FIXED, I managed to fix my copperhead last night after its been sat
under my desk for the past 4 months with doubleclick problem. I peeled
off the lower slider foot, removed the QC sticker off the screw,
removed the screw and took the top off the mouse. inside, under the
faulty button (left mouse button for me) there is a little black box
with a small thin white button on top. i very carefully lifted the
black box slightly off its connection with a small flathead screwdriver
then pushed it back down again. i did this with the mouse plugged in to
usb blue lights on and everything. it stopped double clicking
instantly, hope this works for anyone else. let me know.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello, if the mouse is double clicking randomly means the mouse button or button soldering are broken, maybe you might want to try opening it up and resoldering the mouse button, if it doesn't work you can use an old mouse button that fits the space and solder that one in the mouse that's having problems, reassemble and see if it works, the good news is that most of the time it does.
I believe the switch inside the left mouse button has worn out or broken that made you think after pressing 4 times you were able to trigger the switch and make the mouse to work. You may open your mouse carefully to see if this is the case. If not please follow the below steps as you might need to configure the mouse double click speed.
Open control panel>Double click on the mouse icon>Button Tab>Double Click section>Adjust your double click speed.
I had the exact same problem with my original Logitech wireless mouse that came with a wireless keyboard. I eventually figured that the button component inside the mouse wasn't making consistent contact causing unintended double clicking or dropping while dragging.
I fixed it by doing some soldering to switch the left mouse button with the right mouse button, since I didn't have to use double clicking or dragging with the right mouse button. It worked pretty well for several months until the switched left button started showing the same problem again.
Now my newer Logitech mouse (it's more expensive Nano wireless mouse) is having the same problem after about 1 year using it. I think there's a serious durability problem with the button component that Logitech is putting on their mice. I may do the same trick again on this mouse, but now I don't consider Logitech as a good mouse manufacturer anymore. They used to make good quality hardwares but I guess they aren't that good anymore with all those cheap Chinese suppliers for their parts. :(
ok. i see your having great time using that mouse and you cared that device for several years. Try open your mouse and carefully remove these buttons of your mouse to clean those dirty stuff stacked on those linings( I believe that you haven't done this before, right?). I believe that this will need to clean a bit to give it back on track again.
DID YOU TRY SWITCHING YOUR BUTTON ASSIGHNMENT (LOCATED IN MOUSE OPTIONS IN CONTROL PANEL) TO SEE IF IT HAPPENS ON BOTH RIGHT AND LEFT BUTTONS???
ALSO MAKE SURE YOUR SENDING UNIT IS NO FARTHER THAN A COUPLE FEET FROM YOUR MOUSE.