Question about Standard (CRT) Televisions

3 Answers

Connecting dvd

TEAC ct-m6602s , probably 10 yrs old / australia / and standart dvd player . We conect tv and dvd player using euroconnector / one end / en component conectors / other end , dvd end / we can not see any dvd picture on tv screen . Why ? regards , george from brisbane australia

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 47 Answers

The euroconnector is a pretty straight foward device and the standard dvd player outputs on all port simultaneously unless of course you have a special model. (btw what model of dvd player are you using)

First check if there is a input output switch on the device make sure it is set to input. Also make sure you select the source on that television. If possible change the input source to video.

Good luck!

Posted on Jun 01, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 347 Answers

Can you hear sounds once you have conected it? That one is the cable that has white, red and yellow colors right? Make sure you are placing them in the right places, and you could try with a different cable. Maybe the one you are using is damaged

Posted on Jun 01, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 97 Answers

First, are you sure the cable is good? can you try it somewhere else? Second make sure your DVD is setup to output via component and the TV is using the input your connecting to.

Posted on Jun 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't change channel 3 to video for dvd playing - video won't come on to use with dvd player


I SUGGEST YOU USE AV CABLES( RCA ) AN CONNECT TO THE AV INPUT OF THE TV

Jun 20, 2013 | Panasonic CT-36D32 36" TV

1 Answer

No color when playing dvd


try to connect cables again. make sure you push them strongly to maka sure it works. if that won't work your dvd or tv is damaged

Apr 06, 2010 | RCA Standard (CRT) Televisions

1 Answer

I cannot get any TV channels on my Sony TV


It sounds like you have identified the the correct problem, as the Coax connector has probably been knocked loose from the circuit board inside the TV. If you have any knowledge on this sort of thing you can take it apart and re solder the connections. If not I suggest you take it to be serviced by a professional.

Dec 10, 2008 | Standard (CRT) Televisions

1 Answer

Standart television


How to change TV setting to video mode so I can connect a VCR/DVD combo player.

Mar 25, 2008 | Standard (CRT) Televisions

1 Answer

Grundig TV - Tuning DVD & VCR


Hi there!
If the DVD recorder has an RF out then you should be able to tune it on UHF bandwidth. The cable should run from the RF Out on the recorder to RF on the TV. Switch the recorder on, put in a DVD and press play before tuning. Some DVD's require a disc before a Menu appears. Good Luck, Regards, JUS004

Mar 23, 2008 | Grundig GF70-600 TV

1 Answer

No sound when playing DVD


go into your setup menu and activate your av settings on your tv set.

Mar 19, 2008 | Standard (CRT) Televisions

1 Answer

Hi there


Check your DVD or Video player manual for regional setting, you may simply be set to the wrong region. Some players have a regional button on the remote control.

Regional settings allow DVD's or Videos to be played on the same player by simply selecting the correct regional setting.

If you are on the wrong regional setting, your picture will most likely appear in black and white.

Jan 12, 2008 | Standard (CRT) Televisions

3 Answers

TEAC Television -CT-M809AV -no picture


Maybe it's something with NTSC/PAL settings, or SOURCE SELECT. Check troubleshooting in your manual.

Oct 11, 2007 | Sylvania 6419TE 19" TV

2 Answers

How to hook up a DVD player


Go to this link; http://www.amazon.com/RCA-32-Stereo-TV-F32450/dp/B00006HMDB and a short way down under "Product Details" there is a link to the product manual page 7 and 8 of the manual (page 9 and 10 of the pdf file) should tell you what you need to know. Please post again if you still have trouble; Hope it helps :)

Mar 29, 2007 | RCA F32450 32" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...