Question about Konica Minolta bizhub 350 All-In-One Laser Printer
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Pick set of software that matches your OS, such as windows XP.
Follow install instructions and the printer will show up in your PRINTERS AND FAXES control panel. You can then go into that and set the options you may have, such as the stapler/booklet maker.
You will need to know the printers IP address, such as 18.104.22.168
prior to running installer.
Posted on Mar 15, 2010
Go to konicaminolta web site and download a mac driver. and install it to Imac. Make sure to download OS10.4 or higher.
Posted on Jul 09, 2009
SOURCE: c350 malfunction code c-0501
After replacing the fuser unit, if you got a c0501 code you must open the front door where the toner is. On the right side (hinge side) next to the black toner and drum unit there is a plastic pannel/cover. In the lower portion of that pannel there is a hole where a trouble reset switch is loacted. With a flashlight you may be able to see it. You are ment to use a thin screw driver or the like to push the button. You do this while the machein is on and desplaying the code. As soon as you press the button the copier will clear the code and start warming up. Thats it! If you are un certin of the button placement you can take out three screws from the pannel and loosen one screw from the pannel above it and and pull the pannel off the unit. You will see the board and it is the button on the (left), as there are two of them. Tho you only have access to the one thru the cover.
Posted on Oct 18, 2009
You have to have a fiery unit (external controler) to use the C350 With a Mac because the c350 dosnt come with appletalk in the software. IC-401 Is the model number of the controller you will need to connect the c350 to any kind of mac for printing / scanning.
Posted on Apr 29, 2010
Tips for a great answer:
Jul 08, 2015 | Konica Minolta Bizhub C350 Digital Copier,...
Jul 31, 2012 | Konica Minolta Bizhub C350 Digital Copier,...
May 21, 2010 | Konica Minolta bizhub 350 All-In-One Laser...
Mar 14, 2010 | Konica Minolta bizhub 350 All-In-One Laser...
Jan 14, 2010 | Konica Minolta bizhub 350 All-In-One Laser...
May 11, 2009 | Minolta C350 Printer
209 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 3 Expert
Level 2 Expert
Step 2: Please assign your manual to a product: