix this problem you can first try running a Troubleshooting Wizard. If that does not work, you should uninstall and then reinstall the hardware device. (Code 19) Recommended resolutions

A registry problem was detected.

This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey. Here are some things that you can try to resolve this problem.

Uninstall and reinstall the driver

Uninstall the driver from Device Manager and scan for new hardware to install the driver again.

You may be prompted to provide the path of the driver. Windows may have the driver built-in, or may still have the driver files installed from the last time that you set up the device. However, sometimes, it will open the New Hardware Wizard which may ask for the driver. If you are asked for the driver and you do not have it, you can try to download the latest driver from the hardware vendor’s Web site.
  1. On the device Properties dialog box, click the Driver tab, and then click Uninstall. Follow the instructions.
  2. Restart your computer.
  3. Open Device Manager, click Action, and then click Scan for hardware changes. Follow the instructions.
Revert to the most recent successful registry configuration

This content is designed for an advanced computer user.

The Last Known Good Configuration feature is a recovery option that you can use to start your computer by using the most recent settings that worked. The Last Known Good Configuration feature restores all the registry information and driver settings that were in effect the last time that the computer started successfully.

For more information about the Last Known Good Configuration feature, click the following article number to view the article in the Microsoft Knowledge Base: 307852 (http://support.microsoft.com/kb/307852/ ) How to start your computer by using the Last Known Good Configuration feature in Windows XP Edit the registry

This content is designed for an advanced computer user.

As a last resort, you can edit the registry directly. For more information, see the Registry Reference in the Microsoft Windows 2000 Server Resource Kit at the following Microsoft Web site: http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/default.mspx?mfr=true (http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/default.mspx?mfr=true) The registry information applies to Windows XP

hope this helps
please leave feedback
thanks
Robb

Apr 21, 2010 | PC Laptops

1 Answer

Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)


Code 19 Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. To fix this problem you can first try running a Troubleshooting Wizard. If that does not work, you should uninstall and then reinstall the hardware device. (Code 19) Recommended resolutions

A registry problem was detected.

This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey. Here are some things that you can try to resolve this problem.

Uninstall and reinstall the driver

Uninstall the driver from Device Manager and scan for new hardware to install the driver again.

You may be prompted to provide the path of the driver. Windows may have the driver built-in, or may still have the driver files installed from the last time that you set up the device. However, sometimes, it will open the New Hardware Wizard which may ask for the driver. If you are asked for the driver and you do not have it, you can try to download the latest driver from the hardware vendor’s Web site.
  1. On the device Properties dialog box, click the Driver tab, and then click Uninstall. Follow the instructions.
  2. Restart your computer.
  3. Open Device Manager, click Action, and then click Scan for hardware changes. Follow the instructions.
Revert to the most recent successful registry configuration

This content is designed for an advanced computer user.

The Last Known Good Configuration feature is a recovery option that you can use to start your computer by using the most recent settings that worked. The Last Known Good Configuration feature restores all the registry information and driver settings that were in effect the last time that the computer started successfully.

For more information about the Last Known Good Configuration feature, click the following article number to view the article in the Microsoft Knowledge Base: 307852 (http://support.microsoft.com/kb/307852/ ) How to start your computer by using the Last Known Good Configuration feature in Windows XP Edit the registry

This content is designed for an advanced computer user.

As a last resort, you can edit the registry directly. For more information, see the Registry Reference in the Microsoft Windows 2000 Server Resource Kit at the following Microsoft Web site: http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/default.mspx?mfr=true (http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/default.mspx?mfr=true) The registry information applies to Windows XP.

Good Luck .. !!

Nov 22, 2009 | Acer Aspire 5315 Notebook

2 Answers

Disc drive icon not shown even after cd is inserted


If you are receiving this Code 39 error and your CD or DVD drive is missing and has a yellow exclamation mark in Device Manager, I hope this information is to solve this error, follow these instructions: After removing these registry keys and rebooting, it may be necessary to reinstall any CD or DVD recording applications.
1) Close all open programs

2) Click on Start, Run, and type REGEDIT and press Enter

3) Click on the plus signs (+) next to the following folders
  • HKEY_LOCAL_MACHINE
  • SYSTEM
  • CurrentControlSet
  • Control
  • Class
  • {4D36E965-E325-11CE-BFC1-08002BE10318}
4) This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.
  • UpperFilters
  • LowerFilters
  • UpperFilters.bak
  • LowerFilters.bak
5) If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

6) After deleting the keys, close the Registry Editor


7) Reboot your computer


8) Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.



Thank you Sir, Have a nice day.

Sep 21, 2009 | Lenovo 3000 Y410 Notebook

2 Answers

DVD Mutirecorder drive driver


hi, I have scoured the internet and this worked for me

Fixing Code 39 Error
If your CD-ROM drive is not visible in My Computer, you may see the following error message displayed with the CD or DVD drive item in your Device Manager. (Steps to open Device Manager are discussed later in the article.)
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
Using Device Manager
To fix this error, first try to update the driver from the Device Manager. To open Device Manager, right-click My Computer on your Desktop, and then on the Hardware tab, select the Device Manager button.
In the Device Manager window, identify the CD or DVD drive item (with Yellow exclamation mark), right-click on it and select Update Driver. Follow the screen instructions to update the device driver and restart your PC.
Using Registry Editor
If updating the driver does not resolve the problem, it indicates that there is a problem in the registry. To fix this problem, you may have to remove a few keys from the registry.
Note: Be careful while working with the registry editor because changes done to the registry using the Registry Editor are irreversible and mistakes can leave you with more problems than when you started. Therefore, it is recommended that you make a backup of the registry before proceeding with the changes.
After you have removed the registry keys listed below, you will have to reinstall all applications that you use for CD or DVD recording to make them work properly.
To fix the error by editing the registry, perform the following steps:
  1. Exit and close all applications currently running on your PC.
  2. On Start > Run type Regedit and press the Enter key.
  3. Next, navigate to the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  4. Delete any of the following registry entries if they exist under this key:
    • LowerFilters
    • LowerFilters.bak
    • UpperFilters
    • UpperFilters.bak
  5. Restart your PC and open My Computer to ensure that the CD-ROM drive is visible.
  6. Also, open the Device Manager again to ensure that the yellow exclamation mark and the error code is now gone.
  7. Restart your PC and open My Computer to ensure that the CD-ROM drive is visible.
  8. Also, open the Device Manager again to ensure that the yellow exclamation mark and the error code is now gone.

It sounds complicated but it was actually quite simple, just make sure you delete the right files.

Aug 02, 2008 | Toshiba Satellite A100-S8111TD Notebook

Not finding what you are looking for?
PC Laptops Logo

Related Topics:

6,872 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Laptops Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...