Question about ASUS CUV-NT (CUVNTWOTVWOV) Motherboard

1 Answer

No display with any AGP card installed

Display is normal but slow with XP service pack 3 installed.
Previously had Nvidia GeForce Ti 4200 installed and working, but one day the screen stayed blank on startup. Display returned to normal when the AGP card was removed. I assumed the card was bad
I purchased an XFX PVT44AWANG GeForce 6200 256MB AGP 4X/8X
video card and installed it. Monitor stays in standby during attempted start.
Removal of card restores display.
BIOS is set to default to AGP if a card is installed.
I am assuming the motherbaord is faulty.
Have I missed something?

Posted by on

  • NONEATALL Jun 02, 2008

    I have already ordered a replacement motherboard. I am certain that the cards were compatible with 4X on the mobo. Memory is maxed at 768 MB.

    You have raised one possibility that I had not considered.

    That is a bad solder joint at one of the AGP socket pins.

    I have found cold solder joints on this board before at the pins of the monitor connector.

    I am an old hand at electronic troubleshooting-starting 1949-

    and my experience has been that the mechanical parts cause the most trouble in solid state assemblies.

    But computers are not my forte.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 49 Answers

Could be a myraid of issues actually. One option is that the motherboad IS faulty (Asus, MSI all see to face these issues). On the other hand, it could be due to a faulty video card port (still involving the motherboard though). The last option you might wanna consider, although most remote is your memory. Also, make sure that each of the video cards pruchased are of compatiable spces to your motherboard. Hope this helped. Thanks.

Posted on Jun 02, 2008

  • Rishi Dave Nair
    Rishi Dave Nair Jun 02, 2008

    Glad it helped. That is a possibility, so lets leave it to the manufacturer and see what they come up with. Good luck!



    -Technomancer

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows 7 Driver for Nvidia Geforce FX 5500 AGP display Card not compatible with win 7


display card not compatible or the drivers not compatible??

Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers

If your computer came with a motherboard disk the drivers could be on it or you might have to download one

http://majorgeeks.com/SiS_UniVGA5_Graphics_Driver_For_Windows_7_d6264.html This package consists of SiS VGA Drivers, AGP Drivers, VGA Utilities, and Installation for Windows 7. Utilities include Control Center and SiStray. The Control Center provide some settings like gamma correction, video, TV output, driver mode, screen rotate, and product information. The SiStray provide Control Center entery and some settings like resolution, refresh rate,and rotation. The Installation are capable of installing/uninstalling drivers and utilities respectively.
Supported Chipsets:
SiS671, SiS672, SiS671FX, SiS672FX, SiSM671, SiSM671MX, SiSM672, SiSM672MX hope this helps cnetdownload.com on the home page you should see the download software finder under that there will be a list platform, category sub category price from the category drop down list select drivers then from the price drop down list select free or which ever applies to your need

or

Windows 7 32 bit

http://download.cnet.com/nvidia-graphics-driver-windows/3000-2108_4-10630932.html
This is a WHQL release from the Release 260 family of drivers. This driver package supports GeForce 6, 7, 8, 9, 100, 200, 300, and 400-series desktop GPUs as well as ION desktop GPUs.
What's new in this version:

Adds support for the newly released GeForce GTX 590, GeForce GTX 560 Ti and GeForce GTX 550 Ti GPUs

Increases performance for GeForce 400 Series and 500 Series GPUs in several PC games vs. v266.58 WHQL drivers

Adds NVIDIA Update feature

Windows 7 64 bit

http://download.cnet.com/nvidia-graphics-driver-windows/3000-2108_4-10630939.html
This is a WHQL release from the Release 260 family of drivers. This driver package supports GeForce 6, 7, 8, 9, 100, 200, 300, and 400-series desktop GPUs as well as ION desktop GPUs.
What's new in this version:

Adds support for the newly released GeForce GTX 590, GeForce GTX 560 Ti and GeForce GTX 550 Ti GPUs

Increases performance for GeForce 400 Series and 500 Series GPUs in several PC games vs. v266.58 WHQL drivers

Adds NVIDIA Update feature
if these packages are not the right
http://download.cnet.com/2000-20_4.html
on the home page you should see a search tab just type in what you are looking for
(be precise)don

Sep 10, 2011 | Nvidia GeForce FX 5500 Video Card Graphic...

Tip

A list of compatible Graphics cards for an AGP8X Motherboard.


Due to text length contraits I've had to seperate AGP8X Graphics Cards from PCI Express Graphics Cards

Having trouble finding out exactly which Graphics card will work in your AGP8X motherboard? The following list displays all the compatible Graphics cards for an AGP8X motherboard in decending order (Top Graphics cards are faster than bottom ones in each catagory)

If your Motherboard supports AGP 8X then here is a list of compatible Nvidia cards.
GeForce 6 Series - (GeForce 6200, GeForce 6600GT, GeForce 6600 and GeForce 6600 LE)
GeForce FX Series - (GeForce FX 5950 Ultra, GeForce FX 5900 Ultra, GeForce FX 5900, GeForce FX 5900 XT, GeForce, GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5200 Ultra, GeForce FX 5200 and GeForce FX 5500)
GeForce 4 Series - (GeForce 4 Ti and GeForce 4 MX)GeForce 3 Series - (GeForce 3, GeForce 3 Ti 500 and GeForce 3 Ti 200)
GeForce 2 Series - (GeForce 2 Ultra, GeForce 2 Ti, GeForce 2 Pro, GeForce 2 GTS and GeForce 2 MX series)
GeForce 256 Series - (All)

If your Motherboard supports AGP 8X then here is a list of compatible ATI/AMD cards.
ATI Radeon X Series - (ATI Radeon X1050, ATI Radeon X1300, ATI Radeon X1550, ATI Radeon X1600 and ATI Radeon X1650)
ATI Radeon 9xxx Series - (ATI Radeon 9550)

For a list of compatible Nvidia PCI-Express cards for a PCI-Express Motherboard currently on the market click on the following link to take you to my other tips page. http://www.fixya.com/support/r6784358-list_compatible_nvidia_pci_express_16x

on Nov 10, 2010 | Computers & Internet

1 Answer

P4vm800m7, processor Intel we need VGA drivers t o downloads


http://download.cnet.com/%7Bvalue=http://www.download.com/msi-nvidia-based-graphics/3000-2108_4-10162298.html
Available in this download are the latest drivers for the following nVidia-based graphics boards: NVIDIA RIVA TNT, RIVA TNT2, RIVA TNT2 Pro, RIVA TNT2 Ultra, Vanta, Vanta LT, RIVA TNT2 Model 64, RIVA TNT2 Model 64 Pro, GeForce 256, GeForce DDR, Quadro, GeForce2 MX, GeForce2 MX 200, GeForce2 MX 400, Quadro2 MXR, Quadro2 EX, GeForce2 GTS, GeForce2 Pro, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 420, GeForce4 MX 440, GeForce4 MX 460, Quadro4 200NVS, Quadro4 400NVS, Quadro4 500XGL, Quadro4 550XGL, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4200, GeForce4 Ti 4400, GeForce4 Ti 4600, Quadro4 700XGL, Quadro4 750XGL, Quadro4 900XGL. The drivers now include support for AGP 8x. These drivers must be installed by a user with Windows 2000/XP Administrator privileges.

Jun 23, 2011 | Mercury P4VM800M7 Motherboard

1 Answer

Cant log on xp.


hi..if u want to run as good that VGA u need to set in the Bios as init fist display as AGP then find what AGP size appear on bios..if this all OK try to booting the system..thanks and Good Luck..^_^

May 11, 2009 | NVIDIA GeForce 5500 / 128MB DDR / AGP 8x /...

1 Answer

Nvidia 8600 GT Card not allowing resolution change


HEY BUDDY JUST USE YOUR PREVIOUS DRIVERS.I ALSO HAVE THE SAME PROBLEM WITH MY NVIDIA GEFORCE FX 5500 256MB.UPGRADE UR WINDOWS XP TO SERVICE PACK 3 AND THAN INSTALL THE DRIVER THAT WILL SOLVE THE PROBLEM>ALSO DONT FORGET TO RATE ME.

Apr 08, 2009 | XFX NVIDIA GeForce 8600 Graphics Card

1 Answer

Vga card installation


you have to check: if driver is right and no error during hardware and software install
1) go bios check the setting for AGP and biuld-in VGA, set to AGP slot enable
2) check your cpu speed, and power supply watt, it is under 350 is not siuitable for higher speed cpu plus GF6600, choose 400W or higher better. sometimes the power trouble is crucial
3) check your motherboard model to make sure the AGP slot which support GF6600
3) go windows check 6600 device status at control panel/ system/hardware manage/vedio card show right detail.

Dec 26, 2008 | Intel D102GGC2 Motherboard

1 Answer

Upgrade from a 64MB nVIVIA GeForce4 Ti4200 graphics card.


This card is really good for an AGP card. It had 512 mb of DDR2 memory.If you are using Photoshop You need to look at upgrading to the max amount you can get into you machine.Photoshop is built to use as much memory as you will allow. I think you can go to 3 gigabyte of standard DDR NOT DDR2. Also, XP has Service Pack 3 now so download that from Microsoft's site. Hope this helps.

http://www.newegg.com/Product/Product.aspx?Item=N82E16814102073

Dec 25, 2008 | Nvidia GeForce4 Ti 4200 128MB DDR AGP TV...

1 Answer

Geforce 5500 fx for agp ultra screen flickers


use the build in video card to install the AGP card drivers first and install the card and go into the bios and make sure its set to boot from the agp slot first not build in . Thanks

Nov 26, 2008 | Palit Microsystems GeForce FX5500, (256...

1 Answer

Display Drivers


If you right click on the wallpaper and go to the VC Conrol Center, you will see 2 vc, one with the normal resolution and other with 600x400 and 8 bits. This is perfectly normal

Aug 26, 2008 | Computers & Internet

2 Answers

No display with AGP card installed.


If one of the components are not porperly connected or has faluire...the system boot up is halted with some beeps...You need to check whether the RAMS a properly fixed...processor cooler can be losened...

PLEASE RATE ME AS "FIXYA" <blue boxes> for my help

Jun 02, 2008 | ASUS CUV-NT (CUVNTWOTVWOV) Motherboard

Not finding what you are looking for?
ASUS CUV-NT (CUVNTWOTVWOV) Motherboard Logo

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

David
David

Level 3 Expert

778 Answers

Tony

Level 3 Expert

2600 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...