Question about Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

Yellow missing - will not print

Hi,
I have cleaned and deep cleaned via maintenance window many times but I still am not getting any yellow. It is a new cartridge as I thought the old one was a little low but still no yellow. What next?

Posted by on

1 Answer

Replace the printing head

Posted on Jun 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP Officejet 6310 will not print cyan


The Cyan print head nozzle maybe blocked.
If deep cleaning does not fix it then you need a new print head.
The cost of a new print head is expensive and it maybe better to get a new printer.

Oct 15, 2012 | HP Officejet 6310 All-In-One InkJet...

1 Answer

Yellow ink will not print


You may have blocked yellow print head nozzles.

Try the printer maintenance to clear the printer nozzles.
After several deep cleaning attempts and there is no improvements in the printthen a new print head is required.
A new print head maybe expensive and it maybe more cost effective to purchase anew printer.
The Print head will contain all the nozzels for all the different colors so you cannot just replace a single color print head nozzels.

May 22, 2012 | Canon Printers & Copiers

1 Answer

When I go to print everything looks good. The paper feeds through the printer but nothing prints on it.


Hi,

Welcome to FixYa.

This problem might be due to blockages in the print head nozzles or if a FINE Cartridge is empty.

Kindly try the print head cleaning function to remove any blockages in the print head nozzles.

The procedure for cleaning the print heads, in the printer driver setup window (The printer driver setup window can be displayed through the application software in use or the Start menu of the Windows), is as follows:

Cleaning:

1. Make sure that the printer is on and click Cleaning on the Maintenance tab.

Print head cleaning starts.

2. Click OK when the confirmation message appears.

3. Next, the Nozzle Check dialog box opens.

To check whether the print quality has improved, click Print Check Pattern. To cancel the check process, click Cancel.

If cleaning the head once does not resolve the problem, clean it once more.

Deep Cleaning:

Deep Cleaning is more thorough than Cleaning. Perform deep cleaning when two cleaning attempts do not resolve the print head problem.

1. On the Maintenance tab, click Deep Cleaning.

The Deep Cleaning dialog box opens. Follow the instruction shown in the dialog box.
Click Initial Check Items to display the items you need to check before performing Deep Cleaning.

2. Make sure that the printer is on and then click Execute.

Click OK when the confirmation message appears.
Print head deep cleaning starts.

If there is still no sign of improvement, the ink may have run out and the cartridges need to be replaced.

For more details, please download and install the complete on-screen manual from this link.

Thanks for using FixYa.

Dec 15, 2011 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Hi, (MX850) My blue ink has stopped printing. I




Performing Maintenance:




Note :
Be sure to install the ink tanks in the correct order indicated by the label on the Print Head Holder. The machine will not print if an ink tank is installed in the incorrect position.
Step 1
Printing the Nozzle Check Pattern.




If lines are missing or if white streaks appear


Step 2
Print Head Cleaning.

If the problem is not resolved after performing Print Head Cleaning twice


After cleaning the Print Head, print and examine the nozzle check pattern (Step 1) again.


Step 3
Print Head Deep Cleaning.



If Print Head Deep Cleaning does not resolve the problem, turn off the machine and perform another Print Head Deep Cleaning after 24 hours. If the problem is still not resolved and if you are sure that the ink didn't run out, then the Print Head may be damaged. Contact your Canon service representative.

Hope this helps.
All the best.

Mar 11, 2010 | Canon PIXMA MX850 Multifunction Printer

1 Answer

My MP530 willnot print black printed text. How do I now if the ink head is plugged and what do I do about it?


Hi ...

I would suggest you try and clean the print head and that should resolve the problem. Follow the below steps to clean the print head:

Perform a Cleaning of the print head:
Caution: Cleaning consumes a certain amount of ink. Perform Cleaning only when necessary.
Note: The pattern varies depending on the printer and version of Windows being used.
  1. Click 'Cleaning' to perform print head cleaning from the Pattern Check window and proceed to step 3 of the print head cleaning instructions. If the Pattern Check window is closed, skip this step and proceed to step 2.

    mp_500_win_nozzle_check_abnormal_cleaning.jpg


  2. To perform a print head cleaning from the Maintenance window, click 'Cleaning'.

    mp_500_win_maint_phc.jpg

  3. When the Print Head Cleaning window is displayed, select the target ink group for 'Cleaning'.


    Note: When performing Cleaning for all colors, check 'All Colors'.

    mp_500_ph_cleaning_all_colors.jpg


    Note: When performing Cleaning for Black only, deselect 'All Colors' and check 'Black'.

    mp_500_ph_cleaning_black_only.jpg


    Note: When performing Cleaning for Color only, deselect 'All Colors', and check 'Color'.

    mp_500_ph_cleaning_color_only.jpg

  4. After selecting the target ink group click 'Execute' to perform the cleaning of the print head nozzles.

    mp_500_ph_cleaning_execute.jpg

  5. When the confirming message is displayed, check the contents, and click 'OK'.


    Caution: Although the Nozzle Check window is displayed, do not perform any other operations until Cleaning is completed.. Cleaning will take about 40 seconds.


  6. Print a Nozzle Check Pattern and examine.

  7. Perform Cleaning again if necessary.


    Memo: If the pattern is still abnormal after two Cleanings, perform up to two Deep Cleanings.


Perform Deep Cleaning of the print head
Caution: Deep Cleaning consumes a larger amount of ink than normal Cleaning. Perform Deep Cleanings only when necessary.
  1. In the Maintenance window, click 'Deep Cleaning'.

    mp_500_win_maint_dphc.jpg


    Note: The layout varies depending on the printer and version of Windows you are using.

  2. When the Deep Cleaning window is displayed, select the target ink group for Deep Cleaning.

    mp_500_dph_cleaning_targets.jpg


    Note: When performing Cleaning for all colors, check 'All Colors'.

    mp_500_dph_cleaning_all_colors.jpg


    Note: When performing Cleaning for Black only, deselect 'All Colors' and check 'Black'.

    mp_500_dph_cleaning_black_only.jpg


    Note: When performing Cleaning for Color only, deselect 'All Colors', and check 'Color'.

    mp_500_dph_cleaning_color_only.jpg

  3. Click 'Execute'.

    mp_500_dph_cleaning_execute.jpg

    Memo: By clicking 'Initial Check Items' before clicking 'Print Check Pattern', you can see the specific confirmation items in Nozzle Check.

  4. When the confirming message is displayed, click 'OK'. (The Power lamp will blink green and Deep Cleaning starts. The blink stops when Deep Cleaning is over.)

  5. When Deep Cleaning starts, check the contents, and click 'OK'.


    Caution: To prevent interruption of the Deep Cleaning process, do not perform any other operations until Deep Cleaning is completed. When the operation of the printer is stopped, Deep Cleaning is completed. Deep Cleaning will take about 75 seconds.


  6. Print Nozzle Check again.


    Note: If the printed pattern is still not normal, perform steps 1 through 4 of the Deep Cleaning process one additional time.


    Caution: If after two Deep Cleanings the Nozzle Check Pattern is still not normal, turn the printer off and let it sit for 24 hours or more before attempting another Deep Cleaning again. The wait time may allow dried ink in clogged print head nozzles to liquefy, and resolve the problem
If this does not resolve the problem, please reply back and we'll try the next step ...

Don't forget to vote if this helps ... Cheers :)

Aug 01, 2009 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Printer doesn't pring


Try cleaning the printheads
Performing the printhead cleaning procedure
  1. Power on your printer, press and hold the "RESUME" button until the printer light flashes once.Note: You can also clean the printhead by clicking the Cleaning button in the Maintenance tab of the printer properties dialog box in Windows; or clicking Cleaning pull-down menu in the Printer Utilities dialog box on a Macintosh computer. Choosing this option will allow you to select all nozzles, black or just the colour nozzles.
  2. Pressing Resume on the printer will clean all nozzles. When the printhead cleaning begins, the POWER light starts flashing. This will continue for about 30 seconds. Wait for the light to stop flashing before you resume normal operation.3. Perform the Nozzle Check Pattern test again
  3. If the results are satisfactory, resume normal printing
  4. If the results are not satisfactory, you may need to execute a printhead deep cleaning.
Deep printhead cleaning from the operation panel
  1. To deep clean the printhead from the operation panel
  2. Press the Maintenance button.
  3. Press the Right Arrow button three times.
  4. Press the Print button. Printhead deep cleaning starts.
  5. When deep head cleaning ends, press the Maintenance button to exit.
Deep printhead cleaning in Windows
  1. Make sure the printer is turned on.
  2. Click Start, then Settings, then Printers.
    Note:Windows XP users: Click Start, select Control Panel, then Printers and Other Hardware, then Printers and Faxes.
  3. Right-click the Canon S820D Bubble Jet printer icon, then select Properties.
  4. Click the Maintenance tab, then click the Cleaning or Deep Cleaning button. The Maintenance tab and procedures may vary for Windows 2000 and Windows XP. Follow the instructions when prompted for those operating systems.
  5. For each message displayed, click OK. The BJ Status Monitor opens automatically and closes when the printhead cleaning is done. The POWER lamp on the printer flashes green during the cleaning process.

May 18, 2008 | Canon BubbleJet i560 InkJet Printer

1 Answer

Horizontal colored lines through grayscale printed photos


Hi George,

It sound's like an ink-feed issue:

1) Dirty heads, even after cleaning
2) No-ink or poor quality ink
3) Damaged head: some are part of the cartridge, some are not
4) Air bubbles in ink

The test page is typically not as hi-res nor as saturated as a
photo print. The hi-res photo puts the greatest demand on the print head.

The color lines you see are actually lines of missing color,
where the head has failed to deposit ink, so one or two primary
colors are missing from the complete picture.

For example missing yellow will make a blue line.
Missing magenta will make a green line
Missing cyan will make a red line.... etc..

Clean the heads again and again, print again and again,
hoping to flush the system.

BUT, keep in mind that cleaning wastes huge amounts of
ink and tiny little cartridges of ink cost more than many new printers.

Martin

Apr 24, 2008 | Canon PIXMA iP90 Mobile Printer

1 Answer

Color Printing Problem


Remove all ink cartridges and replace them securely in position.That may be the problem always.
Print nozzle check pattern.See for any missing patterns
Give a head cleaning
Again print nozzle check pattern.If it is ok leave it, other wise give a deep cleaning
  1. If the printed result does not improve even after doing print head deep cleaning, turn off the printer. Then, after 24 hours or later, do print head deep cleaning again. (After a given time interval, ink could dissolve itself, resulting in ink unclogging.)
  2. Atleast a multi colour( like your visiting card) page should be printed in a week time. other wise the ink may clog in the head.

Mar 29, 2008 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Canon i500


ur cardige has damged change the cardige of your printer & your printer problem will be solved

Feb 26, 2008 | Printers & Copiers

Not finding what you are looking for?
Canon PIXMA iP4000 InkJet Photo Printer Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

old marine
old marine

Level 3 Expert

1463 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...