Question about RCA L26WD26D 26 in. LCD TV

1 Answer

MODEL L26WD26D has sound but no picture what can it be?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

It can be the 24vdc power supply problem or the back light inverter boards problem, or T-CON board, main board.
First, look at the screen in darkened room to see if you can see any slight glow from the screen, if it does, then the problem can be the T-CON (not getting the 12vdc) or the main logic board not feeding the signals to the T-CON board.
if not, next place to check will be the power supply module, make sure it has 24vdc which is required by the backlight inverter to work, the reason for not having 24vdc can be from bad DC filter caps (leaking/bulging top, high ESR) or short circuits in the inverter board which will cause the 24vdc supply to go into shutdown mode, so you may have to disconnect the power cable that feed the inverter board to see if the 24vdc will work without the inverter board hookup, you will need to apply about 3~4 amp of load to the 24vdc to make sure it can handle that. There are fuses on the backlight inverter boards also. So there is some troubleshooting you will have to do to find out the causes of the problem you are having.

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.

Posted on Oct 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When you turn on my TV, the screen is completely white. No sound, no picture. I've unplugged and powered off but the screen still stays white.


It sounds that the main digital processor board has failed. Contact any service technician, before make it sure.

Aug 22, 2013 | RCA L26WD26D 26 in. LCD TV

1 Answer

L26WD26D


It sounds like power supply or could be main board as remote has direct power whenever set is plugged in--standby supply powers that so if the remote has issue at same time the standby which is usually on main power board may have a odd issue.

Have you looked for puffy caps on power board?



6_11_2012_5_31_14_pm.jpg6_11_2012_5_32_01_pm.jpg

Jun 10, 2012 | RCA Televison & Video

1 Answer

I HAVE A LINE THAT GOES THROUGH THE SCREEN FROM TOP 2 BOTTOM ON MY RCA L26WD26D


the LCD panel has failed but i know of no one that has a replacement panel for that model get the genaric number off the panel on a white sticker and do a search .maybe some one will have a good pullout

Dec 22, 2009 | RCA L26WD26D 26 in. LCD TV

1 Answer

TV Turns on and turns off no picture and no sound does this for about a minute and then completly turns off


It sounds like a short circuit somewhere inside. The circuit breaker keeps tripping until it gets too hot and then stays open until it cools off

Oct 01, 2009 | RCA L26WD26D 26 in. LCD TV

1 Answer

LCD tv shows picture on only half of the screen,other half dark


usually the result of a bad connection inside the unit. Best to have a certified tech look into it. Julio milleniumtvsvc@gmail.com

Jul 22, 2009 | RCA L26WD26D 26 in. LCD TV

1 Answer

Cant see information bar on top or bottom of picture on my tv


On the remote, press the picture size button until you can see what you want. there are 4 or 5 different sizes available, dependine on the TV.

May 03, 2009 | RCA L26WD26D 26 in. LCD TV

1 Answer

42" LCD tv shows picture on only half of the screen,other half dark!


The T-Con board (otherwise known as LVDS) connects to two seperste parts of the LCD panel. If you do have half a picture (left or right) replacing the T-Con board should resolve this issue. Open your TV, find the part number and search on eBay or at sites like www.flattvparts.co.uk where you can search by TV model number.

Oct 27, 2008 | RCA L26WD26D 26 in. LCD TV

2 Answers

RCA L26WD26D


sorry dear...just got disconnected

Feb 29, 2008 | RCA L26WD26D 26 in. LCD TV

Not finding what you are looking for?
RCA L26WD26D 26 in. LCD TV Logo

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...