Question about GE Profile Harmony DPGT750EC Electric Dryer

1 Answer

GE Profile Electric Dryer, Blower nt getting up to speed

We have a GE Profile Harmony Dryer, with communication to the washer (which we currently have deactivated) and the blower motor is not getting up to speed. My husband took the blower motor off and cleaned it and put it back in, and the dryer worked VERY well for about 8 full loads, then it began again, not getting up to speed, which you can hear, now it will not even kick on. Took the motor off cleaned it again same problem. We found where you can turn your unit on push help, at help screen hold back and heart button, the service screen said blower motor not getting up to speed, and sometimes it even says the inlet thermostat has issues. Could some one please help? I have the same blower problem. I've taken off the top and front covers of the dryer. What's the trick to getting the side off?

Thanks!

Posted by on

  • Anonymous Nov 24, 2008

    Dryer starts and runs fine for a few minutes, then blower completely quits. Drum continues spinning, but no heat or no airflow. Self diagnostics say "the blower motor not getting up to speed". Sometimes also "there is a problem with the input thermistor".

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 54 Answers

You need to replace the blower motor. It says you are having temp problems because the blower is quitting and the heater is overheating.

Posted on Jul 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GE Profile Harmony DPGT750EC Electric Dryer not heating


inverter board may be bad. how long have you had the machine

May 07, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE profile harmony dryer electric won't heat after first load


Did you end up replacing this thermistor? If so did that solve the problem? We are having the same issue and I don't want to waste time and $$.

Dec 22, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

The blower and heat are not working my ge harmony electric dryer


If blower isnt working you wont feel any or very little heat in the drum

Aug 19, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

DescrI have a GE profile harmony electric dryer model #dpgt750ec1pl. About 5 minutes into a drying cycle the blower shuts down. There is still heat but no air coming out of the dryer duct. Any suggestions?...


you should not have heat when motor stops there is a switch in the motor to shut the element off....yours is not working(you could burn your house)replace the motor.
PLEASE DO NOT TRY IT AGAIN...can't be lucky all the time

Aug 07, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Harmony Elec. Dryer Blower Stops working or won't start up


Do this.

press "Home"
press "Help"
press both "My Cycles" and "Back" at the same time and hold them until service mode pops up.
It will tell you what's wrong.

Jul 22, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Ge harmony won't heat up and blower does not work


Found Manual here:http://www.affordableappliance.com/Download%20Folder/GE_Harmony_Dryer.pdf

GOOD LUCK!

Mar 11, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Blower motor access


You cant you have to remove the control panel, dryer top, top heat shield, dryer front, front drum support, belt, and then the drum in that order to get to the heater. I have been working on these since they have been out and have never changed a heater in one, They just dont burn out. Unplug the dryer and take the access cover off where the power cord attaches to the dryer and make sure the wires are not loose or burnt.

Jun 01, 2008 | GE Profile Harmony DPGT750EC Electric...

3 Answers

GE Profile Harmony Gas Dryer DPGT750GC1PL not heating


post your email i will send you the book there are too many things to check via posting here

Mar 09, 2008 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Electric Dryer, Blower nt getting up to speed


On all the ones I've seen with this problem, they've needed a new blower motor. Don't take that as the golden answer because even G.E. tech support doesn't know. It could be the control board, but I haven't seen that yet. G.E. always recommends replacing the inlet thermister, which is accessed through a little cover on the back. Good luck & welcome to the wonderful world of complex electronic appliances. 

Jan 27, 2008 | GE Profile Harmony DPGT750EC Electric...

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Cindy Wells

Level 3 Expert

4945 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...