Question about Kia Vehicle Parts & Accessories

Open Question

I have an Astrostart remote starter model 903. my remote has stopped working properly, it works sometimes, then won't, meaning it won't even light up. Put new batteries in it, does same thing. bought a another remote on ebay, it does the same thing. It won't even light up. What's wrong with these things? I got it programmed when it worked but then it won't even light up when a button is pushed. 2 remotes with same problem, something is wrong here.Cant' get any help from the company either.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: Remote stopped working

http://www.fixya.com/support/t320518-bose_321

Posted on Jan 13, 2008

Agent Dort
  • 216 Answers

SOURCE: setting up 2nd wii remote

Greetings mlsaenz7,

You need to resynch the second remote to the Wii console. To accomplish this you need to hit the sync button under the battery cover on the remote, and then when the lights are flashing on the remote, you hit the sync button on the Wii. The synch button is located under the small cover to the left of the cd/dvd slot.
Thank you,

Dort
Go Ahead. Use Us.

Posted on Apr 21, 2008

  • 1 Answer

SOURCE: 2007 jeep wrangler sahara with a mopar remote starter just beeps

That's not a remote starter on your key chain, it's a keyless entry for an alarm system.

Posted on Dec 17, 2008

blueextc3221
  • 15935 Answers

SOURCE: remote start doesn't always work

It is that way because you wouldnt want the car starting when you have it it in your pocket or purse.
Sounds like the keypad contacts may need cleaning, or have been bent/broken/etc.
Have you tried another (backup) keyfob?
Please do this and report back.
If you are having problems, the installer should troubleshoot for you for free.

Posted on Jan 14, 2009

ktkodama
  • 37 Answers

SOURCE: Remote does not open garage door

It sounds like the wall button has the lock feature engauged.

Is there a small green LED flashing inside the wall button?
Push and hold the lock button for about two seconds and the LED should stop flashing. This will unlock the garage door opener and your remotes should start working. You may have to reprogram your remotes and homelink again since you triedprograming in the lock mode.

Good luck.

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Astrostart hst5224, It will star then immediately shut off. My jeep is A manual transmission


[PDF]MODEL RSS-5225 - DirectedDealers.com

www.directeddealers.com/manuals/OG/Astrostart/RSS-5225_OG-Eng.pdf
Immediately report any malfunction to the AstroStart dealer that performed the ... Always turn off the main switch when not using the remote starter for .... The startmodule will inform you of the status of door locks, the alarm and of the engine. .... If the trunk is opened for more than 5 minutes, the system switches to the.

How do you reprogram an AstroStart remote HST5224

www.answers.com > Wiki Answers > Categories > Cars & Vehicles
In order to reprogram an AstroStart HST5224 remote, you must putthe key in the ignition ... lamp) b, press and hold UNLOCK button, after 1 second key LED will flash once c, .... C. Turn the ignition to ON (Do NOT Start) then back to OFF. ... B.Immediately after letting go of the lock and unlock buttons, press the lock button by ..

Nov 24, 2015 | 2007 Jeep Wrangler Unlimited Rubicon 2...

1 Answer

Astrostart troubleshooting


Remote start devices rely on the vehicle being in a particular position or "state" before they will be able to engage the starter. Typical things checked is the gear shift position (park or neutral?), engine already running?, door locked? and more. If any one of these checks finds that it is in the wrong position or state, it will not engage the starter. Remember, even if the door is properly locked, or the transmission is in park, etc. one of the several switches that the remote start device checks may be damaged or faulty.

If you can't see something obviously wrong, you'll probably need to return to the installer to repair / adjustment.

Good luck!

Feb 20, 2014 | Vehicle Parts & Accessories

2 Answers

Disconnected battery in 2007 gmc Yukon. Dash lights and radio work. Engine won't crank. Remote won't work. How to reset?????


kindly pls check the BCM which is located under the left side of the dashboared i hope that will help.

Mar 30, 2013 | 2007 GMC Yukon

2 Answers

Astrostart won't start the car


You may need to reset the system.

SEQUENCE ACTIVATED BY THE PARKING BRAKE .
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply the parking brake Once Twice
Note: The system can be set - at time of installation - to require that the parking brake be applied once or twice.
If set for two actuations, pause one second between the two.
4. Remove key from ignition (the system keeps the engine running).
5. Exit the vehicle.
6. Within 60 seconds, close all doors.
7. The system will stop the engine and blink the parking brakes once to confirm the sequence is valid (vehicle is
ready for a remote start command).
SEQUENCE ACTIVATED BY THE REMOTE CONTROL
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply parking brake.
4. Send the start command (Model 801 & 2101 - Model 903 ).
5. Remove key from ignition (the system keeps the engine running).
6. Exit the vehicle.
7. Using the remote, send the STOP command. The system will stop the engine and parking lights will blink once
to confirm that the sequence is valid (vehicle is ready for a remote start command).
http://www.astrostart.com/Support/Guides.aspx

Nov 27, 2012 | Cars & Trucks

2 Answers

Logik remote control won't work


It sound that your remote control need serivce. In most cases, claning it will rectfy the problem. You can get more details about how to reapair,test or clean the remote control by entering this site "Electro-help". Search for it in Google.

May 02, 2012 | Televison & Video

2 Answers

I have a Command Start remote starter and the remote is worn out and buttons are terrible where can a person get a replacement remote but I dont know model number as there is no markings on remote it was...


Command Start was an AstroStart brand, you need to find a dealer in order to get a replacement remote. They do not sell via the internet. The following link will assist you in finding a dealer near you.

AstroStart dealer locator

Nov 12, 2010 | AutoCommand Remote Car Starter Add-On

Not finding what you are looking for?
Vehicle Parts & Accessories Logo

Related Topics:

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Vehicle Parts & Accessories Experts

Thomas Perkins
Thomas Perkins

Level 3 Expert

14185 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

Are you a Kia Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...