Question about D-Link AirPlus DI-524 Wireless Router

1 Answer

Wan light is not on - D-Link AirPlus DI-524 Wireless Router

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,768 Answers

1.Log into router. Using either 192.168.0.1 to 192.168.1.1 in a browser window that is ( internet Explorer or Firefox)
2. Verify wireless router name( on the computer) >>> ( on/off) ( router status window)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address. This set up in the "security tab" in the router. using 192.168.0.1 or 192.168.1.1 to access through a browser.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.
8. check for firmware update at the manufacturers site for your model router

Posted on Oct 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

INET light is on not able to connect to internet


Checked the instruction manual online. There's no INET light indicated. There's Power, Status, WAN, WLAN, and LAN LEDs. The WAN LED only indicates that the WAN port is connected to another device, e.g., cable or DSL modem. Check on your cable or DSL modem to see if the Internet light is on. If so, then you'll need to log into your router and go through the configuration/setup per the manual for your type of connection.

Oct 18, 2013 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Wan light is stable not blinking


I would say that is normal as the wan light on my modem is stable The blinking lights are the ethernet and internet lights

Jun 24, 2013 | D-Link Computers & Internet

1 Answer

No wan light


WAN detects Internet - No WAN = no Internet detected going through... Call ISP first

Mar 15, 2010 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

How to turn WLAN switch


on the Phat PSP the wan switch is on the lower left side. slide it down and the WAN light should turn on. on the Slim PSP the wan switch is located on the top.

Jun 21, 2009 | Sony PSP (Piano Black)

1 Answer

No wan light


If no wan light bypass the dlink router and check if ethernet cable connected to wan port is working. Once you are able to go online through modem connect cable to WAN if light does not go on log into oruter and clone mac address and save settings.If doesnt work powercycle router and turn modem on first then router next if doesnt work upload latest firmware.

Sep 05, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

WAN 2 dissconnects


Try check with your subnets, if your subnet on your SBS is the same as your Xincom configuration and both your SBS and XIncom is acting as a DHCP server, it might cause a conflict.

Jan 19, 2008 | Xincom XC-DPG502 Router

1 Answer

DGL-4300 resets every few seconds


Try the following:
1. Hook up your router like you want it to be
2. After the WAN/Wireless lights turn off we want to HARDRESET your router.
3. There will be a small hole that requires a pen or paper clip to press...Hold this down for about 15 seconds, or untill the power light flashes on your router.

This might take care of it.

let me know.

Jan 10, 2008 | D-Link GamerLounge DGL-4300 Router...

1 Answer

Dynamo R-ADSL-C4W-EG WAN light


Have you conifgured it with the proper credentials? PPPoE or PPPoA? (since using a filter normally indicates a DSL connection)

Dec 22, 2007 | Computers & Internet

1 Answer

D-link wirless router


The network cable from your broadband or DSL modem needs to be plugged into the WAN port on the router. If the modem is connected to your provider, then the WAN light should remain on...

Without more info on your setup, this is difficult to diagnose.

Hope this helps!

Oct 27, 2007 | D-Link AirPlus DI-524 Wireless Router

1 Answer

My WAN light keeps flashing while the M1 amber light remain fix at ON(M2 amber light = OFF)


You must have done something wrong when upgrading the firmware. because there are pre-requisite settings on the computer before performing an upgrade. Like setting static ip and forcing  card to 10mb/half only prior to upgrading. If this flashing is unusual, then you mightn have damage the wan port.

just to let you know, wan port will really flash but not that continous.  

Oct 06, 2007 | D-Link DI-704P Router

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...