Question about Frigidaire FEF366DC Electric Kitchen Range

Open Question

How do i replace burner switch on frigidaire eletric stove model fef389wjcb

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
aborcass
  • 2651 Answers

SOURCE: Burner no longer functions

two thiongs, you might have a bad switch( under control knob), or before you try that ck the old elemnt that you replaced, on the back of the limiter( the glass rod that goes through elemnt itlself), you'll see little letters 1a,2a,1b,2b.--- new replacemnets depending on age are wired differently, they too will have 1a2a1b2b but in different position. id check that first

Posted on Mar 03, 2008

Ad
dmathwizard
  • 113 Answers

SOURCE: replacement burners

I could not find your model on new world appliances but here is the website: http://www.newworldappliances.com

call them and ask them where you can get the burners.

Posted on Mar 03, 2008

BNewberry
  • 93 Answers

SOURCE: how do you replace a burner switch on a Frigedaire Glasstop Stove

Hello,

The repair on this stove will be relatively easy then. All you are going to have to do is pull out the stove from the wall and remove the upper part of the back panel where the burner switches are.

Remove the knob and take out the screws that hold the switch to that front panel. Then from there just match up the wires to the new switch off the old one.

This repair will turn out to be pretty cut and dry for you. If you have anymore questions please ask.

Thanks Again,
Bill

Posted on Jan 10, 2009

TheMazz
  • 78 Answers

SOURCE: heating element stays on when turned off

The thermostat (that is the dial that you turn to energize the heating elements) is the only thing that connects power to and disconnects power from the heating element. It is bad.

You can unplug the unit and remove the thermostat. Take it to a parts supplier and get a new one and install it. Your problem will go away.

If you would like to see a wiring diagram...click on this link:

http://manuals.frigidaire.com/prodinfo_pdf/Springfield/316255301.pdf


If this was helpful, please select YES to the first two RATINGS questions. Good Luck!

Posted on Oct 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing burner on slide in FES365ECA frigidaire stove


Good Afternoon Friend,

I understand you are trying to get assistance on how to access the burners on your glass-top Frigidaire range, model# FES365ECA. I suggest contacting the manufacturer. They might have some type of diagram that will assist you in replacing the burner. My other suggestion would be to contact your local authorized technician for further assistance. The technicians have been trained to replace parts on your range. Hope this is helpful.

-Best Regards-
WP

May 18, 2014 | Frigidaire Kitchen Ranges

1 Answer

I have a Frigidaire gas stovetop range that smells of gas only when the power plus burner is lit


I hope you haven't cracked the tubing to the burner. If the stove is a sealed burner model it could be that when you tried to open the top you could have cracked the tubing to the burner. I had this happen to a client just a few weeks ago. The damage was so bad they had to buy a new stove. You may be able to replace just the offending burner tube.

Mar 16, 2014 | Frigidaire Ovens

1 Answer

The eletrical outloet on my stove top


Without knowing your model #, I would say it is a fuse. The fuse on mine is under the left rear burner.

Dec 12, 2013 | Frigidaire Kitchen Ranges

1 Answer

Replacing a burner on a frigidaire electric stove


If you are talking about one of the four(4) elemnts on the top, all you need to do is pull it out and slide the new on back in. According to the model you provided, it has just the standard coil surface burners.

Good Luck!!

Feb 28, 2009 | Frigidaire FEF352 Electric Kitchen Range

1 Answer

Large burner won't shut off


This stove uses a special switch that turns one way for the large burner and the other way for the smaller burner. I was not aware that this had a seperate simmer burner on it, however. I think you using the wrong term there.

This is not computer controlled--the only computer on it should be the oven switch. I would assume that you need to replace the switch for the dual-size burner. If you take your model number in to Sears, or log onto Sears dot com, you should be able to get to the PARTS DIRECT web site on the computer, and if they ever sold that model you should be able to pull up a parts breakdown with expanded drawing and part numbers and prices. You should be able to buy the part from them. The part should be virtually the same as ANY recent model Frigidaire or Kenmore stove with the same style burner. This should be a very easy repair for you to make yourself, assuming that you know a little about working with electricity--remember, this stove USES 220 VOLTS!

Check out all of the wiring coming into the switch and going from the switch to the burner to be sure that there is not a short!

If you have one of the older smooth surface stoves, where the burners are part of the ceramic top, all bets are off, but anything you bought new in the last half-dozen years, should have a separate burner underneath a glass top, and the repair should be simple. Even with the older stove, it is still likely the switch, and should be no problem.

Feb 09, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

2 Answers

How do you replace a burner switch on a Frigedaire Glasstop Stove


Hello,

The repair on this stove will be relatively easy then. All you are going to have to do is pull out the stove from the wall and remove the upper part of the back panel where the burner switches are.

Remove the knob and take out the screws that hold the switch to that front panel. Then from there just match up the wires to the new switch off the old one.

This repair will turn out to be pretty cut and dry for you. If you have anymore questions please ask.

Thanks Again,
Bill

Jan 10, 2009 | Frigidaire FEF366DC Electric Kitchen Range

2 Answers

Burner no longer functions


two thiongs, you might have a bad switch( under control knob), or before you try that ck the old elemnt that you replaced, on the back of the limiter( the glass rod that goes through elemnt itlself), you'll see little letters 1a,2a,1b,2b.--- new replacemnets depending on age are wired differently, they too will have 1a2a1b2b but in different position. id check that first

Mar 02, 2008 | Jenn-Air JES9800AAS Electric Kitchen Range

2 Answers

Problem with Kenmore Electric stove


I have kenmore stove mod.790-95660103 you turn on any top burner . T he small one inside the big burner comes on Roy

Nov 24, 2007 | Kenmore 40494 / 40495 / 40499 Electric...

Not finding what you are looking for?
Frigidaire FEF366DC Electric Kitchen Range Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

171 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...