Question about Sony Handycam DCR-SR200 Camcorder

3 Answers

Sony dcr sr 200 camcorder doesn' turn on

My new sony dcr sr200 sony camcorder doesn't turn on. When powered on it blinks and then shus off. Also it looks like the shutter is stuck and the shutter is open even on off mode, Pls help

Posted by on

  • 1 more comment 
  • tanzir Jul 15, 2008

    my sony dcr sr200 sony camcorder doesn't turn on. When powered on it blinks and then shus off. Also it looks like the shutter is stuck and the shutter is open even on off mode, Pls help


  • bhav2009 Apr 24, 2009

    my sony dcr sr200 sony camcorder doesn't turn on. When powered on it blinks and then shus off. Also it looks like the shutter is stuck and the shutter is open even on off mode, Pls help

  • Senor7 May 11, 2010

    My sony dcr sr200 , when switched on is showing only showers on the lcd.Before it would show showers but after a short while would show the clear image . Now it is continously showing showers

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

LCD ribbon cable is probably the culprit.

Posted on Jul 07, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Hi,
I am also having the same problom. I found the problom is with the ribbon cable which is coming from the camera to LCD ,which may be brocken. As a result the LCD can just blink and switch off the cam.some times we adjust the LCD possition it works for a while then will turn off the camera. I am searching for the parts.

george

Posted on Dec 22, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Battery may be out of charge, check the camera by power up with battery charger pluged in ac outlet.

Posted on May 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony Handycam DCR-SR200 e:91:01 means?


From page 32 of the user manual that is available for download here: (click here)

The error message that you are seeing requires that you to take the camera in for service, since a failure has occurred that the owner cannot fix themselves:

E:20:ss / E:31:ss / E:61:ss / E:62:ss / E:91:ss / E:94:ss

A malfunction that you cannot service has occurred. Contact your Sony dealer or local authorized Sony service facility. Inform them of the 5-digit code, which starts from E

Nov 26, 2011 | Sony Handycam DCR-SR200 Camcorder

1 Answer

My Sony Handycam DCR-SR200 Camcorder has no display


The flexy cable between lcd and main pcb is faulty replace it

Aug 08, 2011 | Sony Handycam DCR-SR200 Camcorder

1 Answer

My sony handycam DCR-SR200 's lcd touch srceen is not giving response whille touching.what to do


If the touch screen of the Camcorder is not working, please follow the troubleshooting steps.


Please make sure that you're using fully charged batteries.


Turn off the Camcorder and turn ON again and check the operation.


Try resetting the Camcorder by pressing the reset button behind the LCD panel.


shajanrs_91.jpg If the issue persists again, please perform LCD screen Calibration and check if that helps.


Please follow the steps below to perform the LCD Calibration


shajanrs_92.jpg shajanrs_93.jpg

If the issue persists, perform a power resetting of the Camcorder. To perform power resetting, please remove the battery pack, turn the Power switch to ON for more than 15 seconds, turn the Power switch to OFF position and then reinsert the battery pack.


If the issue persists even after performing all the above-mentioned steps, service is required.


I hope this information will help you to resolve the touch screen issue of the C



Thanks for understanding.

Dec 31, 2010 | Sony Handycam DCR-SR200 Camcorder

1 Answer

Guide


Click Sony Support to download guide book for DCR-SR200

Jun 24, 2010 | Sony Handycam DCR-SR200 Camcorder

2 Answers

Sony DCR-SR200 digital Camcorder LCD is so dim I can hardly make it out. is this a user fixable problem?


No, it's most likely a broken flex LCD cable. It goes through the hinge and brakes very often. You should contact SONY and see if they would repair this for free (if you're out of warranty) as it's a factory problem.

I work for Sony.

Tom

Oct 27, 2009 | Sony Handycam DCR-SR200 Camcorder

2 Answers

Sony DCR-SR200 screen slowly "scrolls" vertically like the V-Hold on an old television


After researching various flexible cable numbers from different posts, I found that the SR-200 uses a unique cable, FP-610, part number 187145711. This has been discontinued and replace with part number 187145721 (same cable also used in DCR-SR300).

If you are in doubt with your camera, just take it apart up to the point of seeing the ribbon cable. The part number is printed on the side.

I found two sources for this so far, www.nexttronics.com and https://servicesplus.us.sony.biz/sony-parts.aspx. Price ranged from $30 to $40 plus shipping.

Jul 21, 2008 | Sony Handycam DCR-SR200 Camcorder

1 Answer

SONY DCR-SR200


DCR-SR200 is complicated camera and pls contact nearest Sony service shop for proper repair.

Jul 15, 2008 | Sony Handycam DCR-SR200 Camcorder

Not finding what you are looking for?
Sony Handycam  DCR-SR200 Camcorder Logo

Related Topics:

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

kakima

Level 3 Expert

96372 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...