Question about Intel Motherboard

1 Answer

Compaq Desktop Sr1520NX

Bought a Compaq desktop, SR1520NX, still in its original config. Talked to Compaq tech support and they told me I had 2 banks of mem, each with 2 slots. When I looked at it, WRONG. It only has 1 bank with 2 slots. I wnat to upgrade the mem. It takes PC3200 mem. Right now I have the original 512MB in it. What meme can I put in....pc3200 1gb?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Hi nordicwookie,
The main point here is to match the 512MB already installed into the PC. You can buy from either of these web sites. (Click on the link). This site offers free shipping.
http://www.techgiant.com/index.cfm?fuseaction=search.memorySearch2&model_id=53265
&
here.
http://shop.kingston.com/modelsinfo.asp?SysID=24218&mfr=HP%2FCompaq&model=Presario+SR1520NX&SUBMIT1=Find

You want 512MB of memory which will give you a total of 1GB.
Though a suggestion if I may. If you are going to run or are running Vista, suggest you go higher. 1.512GB. This is listed on the Kingston.com site. (This is only a suggestion).

Good Luck! nordicwookie
If this answered you're question, please vote fix.
If I can help you further, feel free to post here.
Mike

Posted on May 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to change my motherboard of my laptop. My laptop is Compaq Presario cq60-415ee w/ a product no. ny252ea. What will I buy? Thank U!


Changing motherboards on a laptop is not easy. You can only change the motherboard with exactly the same as what is installed originally because they are designed specifically for that laptop case.
Changing motherboards in a desktop case is a different matter because desktop cases have standard mountings for motherboard to suit different manufacturers.

Jun 15, 2011 | HP Compaq Motherboard

1 Answer

I want to reset my compaq desktop to its original settings from theday I bought it


Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) Hope this helps

Mar 11, 2011 | Motherboards

1 Answer

When on my system raise on tow beeb in our cpu


According to intel web site, 2 beeps indicate a memory failure.
look it:
http://www.intel.com/support/motherboards/desktop/sb/cs-010249.htm

You are getting 1, 2, or 3 beeps that indicate a memory failure.

1 beep - Refresh Error (with nothing on the screen and it is not a video problem)

2 beeps - Parity Error

3 beeps - Base 64 K memory failure

Solution:
  • Reseat the memory.
  • Make sure that the contacts on the memory and the socket are clean.
  • Try removing one bank of memory modules at a time. Note: Some systems might need to have a memory module in Bank 0.
  • Try using memory modules from the same manufacturer with the same part number and speed.
  • Check for a faulty memory module by trying the memory in a known good system.
  • Trying known good memory in the system.
  • Check the power supply and check for power fluctuations.
  • If the steps above do not resolve the problem, the desktop board may be defective. Try a different desktop board.

Dec 18, 2010 | Intel Motherboard

1 Answer

I recently bought ram for my compaq evo d510 sff, but my ram is not detected. as in the computer will not boot at all with the new ram. I borrowed ram from other desktops, and all of them work, one is...


here is what you should have. you cant mix mem types. you are suppose to have what is listed below. maximum amount is 2 gig. have to be pc2100 which is ddr-266


  • Compaq Evo D510 CMT 2GB Memory Ram Kit (2x1GB)
  • 2GB DDR-266 (PC2100) Kit (2x1GB
  • Oct 22, 2010 | Compaq System brd w tray for Evo D510 SFF...

    1 Answer

    I use a projector with my laptop when teaching school. Suddenly my projector will only display my desktop MINUS the icons. The mouse doesn't show and neither do anything I try to view like files or...


    Sounds like your projector was told to be an extended desktop, but not in the usual place, which is to the right of your original screen.
    One thing you might try, uninstalling and reinstalling the video card drivers if you can get them easily. Another thing is while your hooked up to the projector, if your using XP, is right click on the desktop, click Properties, Settings, then you should see 2 monitor icons. They should be side by side, if not make them side by side.
    You could also make the projector your primary monitor, this will focus it on your desktop as if you were using your laptop screen. You might try this first to see if it corrects your problem.

    Nov 06, 2009 | Motherboards

    1 Answer

    I hav window vista ultimate on my desktop having configation 160 gb hard drive, g 33 motherboard(intel original), 1 gb ram ang while i m loading window xp a error come and the screen turns to blue . PLZ...


    If at the top of this error it says 'IRQL_NOT_EQUAL_OR_LESS' it could be your graphics card or ram, try changing these and see what happens

    Apr 19, 2009 | Motherboards

    1 Answer

    Memory slot 0 is broken


    yes, you can use it. You shouldnt have to change anything. it is plug and play.

    Jun 10, 2008 | Intel Desktop Board D845GLAD Motherboard

    5 Answers

    Where do all the leads go?


    Hi there! I got given one of these MoBo's and, in a mad fit of generousity, told my daughter that I'd build her a PC for college using it! I found the MoBo tech reference guide on this page- http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=179911&taskId=115&prodTypeId=12454&prodSeriesId=96277 It's near the bottom of the page, with the text "Technical Reference Guide for Compaq Evo D300/D500 Personal Computers and W4000 Workstations Featuring Intel Pentium 4 Processors and the 845 Chipset" on the button! You will need page 6-11 for the Pin-Out details of the P5 connector. Hope that helps you out Wolfie

    Aug 30, 2007 | Compaq (252608-001) Motherboard

    Not finding what you are looking for?
    Intel Motherboard Logo

    Related Topics:

    44 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Intel Motherboards Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    Tony

    Level 3 Expert

    2598 Answers

    joecoolvette
    joecoolvette

    Level 3 Expert

    5660 Answers

    Are you an Intel Motherboard Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...