Question about Microsoft Computers & Internet

3 Answers

How to create a bootable Windows XP SP1 CD - Microsoft Computers & Internet

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,574 Answers

Using nero .
Step 1
Create 3 folders - C:\WINXPSP1, C:\SP1106 and C:\XPBOOT
Step 2
Copy the entire Windows XP CD into folder C:\WINXPSP1
Step 3
You will have to download the SP1 Update, which is 133MB.
Rename the Service Pack file to XP-SP1.EXE
Extract the Service Pack from the Run Dialog using the command:
C:\XP-SP1.EXE -U -X:C:\SP1106
Step 4
Open Start/Run... and type the command:
C:\SP1106\update\update.exe -s:C:\WINXPSP1
Click OK
Folder C:\WINXPSP1 contains: Windows XP SP1

How to Create a Windows XP SP1 CD Bootable
Step 1
Download xpboot.zip
Code:
Code:
http://thro.port5.com/xpboot.zip
( no download manager !! )
Extract xpboot.zip file (xpboot.bin) in to the folder C:\XPBOOT
Step 2
Start Nero - Burning Rom.
Select File > New... from the menu.
1.) Select CD-ROM (Boot)
2.) Select Image file from Source of boot image data
3.) Set Kind of emulation: to No Emulation
4.) Set Load segment of sectors (hex!): to 07C0
5.) Set Number of loaded sectors: to 4
6.) Press the Browse... button

Step 3
Select All Files (*.*) from File of type:
Locate boot.bin in the folder C:\XPBOOT
Step 4
Click ISO tab
Set File-/Directory length to ISO Level 1 (Max. of 11 = 8 + 3 chars)
Set Format to Mode 1
Set Character Set to ISO 9660
Check all Relax ISO Restrictions


Step 5
Click Label Tab
Select ISO9660 from the drop down box.
Enter the Volume Label as WB2PFRE_EN
Enter the System Identifier as WB2PFRE_EN
Enter the Volume Set as WB2PFRE_EN
Enter the Publisher as MICROSOFT CORPORATION
Enter the Data Preparer as MICROSOFT CORPORATION
Enter the Application as WB2PFRE_EN
* For Windows XP Professional OEM substitute WB2PFRE_EN with WXPOEM_EN
* For Windows XP Home OEM substitute WB2PFRE_EN with WXHOEM_EN
Step 6
Click Burn tab
Check Write
Check Finalize CD (No further writing possible!)
Set Write Method to Disk-At-Once
Press New button
Step 7
Locate the folder C:\WINXPSP1
Select everything in the folder and drag it to the ISO compilation panel.
Click the Write CD Dialog button.

Posted on Oct 11, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Microsoft Master
  • 118 Answers

You can easily create bootable CD of Windows Xp in Windows 7 Operating System.
If you have bootable Windows Xp image then you just need to enter an empty CD into CD-Drive and double click on img file Windows XP.
You will see a new window where selected destination to burn is CD drive path.
Now just click on Burn button and the rest of work will be done automatically within sometimes.
Wait till the burning process is going on. Never try to eject CD from CD-Drive during burning process.
After successful burning of CD, it will eject automatically.

Posted on Feb 27, 2016

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

If someone need windows key that i suggest you go site www.funkinyes.com to got. My key got here and after i used is works properly. Hope can help you.

Posted on Feb 17, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Create bootable XP disc


Dell only allows you to make 1 BACKUP Disk. but any Genuine XP iso. is bootable.... infact any genuine OS.iso is bootable... and DELL should auto boot to DVD when you insert the media, and reboot.

Jan 25, 2014 | Dell Microsoft Windows XP Home Edition

1 Answer

Need to reformat my pc,but the bootable cd is deffect, window xp how to recover my bootable cd


why don't try with bootable USB stick ( 4GB) . u have alot of programs to make bootable USB like (rufus_v1.4.1). for more search in google :" create bootable USB windows XP" (something like this ). I hope i helped u. Respect !

Jan 10, 2014 | Microsoft Windows XP Professional With...

1 Answer

Windows xp boot disk


Note: The Microsoft Windows XP CD is a bootable CD and in many cases you should not need a bootable floppy diskette. Booting from the Windows XP CD will allow you to not only install/re-install Windows XP but will also allow you to troubleshoot it.

Create MS-DOS bootable diskette

When formatting a floppy diskette, users have the option of creating a MS-DOS startup disk, follow the below steps to do this.

1. Place diskette in the computer.

2. Open My Computer, right-click the A: drive and click Format.

3. In the Format window, check Create an MS-DOS startup disk.

4. Click Start

Create Windows XP Setup diskettes

Microsoft is beginning to phase out bootable floppy diskettes in favor of bootable CD discs and has not included a method of easily creating a bootable floppy diskette in Windows XP or from the CD. However, Microsoft has downloads available for users who still need to create bootable diskettes to install (not upgrade) Windows XP. These downloads can be found through KB310994.


hope this helps

Sep 24, 2012 | Computers & Internet

1 Answer

I'm looking for a recovery disk for my MSI ms-1013 notebook.


unless you made one or you were provided with an installation disk

Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer)
or

Note: The Microsoft Windows XP CD is a bootable CD and in many cases you should not need a bootable floppy diskette. Booting from the Windows XP CD will allow you to not only install/re-install Windows XP but will also allow you to troubleshoot it.

Create MS-DOS bootable diskette

When formatting a floppy diskette, users have the option of creating a MS-DOS startup disk, follow the below steps to do this.

1. Place diskette in the computer.

2. Open My Computer, right-click the A: drive and click Format.

3. In the Format window, check Create an MS-DOS startup disk.

4. Click Start

Create Windows XP Setup diskettes

Microsoft is beginning to phase out bootable floppy diskettes in favor of bootable CD discs and has not included a method of easily creating a bootable floppy diskette in Windows XP or from the CD. However, Microsoft has downloads available for users who still need to create bootable diskettes to install (not upgrade) Windows XP. These downloads can be found through KB310994.

hope this helps you

Oct 19, 2011 | Computers & Internet

2 Answers

How to create bootable cd?


The following items are required:
  • A copy of the original Windows CD/DVD or ISO.

  • A copy of the Boot Files (Downloaded Below).

  • A minimum of 1GB available hard disk space for CD's.
    A minimum of 5GB available hard disk space for DVD's.

Create a folder called OS on your hard drive (C: is used in this example).

In this folder create two sub-folder called BOOT, and ROOT.


6dce51a.png
Copy the entire Windows 2000/XP/2003 CD (or extract the ISO) into folder ROOT.

1.) Download boot file. (bootfiles-from-tacktech-website.zip ~1.34KB)

2.) Extract the BootSector file (boot.ima) from bootfiles-from-tacktech-website.zip
into the folder C:\OS\BOOT

Start Nero Burning ROM.

Select File > New... from the menu.

f15c96d.png
1.) Select CD-ROM (Boot).
2.) Select Image file from Source of boot image data.
3.) Check Enable expert settings (for advanced users only!).
4.) Set Kind of emulation: to No Emulation.
5.) Set Load segment of sectors (hex!): to 0000.
6.) Set Number of loaded sectors: to 4.
7.) Set Platform identifier: to Intel x86 compatible.
8.) Press the Browse... button.


fdc3fea.png
Locate the BootSector file (boot.ima) in the folder C:\OS\BOOT.

Click the Open button.

9e7f187.png
Click on the ISO tab.

- Set File name length to Max. of 31 chars (ISO Level 2).
- Set Format to Mode 1.
- Set Character Set to ISO 9660 (standard ISO CD-ROM).
- Check the Joliet check box.
- Check all Relax ISO Restrictions.
- Check Allow more than 64 characters for Joliet names.

22923e9.png
Click on the Label tab.

Remove the check from Also use the ISO 9660 text for Joliet.

Enter the Volume Label into the ISO 9660 and Joliet text boxes.

Click the More fields button.

- View Windows 2000 CD Labels (TTID# 269)
- View Windows XP SP0 CD Labels (TTID#226)
- View Windows XP SP1 CD Labels (TTID#283)
- View Windows XP SP1a CD Labels (TTID#312)
- View Windows XP SP2 CD Labels (TTID#342)
- View Windows XP SP3 CD Labels (TTID#422)
- View Windows 2003 Server RTM CD Labels (TTID#292)
- View Windows 2003 Server SP1 CD Labels (TTID#355)
- View Windows 2003 Server R2 Disc Labels (TTID#387)

6519cde.png

Enter in the Volume Label into the System Identifier, Volume Set, Publisher,
Data preparer, Application
text boxes under ISO 9660 and Joliet.

Click the OK button.

5980e4a.png

Click the Burn tab.

- Check Write.
- Check Finalize CD (No further writing possible!).
- Set Write Method to Disc-at-once. (We have had Track-At-Once work as well.)
- Click the New button.

53647cb.png

- Locate the folder C:\OS\ROOT.
- Select everything in the folder and drag it to the ISO compilation panel.
Note: Some files are not show in the following image.
- Click the Write CD Dialog button.

ea7a68a.png

Click the Boot tab.

- Verify the settings. Correct if needed.
- Click the Burn button.


ae6d51d.png
Wait for Disc creation to finish.

21e7008.png
Click the OK button.

Click the Done button.

0df0e75.png

Process completed. You're done.

Regards
Pcs365.8

Jun 01, 2010 | Microsoft Windows XP Home Edition

1 Answer

What is the maximum capacity of harddisk that can support by biostar M7VKS MB (AMD Duron)


It is not about the motherboard but more so about the operating system. If you're using windows XP with SP1 or higher there is no real limit. Windows 98 can see a max of 64GB & windows 98SE, 137GB. Win XP can see a max of 2 exobytes.
(What is 1exobyte?, EB. In decimal terms, an exabyte is a billion gigabytes). Setting up you're drive properley is also very, very important. Download the hard disk drives manufacture setup software. Only connect the new HDD. Create either a bootable floppy disk or a bootable CD from the manufactors site. Boot to the floppy or CD and set up the HDD. This includes sector size FAT NTFS ECT. You will also be able to format the new HDD. When installing windows do not allow windows to format the disk. (Leave it as is). Make sure you're new drive is shown in you're bios before installing windows xxx.

Cheers'
Mike

Jan 22, 2010 | Biostar M7VKS Motherboard

2 Answers

Error when installing XP on Vista


which service pack?? sp1 and 2 dont support sata harddrives you have to get sp3 on a disk or slipstream the drivers into the os cd for sata harddrives

Jun 05, 2009 | Acer TravelMate 5530-5207 Notebook

1 Answer

This S-Ata version for Windows 2000-xp only


To intstall xp sp3 you need to install xp sp 2 then you can go ahead fo xp sp3 installation. Otherwise, install the xp sp3 by bootable CD.

Feb 16, 2009 | Soltek SL-86SPE2 Motherboard

2 Answers

I CANNOT INSTALL WINDOWS XP PRO


u need xp bootable cd then u can directy boot from cd & istall windows xp here is the link for u

windows xp download

Jan 25, 2009 | ASUS P4S800D-X Motherboard

12 Answers

How i can make xp proff service pack 2 bootable pendrive, cd,sdcard


helo frind

1. Windows Xp installation disk 
2. Access to PC with working CD Cd-ROM DVD drive. 
3. This file solution.rar 

This guide is for people with basic knowledge of PC hardware and system software 
Let's start. 

1. Download solution.rar file 
2. Unpack solution.rar file on drive C, you should have a folder named C:\Dos 
3. Put your pendrive ( at least 1GB) into working PC USB port 
4. Go to the folder C:\Dos and run HpUSBformat.exe file 
- it should auto detect wyour pendrive disk, if not select form the list ( my pendrive is a drive G: ) 
- set other options like on the image below and click start. 


- now you have a pendrive with bootable dos on it. 
5. Copy all other files from C:/Dos to your pendrive. ( you can overwrite existing ones) 
- your pendrive should look like that 



6. Put your Windows Xp installation disk into Cdrom and copy all files from CD to pendrive.

good_lk

Oct 12, 2007 | Microsoft Windows XP Professional With...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2727 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...