Question about Mitsubishi WD-52525 52" Rear Projection HDTV

1 Answer

Convergence board About two months ago my mother in law turned off my Mitsubishi VS-45609 45" projection television during a lightning storm. When we turned it back on the color in the screen was off. We have red lines and "ghosting" in the picture. My first thought was to check the menu for video settings but none of these fixed my problem. My husband called the manufacturer who said the convergence board was bad. I called the manufacturers parts line to order a new one and they do not have a listing for the part. She said the convergence unit may be on a board with other components in the television. I dont know anything about televisions. Please help me get my T.V. fixed we miss it terribly. I have a 42" Rear Projection Mitsubishi TV that works fine most of the time, however it will start ghosting with more red shadowing. I guess that this is a convergence problem? The problem is intermittent. Most of the time I can turn tv off and then back on and it will go away. Any suggestions

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,617 Answers

Your model uses a convergence IC Its a STK393-110 you can get a new replacement at the following link and they will provide free instalation instructions with pictures so you can do the repair yourself. They also offer free tech support to all their customers. heres the link.
http://servicemanuals.vstore.ca/

Posted on May 31, 2008

2 Suggested Answers

yankeegurl
  • 121 Answers

SOURCE: Mitsubishi VS 45609 Blue Shadow On TV Picture

you need to replace the convergence IC STK393-110 you can get it as well as picture installation instructions as well as free online tech support at the link I posted very good prices
http://servicemanuals.vstore.ca/

Posted on May 10, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Color distortion, hazy snowy screen with thin red lines, suddenly happened had perfect pic 24 hours ago


Tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board is dead.The tv convergence board require replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Feb 01, 2011 | Mitsubishi VS-50705 50" Rear Projection...

1 Answer

Unable to flash focus, red curved lines at the top of screen, manual convergance will not work, problem started after a lightning storm with power surge


Ur tv now,totally have dead parts,on the tv convergence board.That,why ur flash foucus or manual covergence alignment R,G,B colors line will not matches up.The convergence board parts 2 STK convergence ICS and some or all it resistors,must be replaced to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jul 29, 2010 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Mitsubishi VS-50609 - Red convergence is way off, suddenly


You have a bad ground on a convergence IC. You will have to carefully pull this board out and resolder the pins. If this does not solve the problem you will have to replace the ICs. I have saved a few of these TVs with just a resolder job. Thanks for asking!

Jul 11, 2010 | Mitsubishi VS-50609 50" Rear Projection...

1 Answer

I have a mitsubishi VS-50801 rear projection TV that has a very distorted and glichy picture


Ur tv convergence are dead.Ur tv convergence board require changing the 2 STK convergence ICS,and some or all it resistors.The shop will cost u $300-$350 for parts and labors.

May 19, 2010 | Mitsubishi VS-50805 50" Rear Projection...

1 Answer

I have a convergence problem on my Mitsubishi VS-55601


ICS with some resisters,tries these websites Tv rpair Word.com or Tv repair kits.

Nov 02, 2009 | Mitsubishi VS-55601 55" Rear Projection...

2 Answers

Mitsubishi 50605 Convergence Board - Replacement?


Replacing the whole board will fix it, but is a bit of overkill. If you can solder and feel comfortable working inside the set, you can fix this yourself. Let me know if you wish to attempt the repair and I'll proviode additional details and instructions.

Dan

Oct 13, 2008 | Mitsubishi VS-50605 50" Rear Projection...

1 Answer

Mitsubishi Convergence Problem


you need to replace the convergence board but it will cost you around $200 to fix the board and components associated with it .......
Have you tried adjusting the convergence settings ........

Oct 13, 2008 | Mitsubishi VS-50605 50" Rear Projection...

2 Answers

Mitsubishi VS-45605 convergance


you will need to replace both convergence i.c.s as a pair

Nov 27, 2007 | Mitsubishi VS-45605 50" Rear Projection...

1 Answer

Double shadows


requires a service call to be realigned ,your convergence ic's have lost their settings from the eeprom ic(memory),look in your menu settings to see if you have auto-focus if there activate it and if the ic;s are still ok it should fix it.

Nov 08, 2007 | Panasonic PT-51HX41 51" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1198 Answers

The Knight
The Knight

Level 3 Expert

69795 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...