Question about Zodiac Baracuda Zippy Pool Cleaner

1 Answer

I have a Zodiac Baracuda G3 pool cleaner once the the pump switches off at night the next morning creepy does not sit flat on the bottom of the pool the front side stands up in the the air if you lift the hose and help the creepy to get suction to floor it works fine until pump switches off again.Please assit?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 640 Answers

It sounds like your house weights need to be adjusted. When the pool cleaner is resting, it should always sit at a 45 degree angle on the bottom of the pool. If it stands up on the front side, try sliding the weight away from the cleaner head. You may need to make several small adjustments to get the balance right, but this is almost surely your problem. Here is a copy of the users manual if you want to read more about hose weights and balance:

http://www.baracuda.com/resources/manuals/TL-2050.pdf

Posted on May 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Barracuda G3 manual


http://www.zodiacpoolsystems.com/Products/Cleaners/Suction/Zodiac-G3.aspx

Bottom of the page labeled downloads

Apr 08, 2013 | Zodiac Baracuda Zippy Pool Cleaner

1 Answer

Ihave pulled my baracuda apart and have no instructions on how to put it back together.


Below is a copy of the users manual for these pool cleaners from the Zodiac website. It has detailed instructions and illustrations that will show you how to put the cleaner back together.

http://www.baracuda.com/resources/manuals/TL-2050.pdf

Jan 11, 2011 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

How to put on the pressure regulator


Here is a copy of the users manual for the G3 pool cleaners from the Zodiac website. Any set up and installation instructions that you need should be in the manual.

http://www.baracuda.com/resources/manuals/TL-2050.pdf

Jan 08, 2011 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

I took my creepy apart and I can't get it back together. Could I have a schematic?


Your picture says that you have a baracuda, but if you have a kreepy I can help. Here is the owners manual for the Kreepy Krawly. These automatic pool cleaners are not hard to get back together with instructions.

http://www.backyardcitypools.com/images/pentair/kreepy_krauly_manual1.pdf

Jul 15, 2010 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

My Baracuda Zodiac works for a few minutes and


check the diaphragm for debris, damage, or deformity. unthread the collar above the handle and push the tube downward. Inspect the rubber diaphragm, any damage or deformity will cause erratic behavior.

Apr 07, 2010 | Zodiac Baracuda G3 Automatic In Ground...

2 Answers

My baracuda G3 stop working is not pulsating and therefore not moving. I checked the suction and the hoses even the diaphram everything looks ok.


If you have suction at the bottom of the cleaner, there has to be a problem with the diaphragm. I would remove it and recheck.

Feb 01, 2010 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

My baracuda is pulsating and moving but surfaces


The control should be below the water, and if you cut the suction down that should help with the cleaner.

Dec 22, 2009 | Zodiac BARRACUDA G3 IN-GRND CLEANER

1 Answer

Zodiac g3 doesnt move


Diaphragm ripped. Replace with new one

Jun 09, 2009 | Zodiac Baracuda G3 Automatic In Ground...

1 Answer

Baracuda G3 zodiac Clings to bottom or sides moving slowly


here is a link to the Technical Support at Baracuda. this should be able to solve your problems. initially sounds like maybe too much suction.

Feb 25, 2009 | Zodiac BARRACUDA G3 IN-GRND CLEANER

Not finding what you are looking for?
Zodiac Baracuda Zippy Pool Cleaner Logo

Related Topics:

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zodiac Pool & Spa Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

john h

Level 3 Expert

12650 Answers

Jay Finke
Jay Finke

Level 3 Expert

1358 Answers

Are you a Zodiac Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...