- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
before you connect anything to a computer with an USB cable, you have to install the software that came with the device. No software, no working device. That is all. When you lost the CD, you could try on the support page from Kyocera, if they can help you with the correct software and drivers.
first no need to connect your printer with computer so Just run the setup from the given CD by the company and in most of cases during installation software request to connect printer with computer. if it asks for printer to connect then connect the printer with the USB cable. and then follow as software. it will work fine.
Printer have two connecting ports. 1 is for power and 2nd is for computer connection.
i am hopefull that u can understand well.
please dont forget to rate my answer cuz it is valueable for me.
you printer should still come on when power is plugged in. and once you conect your printer to the computer it should automatically install the drivers for it. you can also go to hp.com to find the drivers and software.
it is connected to the pc through USB wire.and u need printer driver installation cd.if u have these both then follow this direction 1)right click the my computer icon 2)click properties and then click hardware n go to device manager. 3)uninstall all usb ports and then scan for hardware changes 4)ur pc will detect your printer and ask for printer drivers 5)re load drivers and your pc will communicate with your printer 6)for reloding install the cd follow the instructions on the screen and click next 7)restart when the printer is loded.connect the wires and cords properly.
Follow this link and download the file ip1500xp180usZ.exe in the driver section.
When you'll get it, make sure that your printer is not connect with your computer.....Install the driver first and when it's done connect your USB cable to your printer...it will says new hardware found and it will install it self !
If you have a different OS (win 98 or 2000) at the link you'll see over the driver section choice box where you can select your OS...
Do you have windows xp for os ???? If so deinstall your printer on your computer and disconnect your usb connection.
First install the driver by putting your cd in your computer...Some product will tell you when to connect your usb cable to your computer...if not, make sure your driver is correctly install. After, reboot your PC and plug-in your usb cable and power up your printer....