Question about Whirlpool Washing Machines

2 Answers

How do I avoid lint in my top load whirlpool washer model 5132E

Posted by on

  • Rajiv Relan Jun 10, 2008

    Thanks for the solution, but I am sorry to say that I did not find any screen or mesh but three small holes and you can feel the plastic drum below them. Its a new machine with hardly 40-50 washes. Even though I cleaned the whole surface and bottom of the agitator but all in vain. The problem persists.
    Please suggest some other remedy.
    I feel be highly obliged
    Rajiv


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

HOw do you take out the agitator?

Posted on Sep 12, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 868 Answers

If you remove the agitator youll see the screens that catch the lint.The machine was designed to use the motion of the agitators bottom end and force the lint into the screen,but........in time they get clogged up and there is where your lint problem starts to show .If you remove the agitator the lint screens will be easier for YOU to clean.

Posted on Jun 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the lint trap and how do i clean it?


If the model number is true in the blue this a top load washer there is no lint trap lint collects on the protrusions on the outer side of the basket and is washed away during the rinse drain spin cycle

Aug 28, 2014 | Whirlpool WTW8600YW 4.6 cu. ft. Cabrio...

1 Answer

Does the Whirlpool, top loading lsr6332kq1 have a lint filter?


I will suggest you steps to check whether your washing machine has a lint filter. Follow the instructions below.
1)Turn off the washing machine and open the lid or door if you have a front-loading appliance.
2)Place your hand on the upper lip of a front-loading or top-loading washer tub and feel around the circumference for a flat tab. Pull out this tab, which is the handle for the lint filter. If you cannot find a tab on a top-loading washer, continue troubleshooting.

3)Unscrew the cap on the top of the agitator in a top-loading washer. The agitator is the center cone inside the appliance.

4)Pull the lint filter out of the agitator and rinse under cold, running water to clean.
5)Slide the filter into position as far as it will go. Replace the agitator cap if your appliance uses a lint filter in the agitator.

Mar 28, 2013 | Washing Machines

1 Answer

Our Whirlpool Calypso model #GVW9959KL washing machine has started leaving light colored marks (kind of look like lint, but won't brush off like lint might) on dark clothes. Do you know of a way to...


sounds like you might have mold inbtween the tubs and its starting to wash loose and get on your clothes. try a washer cleaner like washer magic and see if that helps.

Feb 20, 2011 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Hi i have a whilpool 5132E top load washing machine i bought second hand, my cloths collect fluff, especially the towels. Does thi model have a filter.thank you chrissie


no but it sound like the agitator has a sharp edge and chewing up the cloths feel your finger all the surface area of the plastic and feel for a gouge or rough area then get sandpaper or other type of item that will smooth it out and that should stop the fluff issue

Sep 08, 2009 | Whirlpool Washing Machines

1 Answer

Why does my washing machine leave lint on my clothes? does this type of washer have a lint catcher?


Most washers don't have lint traps, the dryers are expected to. In your type of top loader some simple traps would be located in the top cap of the agitator. They should be cleaned each load, but they only stop the bigger pieces.

Jul 15, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

2 Answers

Finding Lint Filter on Kenmore 70 Series Model 110


I've got a Kenmore 70 Series, Model # 82370120 washer and the lint filter in under the machine. I had to tip the thing over to get at it.

Apr 19, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Washer problems


Remove your drain pump and check for lint and debris.

Feb 23, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...