Question about Kenmore 24 in. 17032 Built-in Dishwasher

1 Answer

Dw stopped in midcycle.

Kenmore ultrawash stopped in midcycle. have power but no lights. door switch ok. what to check next?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 413 Answers

There is a thermal fuse located on the electronic control board housing that may have failed.This replaceable part (gray or white) is clipped on to the side of the housing.

Posted on Jun 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore ultrawash diswaher model 665.1374 cycle and options buttons light up but start button does not light and diswaher does not start. please help


Check that the door is closing all the way and that the latch isn't damaged or bent. It sounds like a door switch issue.

Apr 04, 2015 | Kenmore Dishwashers

1 Answer

Samsung DMT400RHS Leakage error


check you house circuit breakers if you have no lights and the DW is plugged in next check to see that the door switch still locks the DW shut otherwise;call a serviceman

Nov 18, 2013 | Samsung DMR78AHS Builtin Dishwasher

1 Answer

My kenmore ultrawash lost power out of nowhere model 665


see the causes:
Power from the house
c.breaker tripped reset, or blown fuse replace
Door switch
test for open or defective, since this switch close the relais for start the m.motor see the diagram
Wiring
test for open, break, or burn or loose and repair
Timer or selector switch
test for open or defective, or dirty. clean and repair or replace see the diagram attached.

God bless you

6_19_2012_9_41_13_am.gif

Jun 18, 2012 | Kenmore Dishwashers

1 Answer

Kenmore Elite Ultrawash, possibly 11 years old, 665.155962990 toxic burning smell pumps and electricity work reading reviews for new dw's inclines me to want to have a repairman try - if the...


If you have a belt on this machine, I would change it. If the tub bearings are worn, then the motor will spin the belt faster then the tub/drum can turn causing burning. Worn pump or tub bearings can also cause this smell. Make sure pump is clean and tight.

Dec 31, 2010 | Kenmore Dishwashers

2 Answers

I need the reset button sequence for a Kenmore Ultrawash automatic dishwasher Model # it is 665-15772990. My daughter was playing with all the lights and the only thing it will do now is drain.


I had the same problem and this fixed it:

- To clear the flashing light you will have to reset the console. Do this by closing the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

Jun 14, 2009 | Kenmore 24 in. 17032 Built-in Dishwasher

1 Answer

Bosch SHX46A (6 years old) Selected regular cycle, pressed On and closed door. Cycle did not start normally. Pump runs, but no water is coming into the DW. I confirmed the water supply line is turned on....


From your description, I doubt that the problem is door latch is the cause.
The first thing that a modern dishwasher does before it begins to fill with water is run the drain pump.  It appears that this DW is not progressing to the next cycle (inlet water) and because the pump runs even when the door is open, I agree that the controller card may have failed.
If possible, inspect all the wire connections (remove main power before you do this) ... if there is a loose connection, the controller could do odd things.
Good Luck!  Please report back what you find, OK?

Apr 14, 2009 | Bosch Integra® 500 SHX46A0 Dishwasher

1 Answer

Kenmore Elite DW Water in bottom of unit and control panel not working @ all


happy new year,,ok easyas we go..first we must know if we have electricity,,,you must check at connection box under dishwasher,,,next we want to check or ,,door switch.....weel after that if it did not start,,im here...onthejob

Dec 31, 2008 | Kenmore 24 in. 17482 / 17484 / 17489...

1 Answer

Diswasher wont turn back on after being moved - DW Omega 908


Have you checked the door interlock switch to make sure it is not disabling the wash cycle?

Sep 01, 2008 | Dishwashers

Not finding what you are looking for?
Kenmore 24 in. 17032 Built-in Dishwasher Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Fred Sops

Level 2 Expert

271 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Raisin Brann

Level 1 Expert

28 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...