Question about Kitchen Ranges

2 Answers

EO F2 code

Cooking and the EO F2 code came on and oven stopped cooking Kenmove stove model 665.92012102, displays EO F2 and beeps about three times. Doesn't affect the burners or oven

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with my stove. The computer board gets shorted out and has to be replaced. If you have any bugs in the house-they love the control board. Roached especially love to short it out.

Posted on Oct 21, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

THIS IS GENERALLY A BAD ELECTRONIC RANGE CONTROL OR ERC BOARD

Posted on Jun 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After cooking my whirlpool Electric Range started to beep and shows EO F2. The range top is working ( and range top controls ) but the oven won't shut off and the controls are not working for the oven.


Hello,

Here is what my online service manual for the F2-EO error code says


F2 - E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock)


I hope this helps

Gene

Aug 01, 2011 | Whirlpool Kitchen Ranges

1 Answer

I can't find my model number on my Sears Kenmore Gas stove. Several times now the stove has beeped then kicked out with EO and F2 showing in the clock area. The stove was bought in 2000 or 1999. Can you...


Hi,

The tag with the model number is usually located on the rail that is visible with the lower drawer open.

The code you are getting is an indication that the oven got too hot or the control thinks the oven got too hot. It is usually do to one of two parts that have failed.

If the oven did not get too hot and you got the failure code, then the sensor would be bad.

If the oven did get too hot then the ERC (electronic range control) is bad.

May 17, 2010 | Kenmore 75012 / 75014 Gas Kitchen Range

1 Answer

My roper range model 2496XOA is beeping a F1Code. Not sure how to fix.


F0 Defective ERC Replace ERC
F1 Defective ERC Replace ERC
F2 Oven over heat Replace defective Sensor
F3 Oven Sensor Open Check/Replace Sensor
F4 Shorted wire or Sensor locate short and correct it or replace Sensor
F5 Defective ERC Replace ERC
F6 Problem with time keeping circuit Reset Time or cooking operation and check for proper ground
F7 Shorted or sticking button Clean button or replace ERC
F8 Defective ERC Replace ERC
F9 Door Latch Error Check latch and latch circuit

Generic stove manual

Feb 15, 2010 | Kitchen Ranges

2 Answers

I have lost my manual for a Simpson Appolo Atlas Stove


call manufactuerer and ask if you can order one or try to do so online

Dec 22, 2009 | Stoves EC500DOA Electric Kitchen Range

1 Answer

EO F2 code


hi, this appears to be a fault caused by a short in your keypad - electronic range control (ERC)

this needs to be replaced unfortunatly.

To assist you finding the proper part your model numbel means that the oven is manufactured by Whirlpool for Sears/kenmore.

Oct 24, 2008 | Kitchen Ranges

1 Answer

Jenn-air shut off while cooking giving f9 code


code F9 keeps flashing when I attempt to turn on my oven. What does this mean?

Sep 03, 2008 | Jenn-Air JES9800A Electric Kitchen Range

5 Answers

Maytag Gemini Electric stove fault code F 1-2 when using the oven(s)


F1-2 Runaway Cook Lower Oven Check the sensor 1050-1100
ohms, wiring, control

F1-8 Keypad Shorted Replace Control

Here is the link for you to print off the service manual on your range
http://www.servicematters.com/maytag_library/docs/16010107.pdf

PLZ Rate my service

Feb 17, 2008 | Maytag MER6772 Gemini Electric Kitchen...

2 Answers

EO F2 code


F2 E0 code is attributed to a short keypad with the Electronic Range Control (ERC). The recommended solution is to replace the ERC. If you can post back with comments I can locate a part number for you if you can give me the complete model number of your range (located along the opening around the oven door or lower drawer assembly). The model number includes a three-digit prefix. I would also need this to determine the manufacturer. This way I can research to find a part number and price and see if this is a repair you would wish to pursue. ERCs can be expensive on some models. I hope this helps you.

Nov 11, 2007 | Kenmore 95822 / 95824 / 95829 Electric...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

1,014 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

paulcarew

Level 3 Expert

2059 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...