Contol lock light on and washers not responding

Hello & Welcome to FixYa

This is a common issue with Whirlpool Duet washer however; your whirlpool duet washer needs a reset to resolve the control lock problem. Press and hold the END OF CYCLE/CYCLE SIGNAL button for 15 seconds to reset the control. Please get back to me if you have any other questions.

Kevin

Press and hold the end of cycle button for 15 seconds this should clear it.
Control locked

Hi,

Press and hold the End of Cycle Signal button for three seconds. This will turn off the Control Lock feature.

Thank you !!

Press any of the buttons on the control panel to see if the buttons are operational or check to see if the "Control Locked" indicator light is lit. If the control panel is operational, you may mistakenly lock the door.

Press and hold the "End of Cycle Signal" button for approximately three seconds until the "Control Locked" indicator light shuts off.

push and hold lock for 5 secs
if that does not work you may have a contol issue

To unlock the controls Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off.

Press & hold the 'end of cycle' button on the right side of panel for 3 seconds. Child lock button, you do the same thing again & it locks. You dont want kids bathing in the machine, no. Pl rate me nice.

book said to hold the end of cycle signal button for three seconds or when the control locked light goes out, good luck

press and hold the drain/spin button for 3 seconds.


tnx 4 using fixya,

drcool

to deactivate the control lock feature, press and hold drain/spin for 3 seconds.

goodluck.

tnx 4 using fixya,

drcool