- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Use the code search provision of your universal remote to seek a suitable code. If a search through all codes stored in the remote fails, you may have to try a different universal remote. All universal remotes do not store all possible codes.
Press the eject button on your Toshiba DVD and insert the foreign disc. A window will pop up informing you that your DVD is a different region and ask you if you would like to convert to this region.
Click "Yes" when you are prompted to change the region. You will only have a certain number of opportunities to change your region. On the last try, your DVD will only play DVDs from the designated region.
Find out the Toshiba model number and use this to research a code that will break the region code assigned to your player. Each player make and model possesses a unique code to break the region code, so make sure you are using the correct one and follow it exactly as it is written.
Problem solved. I decided to use the learning function of my remote to learn the wanted commands of the original remote. The remote I used was a Sony RM-VL610 which could learn the original remotes functions easy and quickly. This is a very good remote for only $30 purchased at Target. The Macro commands were also entered rather easily. I did not try this method originally,because I thought it would be too time consuming and difficult. pcwg
The remote control for your DVR has the capability to control 2
additional DVRs in addition to the one that you currently have. In
order for the remote control to work with your DVR, you will need to
make certain both of them are talking on the same frequency. If you
press the remote control and the front of your unit says DR2, that
means that you need to have your remote on DR2 as well so that it can
operate the DVR. To set your remote to DR2, you will need to make sure
the unit is off then you will need to press and hold down the SETUP
button and while you are holding this button down, press the number 2
button. Your remote is now set to DR2.