Question about MPC Computers TransPort T2300 Notebook

1 Answer

My T2300 wont boot up,I was trying to take a memory card out of the slot and the AC power outlet came out and the laptop came off. Now it wont boot up

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Try removing the battery from the base. There is a sliding switch that will unlock it for easy removal.
make sure there is no power coming to the laptop.
Press and hold the power button for 5 seconds.*This should drain static from the motherboard
plug JUST the power cord back in.*To prevent any battery issues messing everything up
Press the power button.
If it boots you can put the battery back in.
* On my posts, i will try to explain what everything does for people who want to know

Posted on Nov 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My laptop wont switch on


When you plug in the power cord is there any lightswhatsoever on the laptop, where the plug goes in or on the AC Adapter of thepower cord?

When you press the power button do you hear fans running, hard drive spinning,lights on the computer, hear any beeps or lights constantly blinking, hear theDvD/CD drive click and the light on the drawer of the DvD/CD turn on for asecond or two? If so the laptop is trying to boot or may have booted, butthe screen is not showing for some reason.

Beep tones and blinking lights tells the technicians what is going on with thelaptop and why it is not booting. Most times it's a motherboard issuewhen you hear beeps or blinking lights continuous. Most times the problemis with the memory or Video Card. Count the Blinking Lights or Beeps and takenote of their pattern (1 Long or 1 Long followed by 2 Short).

Maybe your power cord is bad if you don't get anything to happen whatsoeverwhen you press the power button. And if that's true maybe you wasoperating off the battery the last time you had it on and since the power cordis bad, it was not charging the battery so the battery is drained and the powercord is bad.

Maybe you have a Static Charge Buildup. Remove the Power Cord, Remove theBattery, then Press and Hold the power button for 30seconds. After 30 seconds plug the power cord back in (leave the batteryout) and hit the power button to see if it boots. If it does, you can putthe battery back in and let it charge.Maybe your DC Power Jack which is where the power cord plugsinto the computer is bad. Take an ink pen and push the tip inside thejack and see if the little pin wiggles, if so the jack is bad. You'll have totake the laptop apart to fix it. Most times it is soldered onto themotherboard, so you will have to desolder the old and solder a new one.Maybe your memory is bad or the memory slot is bad.Remove the Power Cord, Remove the Battery, Remove the cover that houses the memory on the bottom of the laptop then remove one of thememory chips. Set the chip aside then try rebooting the computer. If it boots, then you know the memory chip you set aside is bad so mark an x onit with an ink pen. If it fails to boot then move the chip to the nextmemory slot and try rebooting. If it fails take the chip out and set itaside, then put the other chip in and try booting it in both slots. If itboots, just to verify that the chip set aside is bad, mark an x on it and putit into the open memory chip slot and try booting.

Jun 05, 2012 | Computers & Internet

1 Answer

My medion desktop model pc mt 14 wont switch on from the mains


Whenyou plug in the power cord is there any lights whatsoever on the laptop, wherethe plug goes in or on the AC Adapter of the power cord?

When you press the power button do you hear fans running, hard drive spinning,lights on the computer, hear any beeps or lights constantly blinking, hear theDvD/CD drive click and the light on the drawer of the DvD/CD turn on for asecond or two? If so the laptop is trying to boot or may have booted, butthe screen is not showing for some reason.

Beep tones and blinking lights tells the technicians what is going on with thelaptop and why it is not booting. Most times it's a motherboard issuewhen you hear beeps or blinking lights continuous. Most times the problemis with the memory or Video Card. Count the Blinking Lights or Beeps and takenote of their pattern (1 Long or 1 Long followed by 2 Short).

Maybe your power cord is bad if you don't get anything to happen whatsoeverwhen you press the power button.

Maybe you have a Static Charge Buildup. Remove the Power Cord, then Pressand Hold the power button for 30 seconds. After 30 seconds plug the powercord back in and hit the power button to see if it boots.

Maybeyour memory is bad or the memory slot is bad.Removethe Power Cord, Open the Case and remove one of the memory chips. Set thechip aside then try rebooting the computer. If it boots, then you knowthe memory chip you set aside is bad so mark an x on it with an ink pen. If it fails to boot then move the chip to the next memory slot and tryrebooting. If it fails take the chip out and set it aside, then put theother chip in and try booting it in both slots. If it boots, just toverify that the chip set aside is bad, mark an x on it and put it into the openmemory chip slot and try booting.
Maybeyour power supply is bad. Sometimes there is enough power to make thepower light come on but not enough power to make the fan turn on or harddrive spin.

May 27, 2012 | Medion Computers & Internet

1 Answer

Compaq presario v6101us wont boot not even start up screen


Remove the Power Cord, Open the Case and remove one of thememory chips. Set the chip aside then try rebooting the computer. If it boots, then you know the memory chip you set aside is bad so mark an x onit with an ink pen. If it fails to boot then move the chip to the nextmemory slot and try rebooting. If it fails take the chip out and set itaside, then put the other chip in and try booting it in both slots. If itboots, just to verify that the chip set aside is bad, mark an x on it and putit into the open memory chip slot and try booting.Maybe your video card is bad.

Apr 09, 2012 | Computers & Internet

2 Answers

My toshiba satellite l305d laptop does not boot,screen is blank,fan spins,hdd led does not blink,wlan led does not display,dvd rom light blinks,power led is on


If the power LED lights up it indicates that the laptop is getting power from the AC adapter. Most likely there is nothing wrong with the adapter but just in case test it with a voltmeter to make sure the output voltage is correct.
Also try this. Unplug the AC adapter, remove the battery and wait for 1-2 minutes. After that plug the AC adapter ans try starting the laptop again. Sometimes this trick helps.
It also could be a memory related problem. Try reseating the memory module, just remove it from the slot on the motherboard and install it back. Try installing the memory module into the other slot (if it's available). If you have two memory modules installed, try removing them one by one and start the laptop just with one memory module installed.
If the laptop starts fine with one memory module in both slots, but will not start with the second memory module in both slots, the second memory module is faulty. Replace the module.
If the laptop starts fine with both memory modules when they are installed in the slot A, but will not start with both memory modules installed in the slot B, the slot B is faulty and you'll have to replace the motherboard or use only one memory slot.

hopeyour problem solved

if you find this is helpful for you so please rate me this will encourage me todo more free work..
regards'
sandy

Sep 05, 2011 | Computers & Internet

1 Answer

It wont turn on all it said is loding os image


An AC power adapter and a battery work together to serve as the power supply of a notebook computer. Whenever you connect a power adapter into a laptop's power port, it supplies enough power to the battery for you to boot the operating system, run programs and perform computing tasks.

1. Turn on the laptop. If it does not power on, the battery may need to be charged. Connect the two ends of the AC adapter into the notebook's power port and a power outlet. Ensure that the power outlet into which the AC adapter is connected is active. Try plugging the power adapter into another wall outlet if the first outlet you try is not generating power.

2. See if the LED power light goes up. If it does but the laptop still does not power on, reseat the battery. Open the battery compartment at the back of the laptop and remove the battery. Wipe the gold contacts of the battery as well as the battery contacts of your laptop. Place the battery back into the slot and ensure that it is properly seated.

3. Remove all unnecessary peripherals if the laptop still does not power on; these may include external hard drives, flash drives and card readers. Turn on the laptop once again and see if it powers on successfully.

4. Use another battery or another AC adapter. If using another battery or another AC power adapter solves the problem, then the issue is with the battery or the AC adapter that you were using. Replace whichever item is malfunctioning. If this still does not remedy the issue, then the issue may be with the laptop's power port or the laptop may be malfunctioning. Seek help with a professional if this is the case.

I hope you find it very helpful. Best regards.

Aug 17, 2011 | Sylvania G-Netbook

1 Answer

Laptop Toshiba Satellite A200 Model No. PSAF6A-02C01N fail boot


Try removing / swapping / reseating the memory.

Try booting with one stick only, if the top slot doesn't work, try booting the bottom slot. Try both sticks.

Let me know what happens.

Apr 04, 2010 | Toshiba Satellite A200-0ET00X Notebook

4 Answers

Powering On Issues


With the power not staying on, its a motherboard problem. Try another ac adapter just to be sure just to rule out a faulty ac adaptor.

Mar 31, 2009 | Gateway M-6750 Notebook

1 Answer

Boot problems with Acer Aspire 3610


do you have power ? if no, check your power outlet and ac adapter first, if both of them are ok, it could be your motherboard.
if you have power but no display, this is called no post.
reseat your memory. if still not working, use 1 memory and try to put it in different ram slot. and if this is still not working, your motherboard is bad

Jul 26, 2008 | Acer Aspire 3610 Notebook

1 Answer

Hp 530 notebook cpu upgrade


It's not posible to upgrade to a dual core, the motherboard is a different design. Keep in mind that the processor, motherboard and memory have a matched frequency. If the processor doesn't match the board then it won't recognize it. Since the board does recognize the T2300, it may be that you need to match the memory in order to get it to boot. Match the memory by going to patriotmem.com and entering the model that the T2300 came from, it will tell you the memory frequency. If the memory matches the processor simply will not work with that board.

Jun 25, 2008 | HP 530 Notebook PC

2 Answers

Resource Conflict - PCI Network Controller in Slot 02


check for an update of bios on acer.com it will fix your laptop problem....

Apr 24, 2008 | Acer Aspire 5600 Series 5630-6951 Laptop

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top MPC Computers Computers & Internet Experts

Lee Durbin
Lee Durbin

Level 3 Expert

408 Answers

Bee Santiago

Level 2 Expert

268 Answers

rey francis basa
rey francis basa

Level 3 Expert

666 Answers

Are you a MPC Computers Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...