Question about Apple MacBook PC Notebook
I have a macbook with a dvd rom that you slide into side of computer, not place into position. but the driver for my new phone is a 3' cd can you get something to place cd into so I can put into my dvd rom.. Or what would the best thing to do
Since Macs are not compatible with 3' cd's the only way it could work is if you had an external cd drive. You can even get them cheap! Here is a link to one on a website. I never used this website to purchase anything but its just to show you what you might consider looking for!
I personally hate how macs are not compatible with 3 inch cds but I hope this helps you out and good luck!
Posted on Jun 02, 2008
Try viewing the files on a PC and copying them onto a USB memory drive and taking it across to your MAC to install.
Posted on Jun 03, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 06, 2014 | Apple MacBook Pro Laptop Computer with...
Aug 18, 2011 | Lenovo 3000 Y410 Notebook
Unplug the power cable from your power supply and open up your computer Don't forget to wear your antistatic wrist band. Determine which drive bay you are going to install a CD-ROM into. You should pick on of the uppermost drive bays. Before you install a CD-ROM, make sure you have the proper jumper settings. Since we are only installing a single CD-ROM, set the jumpers as MASTER. The jumper settings are different for each CD-ROM drive, so consult your owner's manual so you know which pins to cover up. Once you have the jumpers set, install your CD-ROM in the computer's case. How you secure the CD-ROM in one of the uppermost drive bays depends on your case. Some CD-ROM drives have to be screwed into the drive bay, while other cases come with brackets (like mine) to attach to the CD-ROM drive so that it slides into the drive bay and locks in place.
Connect the power to the back of the CD-ROM drive, then connect the ribbon cable to the back of the CD-ROM drive. Your ribbon cable has three connectors, one in the middle and one on each end. The middle connector is a "SLAVE" connector that is used if you would install an additional CD-ROM or DVD-ROM drive.
Connect one of the end connectors to the CD-ROM drive, and connect the other end connector to the appropriate spot on your motherboard. Note, hard drives and CD-ROM drives have the same style of connector on the motherboard. You want to connect your CD-ROM drive to the motherboard slot that isn't red or is the highest numbered of all the IDE slots.
Power on your computer after you plug it in. Your computer should recognize the new CD-ROM. If it doesn't, Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver
Hope this helps
Jul 04, 2011 | LG GH22NS50 22X DVDRW SATA Drive OEM...
Nov 04, 2010 | Computers & Internet
Aug 04, 2010 | Computers & Internet
Jul 07, 2010 | Acer (91.42R37.001) CD-RW/DVD-ROM (Combo)...
Dec 10, 2009 | Acer Computers & Internet
Nov 27, 2008 | Acer Computers & Internet
Dec 07, 2007 | Acer Aspire 5100-5033 Notebook
Jun 13, 2012 | Apple MacBook PC Notebook
669 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: