Question about Asko D1706 Built-in Dishwasher

2 Answers

ASKO D1706 This dishwasher was working well then it tripped out the fusebox and keeps on doing so. The on light is on when connected but when you shut the door it trips the fuse box on the house. The wiring looks ok, there is no water leaks in it. Any ideas

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I agree with marine0612, It depends on when it blows the fuse box.

Posted on Jun 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Look at the pwr supply box on the dw check for a short to ground in the main pwr wires, otherwise the only field in the dw to trip to breaker is a mtr dead shorted to ground. if that is the case you may want to by a new dw because not to many techs enjoy working on ASKO PRODUCTS or are they certified to do so. so it maybe difficult to get a service company to even look at it and if they do and the mtr is the issue you will be looking at a expensive repair. good luck

Posted on Jun 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drain pump small black insert, found in the sump area. Where can I find one of these for my ASKO D1706 Dishwasher?


call asko directly, or call Great Plains Appliance Parts. Don't know the numbers, but Asko stocks parts in Texas, and Great Plains stocks them in Denver.

Aug 29, 2013 | Asko D1706 Built-in Dishwasher

1 Answer

Asko D1706 - filter is stuck we can't remove it...any suggestion???


Try a few drops of liquid wrench on it, wait half an hour and try turning counter clockwise again.

Jan 10, 2013 | Asko D1706 Built-in Dishwasher

1 Answer

Asko d1706- drain pump keeps running at the end of the cycle, even in the Off position. Water sometimes remains in the bottom of unit. Any clue


There was a small leak when I re-installed the pump causing water to accumaulate in the base. By reading on your site, I realized that this is normal and expected, for the event that a leak occurs, the pump stays on to purge all possible water.

Thank you

Dec 23, 2009 | Asko D1706 Built-in Dishwasher

1 Answer

Machine won't shut off when done


You didn't describe what the dishwasher is doing. If it is the drain pump running continuously, check this problem/solution.

Dec 23, 2008 | Asko D1706 Built-in Dishwasher

2 Answers

Asko D1706


I live in Australia, My one had the same problem, I found them in e-Bay.

Jul 06, 2008 | Asko D1706 Built-in Dishwasher

1 Answer

Asko D1706 No water in the sprinklers


You can get access to the base from behind the dishwasher ,you will find about 6 screws to remove the back panel at the bottom to see if its leaking.

Feb 17, 2008 | Asko D1706 Built-in Dishwasher

2 Answers

ASKO D1706 ... where is the control temp. for element for more dryer ?


you cant ajust the temp its thermostat control,if you want it to dry at end of cycle use rinse aid and open the door at end of cycle to let the steam out.you only have a 55 or 65 wash button on right side next to timer knob.

Feb 03, 2008 | Asko D1706 Built-in Dishwasher

Not finding what you are looking for?
Asko D1706 Built-in Dishwasher Logo

Related Topics:

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Asko Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

John Tripp
John Tripp

Level 3 Expert

4632 Answers

Are you an Asko Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...